Daverods project 66 - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Strodder · 06-06-2009, 09:54 AM

Quote:

Originally Posted by daverod

I never even thought about using the gas tank.

I was happy with the disk brakes and the rear end, I aready had the power steering and power brakes. I don't think my camera has macro. I guess no close ups. They just make my welds look bad anyways. From a distance they look ok.

That's what they make grinding disc for.

daverod · 06-06-2009, 10:20 AM

Ya I'm a hell of a grinder. Spend more $ on grinding wheels then wire. Learned an important lesson late last night. Dont grind with your slippers on.

Alan's Classic · 06-06-2009, 08:56 PM

Quote:

Originally Posted by daverod

Ya I'm a hell of a grinder. Spend more $ on grinding wheels then wire. Learned an important lesson late last night. Dont grind with your slippers on.

Also don't weld with shirt tucked in or tennis shoes or wear boots with shorts unless you tape the top of your boots tight. I've been there and done that.

Strodder · 06-07-2009, 11:12 AM

Quote:

Originally Posted by Alan's Classic

Also don't weld with shirt tucked in or tennis shoes or wear boots with shorts unless you tape the top of your boots tight. I've been there and done that.

I have so much grindings in my body, I'm immuned to them.

Except my eyes. Don't forget eye protection.

daverod · 06-09-2009, 07:15 PM

Put my my pistons in my engine last night. Now I need to order a cam. I was thinking about getting a Edelbrock performer cam/manifold from Jegs. What do you think? Took the sides off my trailer I bought. Welded up most the holes. Should get my 71 sub this weekend.

Flatbed trailer for free!!!! I should put it on CL before the neighbors *****.

**Captainfab** · 06-10-2009, 12:27 AM

I don't buy from Jegs much, but Summit has the same cam as the Edelbrock Performer available in their Summit brand cams for a lot less than with the Edelbrock name on it.......same exact cam. You can also get that cam from Northern in the Speed Pro line for less $$.

daverod · 06-10-2009, 02:05 PM

Thanks Capt. I'm always into saving $.

ChuckDriver · 06-10-2009, 02:10 PM

Love the Impala Dash, putting one in my 57!!

daverod · 06-13-2009, 03:01 PM

Guy dropped off my parts sub. $250 delivered. Looks like it has a 350. I was hoping to use the gas tank but it looks huge. Thought I better take a pic before I cut it up into little pieces

joe231 · 06-13-2009, 10:53 PM

cool! even has A/C...that is quite a score for $250

**scotts62** · 06-13-2009, 11:00 PM

Cool!

ChuckDriver · 06-14-2009, 10:39 AM

Are you parting this one out?

daverod · 06-14-2009, 02:32 PM

Not to many good parts. I'm going to use the cross member and disk brakes/ rear end. I think I'm going to keep the engine and use it for a 383. I don't know about the trans. Other than that the thing is a rust bucket. The front windshield is good and the door glass is good. Other than that is going to the dump.

daverod · 06-14-2009, 02:44 PM

Engine and trans out. I was hoping the flex plate was good but it has some damage on the side of the gears. Hack and wack . A carpenter with a saws all is a dangerous thing.

daverod · 06-15-2009, 06:20 PM

Took the front cross member out. Got rid of the cab. What a pain I did'nt have a title for it so it took longer to get rid of then I had planed. Tomorrow I'll take the rear end out, get rid of the rest of the sub. and get my garage cleaned up.

Alan's Classic · 06-15-2009, 08:24 PM

Man your not wasteing any time.

daverod · 06-16-2009, 07:52 PM

5 Saws All blades later and I have what I really wanted, 5 lug axles, disk brakes and better gears. I did'nt really want the engine and trans but I'll deal with it. Salvage yard gave me $50 for the rust.

Tomorrow I'll break it all down and clean it up.

Parts fairy brought me my cam and intake manifold. All in all a good day, except when the high lift jack decided to slap me in the face. Got to be more careful when going down.

Strodder · 06-16-2009, 09:08 PM

Good idea Dave. I did the same thing.

**scotts62** · 06-17-2009, 07:33 AM

Dang man you got after it! i haven't been on in a few days and now its just wheels showing

daverod · 06-17-2009, 08:02 AM

Quote:

Originally Posted by scotts62

Dang man you got after it! i haven't been on in a few days and now its just wheels showing

"Saws All" really helps. It's the third one I've done in 6 months. Helps a lot to just get all that sheet metal out of the way. Since I don't have a very big trailer I have get it into bit size pieces.

daverod · 06-17-2009, 09:19 AM

Quote:

Originally Posted by Strodder

Good idea Dave. I did the same thing.

It's from guys like you(people who really know what they're doing) that I got the idea. You're right it is a good idea and a good way to save some $$$$. I was looking over your thread I was surprised to see snow.

Strodder · 06-17-2009, 11:05 AM

Quote:

Originally Posted by daverod

It's from guys like you(people who really know what they're doing) that I got the idea. You're right it is a good idea and a good way to save some $$$$. I was looking over your thread I was surprised to see snow.

It snows lightly here, but rarely. This was unusual though. We got 15"s. I loved it with the Yamaha Rhino. I had a blast.

daverod · 06-17-2009, 12:55 PM

You got a step notch and bags on that thing?

We use snow machines here.

Strodder · 06-17-2009, 03:11 PM

Quote:

Originally Posted by daverod

You got a step notch and bags on that thing?

We use snow machines here.

That's cool

daverod · 06-17-2009, 06:12 PM

Spent the morning breaking down the front end and cleaning up. Took everything to the car wash. $10 later things clean enough for sand blasting. Don't know if I'm going to paint or powder coat. Powder coat guy would'nt give me a price over the phone he wanted to see the parts. I'll break the arms down more tomorrow. Take the lower arms to get the joints pressed out?: exit:

06-06-2009, 10:20 AM	#177
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Ya I'm a hell of a grinder. Spend more $ on grinding wheels then wire. Learned an important lesson late last night. Dont grind with your slippers on.

06-09-2009, 07:15 PM	#180
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Put my my pistons in my engine last night. Now I need to order a cam. I was thinking about getting a Edelbrock performer cam/manifold from Jegs. What do you think? Took the sides off my trailer I bought. Welded up most the holes. Should get my 71 sub this weekend. Flatbed trailer for free!!!! I should put it on CL before the neighbors *****. Attached Images

06-10-2009, 12:27 AM	#181
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Daverods project 66 I don't buy from Jegs much, but Summit has the same cam as the Edelbrock Performer available in their Summit brand cams for a lot less than with the Edelbrock name on it.......same exact cam. You can also get that cam from Northern in the Speed Pro line for less $$. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-10-2009, 02:05 PM	#182
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Thanks Capt. I'm always into saving $.

06-10-2009, 02:10 PM	#183
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Daverods project 66 Love the Impala Dash, putting one in my 57!! __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

06-13-2009, 03:01 PM	#184
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Guy dropped off my parts sub. $250 delivered. Looks like it has a 350. I was hoping to use the gas tank but it looks huge. Thought I better take a pic before I cut it up into little pieces Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 06-13-2009 at 03:01 PM.

06-13-2009, 10:53 PM	#185
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Daverods project 66 cool! even has A/C...that is quite a score for $250 __________________ *CHEVY ONLY*

06-13-2009, 11:00 PM	#186
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Daverods project 66 Cool! __________________ Scott 93 crew cab build Project 62

06-14-2009, 10:39 AM	#187
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Daverods project 66 Are you parting this one out? __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

06-14-2009, 02:32 PM	#188
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Not to many good parts. I'm going to use the cross member and disk brakes/ rear end. I think I'm going to keep the engine and use it for a 383. I don't know about the trans. Other than that the thing is a rust bucket. The front windshield is good and the door glass is good. Other than that is going to the dump.

06-14-2009, 02:44 PM	#189
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Engine and trans out. I was hoping the flex plate was good but it has some damage on the side of the gears. Hack and wack . A carpenter with a saws all is a dangerous thing. Attached Images Last edited by daverod; 06-14-2009 at 02:45 PM.

06-15-2009, 06:20 PM	#190
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Took the front cross member out. Got rid of the cab. What a pain I did'nt have a title for it so it took longer to get rid of then I had planed. Tomorrow I'll take the rear end out, get rid of the rest of the sub. and get my garage cleaned up. Attached Images

06-15-2009, 08:24 PM	#191
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Daverods project 66 Man your not wasteing any time. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

06-16-2009, 07:52 PM	#192
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 5 Saws All blades later and I have what I really wanted, 5 lug axles, disk brakes and better gears. I did'nt really want the engine and trans but I'll deal with it. Salvage yard gave me $50 for the rust. Tomorrow I'll break it all down and clean it up.Parts fairy brought me my cam and intake manifold. All in all a good day, except when the high lift jack decided to slap me in the face. Got to be more careful when going down. Attached Images Last edited by daverod; 06-16-2009 at 07:56 PM.

06-16-2009, 09:08 PM	#193
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Good idea Dave. I did the same thing. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*



Register or Log In To remove these advertisements.

06-17-2009, 07:33 AM	#194
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Daverods project 66 Dang man you got after it! i haven't been on in a few days and now its just wheels showing __________________ Scott 93 crew cab build Project 62

06-17-2009, 12:55 PM	#198
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 You got a step notch and bags on that thing? We use snow machines here. Attached Images

06-17-2009, 06:12 PM	#200
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Spent the morning breaking down the front end and cleaning up. Took everything to the car wash. $10 later things clean enough for sand blasting. Don't know if I'm going to paint or powder coat. Powder coat guy would'nt give me a price over the phone he wanted to see the parts. I'll break the arms down more tomorrow. Take the lower arms to get the joints pressed out?: exit: Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.