1960-1972 Lowering Block U bolts - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**way2lo2** · 03-14-2013, 08:10 AM

Quote:

Originally Posted by rin68

Do you have a set of 2" block and u-bolts available? Please send a PM with shipping to 61611. Thanks

sent you a PM

rin68 · 03-14-2013, 07:13 PM

PM may not have gone through - do not see one in my inbox

Also - I assume you are the same way2lo2 selling these on ebay?

**way2lo2** · 03-14-2013, 07:29 PM

Quote:

Originally Posted by rin68

PM may not have gone through - do not see one in my inbox

Also - I assume you are the same way2lo2 selling these on ebay?

yep, same one as eBay

67_ShortFleet · 04-03-2013, 12:37 PM

Interested in bolts for some 1.5 inch blocks I have. Are they still avaliable? $34.90 right?

**way2lo2** · 04-03-2013, 12:41 PM

Quote:

Originally Posted by 67_shortfleet

interested in bolts for some 1.5 inch blocks i have. Are they still avaliable? $34.90 right?

1 or 2 inch only

67_ShortFleet · 04-03-2013, 02:40 PM

Quote:

Originally Posted by way2lo2

1 or 2 inch only

I only need bolts. I can cut them down if to long.

**way2lo2** · 04-03-2013, 02:42 PM

Quote:

Originally Posted by 67_ShortFleet

I only need bolts. I can cut them down if to long.

sorry, I didn't read it through thoroughly, yes 34.95 shipped Paypal Way2Lo2@aol.com
thanks

67_ShortFleet · 04-03-2013, 02:48 PM

Payment sent.

**way2lo2** · 04-03-2013, 02:55 PM

u bolts on the way

jae · 04-05-2013, 03:58 PM

Wish you were still doing the 1.5" blocks, but I suppose I can always cut down a 2".

Would you mind sending me a price for 2" blocks and hardware shipped to 77406? ('71 C10, coil spring rear)

**way2lo2** · 04-05-2013, 04:04 PM

Quote:

Originally Posted by jae

Wish you were still doing the 1.5" blocks, but I suppose I can always cut down a 2".

Would you mind sending me a price for 2" blocks and hardware shipped to 77406? ('71 C10, coil spring rear)

69.95 for block and u bolt kit. We accept PayPal at way2Lo2@aol.com
Thanks
Posted via Mobile Device

67_ShortFleet · 04-06-2013, 12:56 PM

Quote:

Originally Posted by way2lo2

u bolts on the way

Got them today! Thanks

jae · 04-12-2013, 12:04 PM

Got them in yesterday. Thanks!

shawno72 · 04-18-2013, 09:16 PM

Hey Boris I'll take another set if the 2" blocks and ubolts.
Posted via Mobile Device

Sid138 · 04-18-2013, 10:23 PM

1" blocks and u bolts. Payment and pm sent.

blazins10 · 04-19-2013, 01:11 AM

is it poss for 3 in blocks
Posted via Mobile Device

68_chop_top · 04-25-2013, 11:49 PM

send some 2" lowering u bolts for my 68
I had 2" lowering blocks and bolts but was too low
sawed one in half and trimmed the bolts
now I have a big block up front and the rear is too high
going back to the 2" lowering blocks which I kept
but no going back to the bolts I cut.
PM left and paypal sent
thanks

68_chop_top · 05-04-2013, 09:03 AM

Thank you Boris
This is great, send money get great parts in the mail.
Great quality stuff also.
Installed them yesterday, very happy with the look.
The top of the rear tires are just slightly tucked under the fenders.
BEST TO YOU in all you do and thank you for doing this on the forum.

**way2lo2** · 05-04-2013, 09:10 AM

Quote:

Originally Posted by 68_chop_top

Thank you Boris
This is great, send money get great parts in the mail.
Great quality stuff also.
Installed them yesterday, very happy with the look.
The top of the rear tires are just slightly tucked under the fenders.
BEST TO YOU in all you do and thank you for doing this on the forum.

And I appreciate the business!!! Thank you!

Tshort1 · 05-15-2013, 02:51 PM

Would you mind sending me 2" blocks and hardware. PayPal is on the way. Thanks.

Tshort1 · 05-15-2013, 02:56 PM

Payment sent.

**way2lo2** · 05-15-2013, 09:50 PM

Quote:

Originally Posted by Tshort1

Payment sent.

you got it!! be back from goodguys on monday and will ship then.
Thanks

brownbag40 · 05-15-2013, 11:25 PM

How much for a set of 1" and hardware?

**way2lo2** · 05-16-2013, 07:53 AM

Quote:

Originally Posted by brownbag40

How much for a set of 1" and hardware?

69.95 and includes USPS priority mail shipping. We take visa/mc over the phone and accept paypal @ Way2Lo2@aol.com
Thanks

brownbag40 · 05-16-2013, 12:19 PM

Payment sent!
Posted via Mobile Device

03-14-2013, 07:13 PM	#177
rin68 Senior Member Join Date: Mar 2000 Location: East Peoria, IL Posts: 600	Re: 1960-1972 Lowering Block U bolts PM may not have gone through - do not see one in my inbox Also - I assume you are the same way2lo2 selling these on ebay?

04-03-2013, 12:37 PM	#179
67_ShortFleet Registered User Join Date: May 2008 Location: Eastern Iowa Posts: 423	Re: 1960-1972 Lowering Block U bolts Interested in bolts for some 1.5 inch blocks I have. Are they still avaliable? $34.90 right? __________________ Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924 My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED!

04-03-2013, 02:48 PM	#183
67_ShortFleet Registered User Join Date: May 2008 Location: Eastern Iowa Posts: 423	Re: 1960-1972 Lowering Block U bolts Payment sent. __________________ Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924 My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED!

04-03-2013, 02:55 PM	#184
way2lo2 way2lo2 Join Date: Sep 2004 Location: Cleveland , Ohio Posts: 803	Re: 1960-1972 Lowering Block U bolts u bolts on the way __________________ Dealer for Billet Specialties, Ridetech, Airlift, Vintage Air and others. Feel free to call, email, or PM for a quote. 216 481-5219 office 216 481-4240 fax 216 789-1647 mobile Way2Lo2@aol.com <----also my paypal http://www.hubgarage.com/mygarage/way2Lo2

04-05-2013, 03:58 PM	#185
jae Registered User Join Date: Mar 2013 Location: Richmond Posts: 77	Re: 1960-1972 Lowering Block U bolts Wish you were still doing the 1.5" blocks, but I suppose I can always cut down a 2". Would you mind sending me a price for 2" blocks and hardware shipped to 77406? ('71 C10, coil spring rear)

04-12-2013, 12:04 PM	#188
jae Registered User Join Date: Mar 2013 Location: Richmond Posts: 77	Re: 1960-1972 Lowering Block U bolts Got them in yesterday. Thanks!

04-18-2013, 09:16 PM	#189
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 1960-1972 Lowering Block U bolts Hey Boris I'll take another set if the 2" blocks and ubolts. Posted via Mobile Device

04-18-2013, 10:23 PM	#190
Sid138 Registered User Join Date: Mar 2012 Location: Valdese, NC Posts: 90	Re: 1960-1972 Lowering Block U bolts 1" blocks and u bolts. Payment and pm sent. __________________ 1972 C/10 short step, 327/TH350, Blue Print H8002k Aluminum heads, 268 Lunati Voodoo cam, Lunati lifters, valve springs, roller rockers and Summit Racing dbl roller timing chain, Holley 670 Street Avenger dual line carb, Edelbrock RPM Air Gap intake, Summit ceramic coated long tube headers, Flowmasters, 3:73 gear, 15x10 Wheel Vintique Rallys w/ 295/50 front and rear, 2/4 drop, Custom Sound Head unit, Alpine amp, Fosgate Punch P3, Kenwood 6x9 in the doors, Grant GT w/tilt, B&M MegaShifter...etc

04-19-2013, 01:11 AM	#191
blazins10 Registered User Join Date: Apr 2010 Location: vancouver wa Posts: 181	Re: 1960-1972 Lowering Block U bolts is it poss for 3 in blocks Posted via Mobile Device

04-25-2013, 11:49 PM	#192
68_chop_top Registered User Join Date: May 2008 Location: Granbury, TEXAS Posts: 250	Re: 1960-1972 Lowering Block U bolts send some 2" lowering u bolts for my 68 I had 2" lowering blocks and bolts but was too low sawed one in half and trimmed the bolts now I have a big block up front and the rear is too high going back to the 2" lowering blocks which I kept but no going back to the bolts I cut. PM left and paypal sent thanks __________________ Mine is chopped, has a clutch, and a big block.

05-04-2013, 09:03 AM	#193
68_chop_top Registered User Join Date: May 2008 Location: Granbury, TEXAS Posts: 250	Re: 1960-1972 Lowering Block U bolts Thank you Boris This is great, send money get great parts in the mail. Great quality stuff also. Installed them yesterday, very happy with the look. The top of the rear tires are just slightly tucked under the fenders. BEST TO YOU in all you do and thank you for doing this on the forum. __________________ Mine is chopped, has a clutch, and a big block.

05-15-2013, 02:51 PM	#195
Tshort1 Registered User Join Date: Feb 2012 Location: Pikeville, NC Posts: 144	Re: 1960-1972 Lowering Block U bolts Would you mind sending me 2" blocks and hardware. PayPal is on the way. Thanks.

05-15-2013, 02:56 PM	#196
Tshort1 Registered User Join Date: Feb 2012 Location: Pikeville, NC Posts: 144	Re: 1960-1972 Lowering Block U bolts Payment sent.

05-15-2013, 11:25 PM	#198
brownbag40 Registered User Join Date: Jun 2011 Location: Hughson Ca Posts: 85	Re: 1960-1972 Lowering Block U bolts How much for a set of 1" and hardware?

05-16-2013, 12:19 PM	#200
brownbag40 Registered User Join Date: Jun 2011 Location: Hughson Ca Posts: 85	Re: 1960-1972 Lowering Block U bolts Payment sent! Posted via Mobile Device



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.