KS Parting 67 GMC CST V6 - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cxune · 12-27-2013, 11:48 PM

$10 for the spring sounds fair, but just realized my $$ account is negative. Let me get some cash in and I'll get back with you. Thanks-

powell72 · 12-28-2013, 12:04 AM

Thanks for the pics Mike, do you still have the blue escutcheons that go behind them? I really only need the one window crank.

**Cash3481** · 12-28-2013, 12:12 AM

Quote:

Originally Posted by cxune

$10 for the spring sounds fair, but just realized my $$ account is negative. Let me get some cash in and I'll get back with you. Thanks-

No problem, get with me when your ready and I'll send you a pm with my paypal.

Quote:

Originally Posted by powell72

Thanks for the pics Mike, do you still have the blue escutcheons that go behind them? I really only need the one window crank.

I think I broke one and the other isn't around. If I run across it I'll send it for free to you. If you need that handle just cover the shipping and I'll send it with the next parts shipping I do. It will go in a small FRB for around 5 bucks and ship priority 2 day.

Mike

tsmith · 12-28-2013, 02:16 AM

Looking for back glass chrome if you have some pm me the shape of chrome and price shipped to 74857

**Cash3481** · 12-28-2013, 08:33 AM

Quote:

Originally Posted by tsmith

Looking for back glass chrome if you have some pm me the shape of chrome and price shipped to 74857

Quote:

Originally Posted by burb71

Is the stainless trim on the rear window still there and in good condition?
If so how much$

Guys,
Teeitup, Randy... can maybe help you out.
Mike

67carry-all · 12-28-2013, 04:51 PM

Thanks for the pic of the door panel strips. It's a little hard to tell in the pic - does it look like the exposed part of them will clean up ok? If so, I'll take them pending shipped price to95001. Also, any unbroken blue defroster vents? Thanks again.

trukman1 · 12-28-2013, 04:59 PM

Quote:

Originally Posted by trukman1

I'm interested in seat belts if they are available. Prices and pics?

I assume they are blue. I also would like to see the mounts as well.

Thank you.

Ah, any response here? Seat belts available?? Yes...No? Maybe?

**Cash3481** · 12-28-2013, 05:34 PM

Quote:

Originally Posted by 67carry-all

Thanks for the pic of the door panel strips. It's a little hard to tell in the pic - does it look like the exposed part of them will clean up ok? If so, I'll take them pending shipped price to95001. Also, any unbroken blue defroster vents? Thanks again.

I cleaned them a little but the light messes with your view. There is a small amount of surface rust but most cleans off with rubbing. Ill clean them all off for you and get a better contrast pic. Haven't found the vents. I'll look tonight again.
Mike

*low&slow* · 12-28-2013, 06:16 PM

Still got a 67-8 hood available? If so, what's the condition on them as far as rust goes? Any more pics?

Also, who do you go through for shipping?

**Cash3481** · 12-28-2013, 10:15 PM

Quote:

Originally Posted by low&slow

Still got a 67-8 hood available? If so, what's the condition on them as far as rust goes? Any more pics?

Also, who do you go through for shipping?

I do have a 67-8 hood but it's pretty rough. Several on Wichita CL though.
I ship through everyone depending on the day of the week, weight of the item and what size the object is. Fedex, USPS, UPS
All of these are close to me except greyhound and my wife works around the corner from there downtown. I go there and take her to lunch when I need to ship greyhound. Hoods are way to big to ship though.
Mike

**Cash3481** · 12-28-2013, 11:28 PM

Quote:

Originally Posted by trukman1

Ah, any response here? Seat belts available?? Yes...No? Maybe?

Truckman1:
Not sure why this hasn't posted as I've answered it twice but it didn't show. I apologize if it seems I passed you over... I am looking for these belts. I took them out when I removed the buddy buckets but can't find them. If I find them you can have them. I really didn't mean to pass you over. Sorry.
Mike

powell72 · 12-29-2013, 05:24 PM

Hey Mike, I know you're busy with all of us asking questions, I was wondering if you had checked on the armrests yet before I send payment.

trukman1 · 12-29-2013, 06:42 PM

Quote:

Originally Posted by Cash3481

Truckman1:
Not sure why this hasn't posted as I've answered it twice but it didn't show. I apologize if it seems I passed you over... I am looking for these belts. I took them out when I removed the buddy buckets but can't find them. If I find them you can have them. I really didn't mean to pass you over. Sorry.
Mike

Thanks Mike, your the best! Just let me know how much you want to ship to 45431. No hurry, I realize you have a lot going on. Thanks again, Gary

Pmarti69 · 12-29-2013, 07:29 PM

do you still have the cab along with the steering column and wheel?

**Cash3481** · 12-29-2013, 07:47 PM

Quote:

Originally Posted by powell72

Hey Mike, I know you're busy with all of us asking questions, I was wondering if you had checked on the armrests yet before I send payment.

Sorry no 67 armrests!

Quote:

Originally Posted by trukman1

Thanks Mike, your the best! Just let me know how much you want to ship to 45431. No hurry, I realize you have a lot going on. Thanks again, Gary

I do have a set of blue retractors but they are from a 72.

Quote:

Originally Posted by Pmarti69

do you still have the cab along with the steering column and wheel?

I have another 67 column but this one is gone
Mike

powell72 · 12-29-2013, 09:26 PM

Okay Mike, I'll send payment for the window crank then, thanks for looking!

**Cash3481** · 12-29-2013, 10:30 PM

Quote:

Originally Posted by powell72

Okay Mike, I'll send payment for the window crank then, thanks for looking!

It will go out tomorrow. That's like 7 boxes this weekend!
I wonder how Randy does this all the time? He's a machine!
Mike

trukman1 · 12-30-2013, 12:01 AM

I do have a set of blue retractors but they are from a 72.

Mike,

Those will work great. Let me know what you need from me.

Thanks, Gary

67carry-all · 01-04-2014, 04:49 PM

Hey, Mike, the thread's been quiet, just following up on the trim pieces and defroster vents - thanks, Ben

**Cash3481** · 01-04-2014, 08:14 PM

Quote:

Originally Posted by 67carry-all

Hey, Mike, the thread's been quiet, just following up on the trim pieces and defroster vents - thanks, Ben

Ben,
Here is a few pics trim pieces. I cleaned one up to see how they would turn out for you. and also of the vents that were supposed to have been in that truck. One is cracked but can see none the less.
Ill get you a shipping quote after the movies with the wife.

MIKE

67carry-all · 01-08-2014, 07:52 PM

Hi Mike - I'll pass on the vents - I'm looking for a pair of blue ones & thought the truck had a blue interior. Looks like the chrome cleaned up ok? - I'm interested in the pair of chrome strips pending shipped price to 95001. Thanks, Ben

**Cash3481** · 01-09-2014, 01:12 AM

Quote:

Originally Posted by 67carry-all

Hi Mike - I'll pass on the vents - I'm looking for a pair of blue ones & thought the truck had a blue interior. Looks like the chrome cleaned up ok? - I'm interested in the pair of chrome strips pending shipped price to 95001. Thanks, Ben

Ill take $25 for them if I didn't give you a price and it looks like $10.75 for shipping. They will clean up better that was about 3 minutes of cleaning.
Ill call it $35 shipped

Mike

Titus0 · 01-09-2014, 09:24 AM

Still have the front fenders? If so what shape are they in? Pics?

**Cash3481** · 01-09-2014, 10:45 AM

Quote:

Originally Posted by Titus0

Still have the front fenders? If so what shape are they in? Pics?

Already Sold Sorry!

**ScottH** · 01-09-2014, 12:47 PM

Mike, was wondering if the wiper knob was available, as well as the seat belts.

Any info is appreciated.

Thanks
Scott

12-27-2013, 11:48 PM	#176
cxune Registered User Join Date: Aug 2003 Location: Houston, Texas Posts: 68	Re: Parting 67 GMC CST V6 $10 for the spring sounds fair, but just realized my $$ account is negative. Let me get some cash in and I'll get back with you. Thanks-

12-28-2013, 12:04 AM	#177
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: Parting 67 GMC CST V6 Thanks for the pics Mike, do you still have the blue escutcheons that go behind them? I really only need the one window crank. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

12-28-2013, 02:16 AM	#179
tsmith Registered User Join Date: Feb 2012 Location: OKC, Ok Posts: 140	Re: Parting 67 GMC CST V6 Looking for back glass chrome if you have some pm me the shape of chrome and price shipped to 74857

12-28-2013, 04:51 PM	#181
67carry-all Registered User Join Date: Jul 2008 Location: Central Coast, CA Posts: 260	Re: Parting 67 GMC CST V6 Thanks for the pic of the door panel strips. It's a little hard to tell in the pic - does it look like the exposed part of them will clean up ok? If so, I'll take them pending shipped price to95001. Also, any unbroken blue defroster vents? Thanks again.

12-28-2013, 06:16 PM	#184
low&slow Account Suspended Join Date: Jan 2009 Location: Kuna, Idaho Posts: 1,046	Re: Parting 67 GMC CST V6 Still got a 67-8 hood available? If so, what's the condition on them as far as rust goes? Any more pics? Also, who do you go through for shipping?

12-29-2013, 05:24 PM	#187
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: Parting 67 GMC CST V6 Hey Mike, I know you're busy with all of us asking questions, I was wondering if you had checked on the armrests yet before I send payment. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

12-29-2013, 07:29 PM	#189
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: Parting 67 GMC CST V6 do you still have the cab along with the steering column and wheel? __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

12-29-2013, 09:26 PM	#191
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: Parting 67 GMC CST V6 Okay Mike, I'll send payment for the window crank then, thanks for looking! __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

12-30-2013, 12:01 AM	#193
trukman1 Registered User Join Date: Apr 2001 Location: Beavercreek, Ohio 45431 Posts: 737	Re: Parting 67 GMC CST V6 I do have a set of blue retractors but they are from a 72. Mike, Those will work great. Let me know what you need from me. Thanks, Gary __________________ 1967 K30 461/TH400/Np205/D60/14FF/BDS MTZ 375/75/16 on 16x10 Pro Comps

01-04-2014, 04:49 PM	#194
67carry-all Registered User Join Date: Jul 2008 Location: Central Coast, CA Posts: 260	Re: Parting 67 GMC CST V6 Hey, Mike, the thread's been quiet, just following up on the trim pieces and defroster vents - thanks, Ben

01-08-2014, 07:52 PM	#196
67carry-all Registered User Join Date: Jul 2008 Location: Central Coast, CA Posts: 260	Re: Parting 67 GMC CST V6 Hi Mike - I'll pass on the vents - I'm looking for a pair of blue ones & thought the truck had a blue interior. Looks like the chrome cleaned up ok? - I'm interested in the pair of chrome strips pending shipped price to 95001. Thanks, Ben

01-09-2014, 09:24 AM	#198
Titus0 Registered User Join Date: May 2010 Location: hope, arkansas Posts: 37	Re: Parting 67 GMC CST V6 Still have the front fenders? If so what shape are they in? Pics?

01-09-2014, 12:47 PM	#200
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting 67 GMC CST V6 Mike, was wondering if the wiper knob was available, as well as the seat belts. Any info is appreciated. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.