Jans 53 - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NorCalGal · 10-01-2019, 01:46 PM

Thanks everyone I’m slowly plugging away, been prepping all the small parts, inner fenders and such for paint.
Been thinking about using raptor liner on underside of fenders and the floor and walls of the cab. Anybody have any thoughts on this, I would love some feed back.

**8man** · 10-01-2019, 05:35 PM

I did that on the Cherokee and like it. Helps with noise and rock dents.

Matt_50 · 10-01-2019, 09:54 PM

I got some undercoating stuff from when I worked at the dodge house. Went on real good and it's pretty thick. Had to go back and add seat belt anchors. Was a pain to clean off a couple spots. But I bet it won't rust out.

**jweb** · 10-02-2019, 10:41 AM

I used the black Raptor liner on the inside of my fenders and bottom of cab. It's only been a little over a year but I'm really happy with it so far.

Also, a friend of mine has 2 cars that he wanted a matte finish on and sprayed the whole car with the tintable Raptor liner ( I would never do this). It's held up really well on both of them.

**youngrodder** · 10-02-2019, 12:48 PM

Quote:

Originally Posted by NorCalGal

Thanks everyone I’m slowly plugging away, been prepping all the small parts, inner fenders and such for paint.
Been thinking about using raptor liner on underside of fenders and the floor and walls of the cab. Anybody have any thoughts on this, I would love some feed back.

I just sprayed raptor on the bottom and top of the floors in my 53 suburban. The fenders and running boards are next. They recommend spraying at 40-60 PSI. It you dial back to a lower pressure you will get a little rougher finish than spraying at 60 psi or above. I like how it sealed everything..

Looking good...

Marc

NorCalGal · 10-02-2019, 01:54 PM

Thanks for the feed back guy’s, any idea how much I should order? I’m thinking I will do 2 coats under fenders, rear wall, kick panels, floor board, under the dash and under running boards.
Also, can I spray it over SPI epoxy and what grit should I use before I spray?

**youngrodder** · 10-03-2019, 01:11 PM

Quote:

Originally Posted by NorCalGal

Thanks for the feed back guy’s, any idea how much I should order? I’m thinking I will do 2 coats under fenders, rear wall, kick panels, floor board, under the dash and under running boards.
Also, can I spray it over SPI epoxy and what grit should I use before I spray?

I bought 2 kits (4) bottles per kit. I used (7) bottles for everything I coated (see my build tread for an idea). I will go back and buy (4) more bottles to do the backsides of my fenders and bottom side of my running boards.

NorCalGal · 10-12-2019, 07:25 PM

Finally got to do something different than sand and prime today. Shot the inside of my cab and bottom side of inner fenders with Raptor liner. The worst part of the job is getting everything taped off, shooting it is super easy. I’m extremely happy with this product. I have used five bottles so far and still have the under side of the fenders to do.

**oldman3** · 10-13-2019, 12:09 AM

Looks great...Jim

**mongocanfly** · 10-13-2019, 12:45 AM

raptor looks good...ive got some raptor that I'm gonna use under my fenders...I used lizardskin in nd under cab and have linerextreme for my bed...

**8man** · 10-13-2019, 11:29 AM

Looks great. I still like the 5 rear cab supports.

NorCalGal · 10-26-2019, 09:45 PM

Plugging along in the undercoating world. Last of the fenders done today, still have a lots of little painting projects to do on some brackets and core support. Thankfully the weather here is cooperating so far.

MIKESAD50 · 10-26-2019, 10:00 PM

Jans53,
Looking good.

**oldman3** · 10-26-2019, 11:25 PM

nice job...Jim

**8man** · 10-27-2019, 09:12 AM

That looks good.

**youngrodder** · 10-29-2019, 09:15 AM

Looks great...….Its a nice feeling having everything sealed up.

Marc

NorCalGal · 10-29-2019, 02:28 PM

Thanks everyone. I’m hoping to get enough done this year so that maybe I can put some paint on it next summer. The hardest part has been trying to pick a color.

**8man** · 10-29-2019, 03:38 PM

Paint? Then final assembly and driving? I can see that sometime in my future, I think.

Matt_50 · 10-30-2019, 11:15 PM

Wow that looks professional!!

NorCalGal · 11-08-2019, 12:14 PM

Taking advantage of the 70-80 degree weather here in cali to get some parts painted and ready for spring assembly.....maybe?

**8man** · 11-08-2019, 01:59 PM

Looking good. You are going to be cruising come spring time.

NorCalGal · 11-08-2019, 02:40 PM

Robert, since everything takes me 3 times longer than normal I’m not counting on it.

Matt_50 · 11-08-2019, 04:52 PM

Is that your living room? I think my wife would have a fit. Lol

**8man** · 11-08-2019, 04:56 PM

Well you got that going for you. I'm still at the three times longer, do it wrong anyway, and then have to do it all over again!

NorCalGal · 11-08-2019, 05:36 PM

Quote:

Originally Posted by Matt_50

Is that your living room? I think my wife would have a fit. Lol

Matt refer to post #169
I’m the wife, and I say it’s ok it can stay as long as it needs to!

Although, it is motivation to get this thing done.

10-01-2019, 01:46 PM	#176
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 Thanks everyone I’m slowly plugging away, been prepping all the small parts, inner fenders and such for paint. Been thinking about using raptor liner on underside of fenders and the floor and walls of the cab. Anybody have any thoughts on this, I would love some feed back. __________________ Jan's 53

10-01-2019, 05:35 PM	#177
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,380	Re: Jans 53 I did that on the Cherokee and like it. Helps with noise and rock dents. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

10-01-2019, 09:54 PM	#178
Matt_50 Registered User Join Date: Jul 2017 Location: Joshua, Texas. Posts: 1,303	Re: Jans 53 I got some undercoating stuff from when I worked at the dodge house. Went on real good and it's pretty thick. Had to go back and add seat belt anchors. Was a pain to clean off a couple spots. But I bet it won't rust out. __________________ 1950 Build

10-02-2019, 10:41 AM	#179
jweb Senior Member Join Date: Apr 2010 Location: Oregon Posts: 1,208	Re: Jans 53 I used the black Raptor liner on the inside of my fenders and bottom of cab. It's only been a little over a year but I'm really happy with it so far. Also, a friend of mine has 2 cars that he wanted a matte finish on and sprayed the whole car with the tintable Raptor liner ( I would never do this). It's held up really well on both of them. __________________ 1951 Truck, LS1/4L60 1964 Suburban, current project 2014 Silverado daily driver 1953 Westerner "canned ham" trailer, rebuilt 1974 Prowler trailer, rebuilt

10-02-2019, 01:54 PM	#181
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 Thanks for the feed back guy’s, any idea how much I should order? I’m thinking I will do 2 coats under fenders, rear wall, kick panels, floor board, under the dash and under running boards. Also, can I spray it over SPI epoxy and what grit should I use before I spray? __________________ Jan's 53

10-12-2019, 07:25 PM	#183
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 Finally got to do something different than sand and prime today. Shot the inside of my cab and bottom side of inner fenders with Raptor liner. The worst part of the job is getting everything taped off, shooting it is super easy. I’m extremely happy with this product. I have used five bottles so far and still have the under side of the fenders to do. Attached Images __________________ Jan's 53

10-13-2019, 12:09 AM	#184
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jans 53 Looks great...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

10-13-2019, 12:45 AM	#185
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,673	Re: Jans 53 raptor looks good...ive got some raptor that I'm gonna use under my fenders...I used lizardskin in nd under cab and have linerextreme for my bed... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

10-13-2019, 11:29 AM	#186
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,380	Re: Jans 53 Looks great. I still like the 5 rear cab supports. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

10-26-2019, 09:45 PM	#187
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 Plugging along in the undercoating world. Last of the fenders done today, still have a lots of little painting projects to do on some brackets and core support. Thankfully the weather here is cooperating so far. Attached Images __________________ Jan's 53

10-26-2019, 10:00 PM	#188
MIKESAD50 Registered User Join Date: Feb 2014 Location: Sunnyvale, CA Posts: 605	Re: Jans 53 Jans53, Looking good. __________________ 1950 3100 5 window

10-26-2019, 11:25 PM	#189
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jans 53 nice job...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

10-27-2019, 09:12 AM	#190
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,380	Re: Jans 53 That looks good. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

10-29-2019, 09:15 AM	#191
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,774	Re: Jans 53 Looks great...….Its a nice feeling having everything sealed up. Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

10-29-2019, 02:28 PM	#192
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 Thanks everyone. I’m hoping to get enough done this year so that maybe I can put some paint on it next summer. The hardest part has been trying to pick a color. __________________ Jan's 53



Register or Log In To remove these advertisements.

10-29-2019, 03:38 PM	#193
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,380	Re: Jans 53 Paint? Then final assembly and driving? I can see that sometime in my future, I think. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

10-30-2019, 11:15 PM	#194
Matt_50 Registered User Join Date: Jul 2017 Location: Joshua, Texas. Posts: 1,303	Re: Jans 53 Wow that looks professional!! __________________ 1950 Build

11-08-2019, 12:14 PM	#195
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 Taking advantage of the 70-80 degree weather here in cali to get some parts painted and ready for spring assembly.....maybe? Attached Images __________________ Jan's 53

11-08-2019, 01:59 PM	#196
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,380	Re: Jans 53 Looking good. You are going to be cruising come spring time. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

11-08-2019, 02:40 PM	#197
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Jans 53 Robert, since everything takes me 3 times longer than normal I’m not counting on it. __________________ Jan's 53

11-08-2019, 04:52 PM	#198
Matt_50 Registered User Join Date: Jul 2017 Location: Joshua, Texas. Posts: 1,303	Re: Jans 53 Is that your living room? I think my wife would have a fit. Lol __________________ 1950 Build

11-08-2019, 04:56 PM	#199
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,380	Re: Jans 53 Well you got that going for you. I'm still at the three times longer, do it wrong anyway, and then have to do it all over again! __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.