Refining "Sierra" - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 03-08-2016, 11:23 AM

Quote:

Originally Posted by 68Timber

Ken, congrats on making the show. I saw the truck popping up on several instagram feeds last weekend and wondered how the final push went. Truck looks fantastic.

Quote:

Originally Posted by JWall

Looks great! Super clean & well done!

Quote:

Originally Posted by Chaplain

Thumbs up...

Quote:

Originally Posted by Palf70Step

Truck looks great ken!

Quote:

Originally Posted by mcbassin

Excellent job on this truck Ken! Looks great!

Thanks for the kind words. Your positive input was very motivational.

Quote:

Originally Posted by Greenlee

Nice work!

Removing the wiring from the top of the firewall looks real clean.

It was a chore to reroute it with the stock wiring. I would love to have had time to build a custom harness.

Quote:

Originally Posted by original-71

I knew I had faith in you brother to make it by LST, truck turned out great it has your touch for sure...

Thanks brotha. I appreciate you and the Relaxed family checking in and motivating me.

**N2TRUX** · 03-08-2016, 11:32 AM

I still have a few things to wrap up before this one hits the market. We will install more sound deadner, and the new carpet kit. Now we can spend some time tuning the stereo, and finish up the a/c duct work as well. I have a fresh dash pad to dye and install as well.

Under the hood I want to double check all of the nuts and bolts now that its had some road time. Even though the cooling system was flushed when the new radiator was installed, I'm still getting brown water in the tank. I plan to run another flush kit through it, and cycle the system till clean.
I will replace all of the O-rings and recharge the a/c system with a fresh round of 134. That should make it ready for the next owner to enjoy cruising in comfort with no worries about reliability..

**lolife99** · 03-08-2016, 12:48 PM

Next owner???
Why are you selling it?

BB72CHEVKT · 03-08-2016, 06:35 PM

It turned out great!

**N2TRUX** · 03-08-2016, 09:41 PM

Quote:

Originally Posted by lolife99

Next owner???
Why are you selling it?

Thats been my intentions from the beginning. To satisfy my OCD I decided to buy, build, and sell a select few trucks that I have always wanted to own.

bigblock73 · 03-09-2016, 10:20 PM

Quote:

Originally Posted by bigblock73

Do you have finished pics of the rear storage area?

Still wondering about the rear storage/speaker

**N2TRUX** · 03-14-2016, 05:31 PM

Quote:

Originally Posted by bigblock73

Still wondering about the rear storage/speaker

My apologies Jeff. I had hoped to get some better quality pics than what I have already. Unfortunately I got sick last week, and didnt get to spend any time in my shop this weekend.

I had planned to pull the seat and box to install the carpet kit. Since that didnt happen, heres what I have now. I promise to get better ones to soon.

Low Elco · 03-16-2016, 01:01 PM

Back panel looks nice!

Zach079xxx · 03-16-2016, 08:07 PM

HOW did you get the wires hidden so well?! I wish mine looked like that.. can you snap some more detail pictures? That's always what I've wanted to do but IDK where to start.

Quote:

Originally Posted by N2TRUX

The Sierra was very well received at the LST show. I spent the weekend answering questions and enjoying compliments from some very high profile builders. Chris and I were elated that we had made it with no issues on the road. We enjoyed the show and I took a LOT of pics of all the cool classic trucks at the show. Those can be found on my Instagram feed, but heres a few from the show of the Sierra. Enjoy....

**N2TRUX** · 03-17-2016, 09:59 AM

Quote:

Originally Posted by Zach079xxx

HOW did you get the wires hidden so well?! I wish mine looked like that.. can you snap some more detail pictures? That's always what I've wanted to do but IDK where to start.

Unfortunately its almost impossible to photograph what we did because its wrapped in tape or loom. We pulled each set of wires and separated them from the factory bundles. Then we cleaned them thoroughly and layed them out to determine the best route.

I tried to avoid splices, but had to in some cases to improve the flow. Once we had everything rerouted we wrapped each run separately with fresh tape. Its best done with two people so one can hold it tight while the other wraps the wires.

It was tedious work, but well worth the effort.

**N2TRUX** · 03-17-2016, 10:11 AM

Quote:

Originally Posted by Low Elco

Back panel looks nice!

Thanks. When I install the new carpet kit, I will line inside the storage with carpet as well. That should give it a more finished look.

Zach079xxx · 03-17-2016, 11:53 AM

That looks killer.. I will attempt this the next time working on my truck

Quote:

Originally Posted by N2TRUX

Unfortunately its almost impossible to photograph what we did because its wrapped in tape or loom. We pulled each set of wires and separated them from the factory bundles. Then we cleaned them thoroughly and layed them out to determine the best route.

I tried to avoid splices, but had to in some cases to improve the flow. Once we had everything rerouted we wrapped each run separately with fresh tape. Its best done with two people so one can hold it tight while the other wraps the wires.

It was tedious work, but well worth the effort.

**N2TRUX** · 04-19-2016, 12:17 PM

Heres one last update before I close the book of "Refining Sierra". We spent the last few weekends finishing up minor details that had been put aside due to time constraints.

We did a complete clean up and analyzed all of our work to ensure everything was still working as intended. One last pass under the dash and we installed the pieces of A/C duct that got left behind in our rush. Everything looked good under there. We followed up with a final tune on the sound system called it done.

To double check our work, Chris and i went to a ST Judes fund raiser with my Relaxed Atmosphere brothers, and enjoyed a great day in the sun.

BigMike608 · 04-19-2016, 01:49 PM

turned out great buddy!

**N2TRUX** · 04-20-2016, 09:58 AM

Time to wrap up this chapter "Refining Sierra" . Last week Chris and I did one final pass over the checklist. I had replaced all of the "O" rings in the A/C system, and had it recharged. It was updated with 134A and it works excellent.
Everything worked as intended, so it was time to say goodbye. Saturday morning I got her out for one last photo shoot, then loaded her on a trailer to head to her new home. I'm going to miss this pretty lady.

ultrahd4me · 04-20-2016, 10:17 AM

Well done sir. The new owner is getting a killer truck.

aggie91 · 04-20-2016, 01:29 PM

I agree, the new owner should be very happy with this nice truck!

dropd80s · 04-20-2016, 02:32 PM

Beautiful work and congratulations on the sale. I hope it was profitable! Are we on to the next one?

SCOTI · 04-20-2016, 02:57 PM

Ok..... Nobody has asked.....

Who is this new mystery owner?

SHILOW · 04-21-2016, 06:14 AM

I hope you were able to get your truck to high ground. I've lived in Cypress over 35 years and it has never been this bad. Looks like you sold "Project Sierra" just in time.

**N2TRUX** · 04-22-2016, 10:28 AM

Quote:

Originally Posted by ultrahd4me

Well done sir. The new owner is getting a killer truck.

Quote:

Originally Posted by aggie91

I agree, the new owner should be very happy with this nice truck!

Thanks for the kind words.

Quote:

Originally Posted by dropd80s

Beautiful work and congratulations on the sale. I hope it was profitable!

This one was a learning experience for my nephew, so the rewards were huge. Profit? not so much.

Quote:

Originally Posted by SCOTI

Ok..... Nobody has asked.....Who is this new mystery owner?

Scoti I'm not sure if Randy the new owner has an account here. I did send him a link to this thread, so maybe he will speak out.

Quote:

Originally Posted by SHILOW

I hope you were able to get your truck to high ground. I've lived in Cypress over 35 years and it has never been this bad. Looks like you sold "Project Sierra" just in time.

SHILOW it was pretty crazy, but we stayed high and dry. It was the worst I had seen in my 15 years here. I didnt know I had a squarebody buddy out here. We need to get acquainted.

Quote:

Originally Posted by dropd80s

Are we on to the next one?

I just bought a 2016 Sierra to replace my 2013 Sierra. I need to get the 13 cleaned up and put on the market. I'm looking for a 99-09 gen truck for my nephew, and trying to buy a new truck for my service manager.

Beyond that I plan to back to my 77 which has the interior gutted. So I really dont "need" another project right now. I will probably wait till I get caught up before moving on to the next one.

At least that's what I tell my wife...

Low Elco · 04-22-2016, 01:53 PM

Glad to hear you're above water. I've been wondering about you.

**N2TRUX** · 05-01-2016, 02:13 PM

Here we go again! I had plans to focus on my 77 Cheyenne project, but sometimes things change unintentionally. For more details follow the link- 85 GMC Sierra "Scarlett"

RonnieTheBull · 05-02-2016, 09:15 PM

Great thread, look forward to the next!

SKT · 06-19-2016, 08:55 PM

.
.

Stunning job w/ this one - understand your time constraint, but your attention to detail is second to none.

Bet the new owner is enjoying this one!

.
.

03-08-2016, 11:32 AM	#177
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Refining "Sierra" I still have a few things to wrap up before this one hits the market. We will install more sound deadner, and the new carpet kit. Now we can spend some time tuning the stereo, and finish up the a/c duct work as well. I have a fresh dash pad to dye and install as well. Under the hood I want to double check all of the nuts and bolts now that its had some road time. Even though the cooling system was flushed when the new radiator was installed, I'm still getting brown water in the tank. I plan to run another flush kit through it, and cycle the system till clean. I will replace all of the O-rings and recharge the a/c system with a fresh round of 134. That should make it ready for the next owner to enjoy cruising in comfort with no worries about reliability.. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

03-08-2016, 12:48 PM	#178
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Refining "Sierra" Next owner??? Why are you selling it? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-08-2016, 06:35 PM	#179
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Refining "Sierra" It turned out great! __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

03-16-2016, 01:01 PM	#183
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Refining "Sierra" Back panel looks nice! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

04-19-2016, 12:17 PM	#188
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Refining "Sierra" Heres one last update before I close the book of "Refining Sierra". We spent the last few weekends finishing up minor details that had been put aside due to time constraints. We did a complete clean up and analyzed all of our work to ensure everything was still working as intended. One last pass under the dash and we installed the pieces of A/C duct that got left behind in our rush. Everything looked good under there. We followed up with a final tune on the sound system called it done. To double check our work, Chris and i went to a ST Judes fund raiser with my Relaxed Atmosphere brothers, and enjoyed a great day in the sun. Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 04-19-2016 at 12:33 PM.

04-19-2016, 01:49 PM	#189
BigMike608 Registered User Join Date: Oct 2010 Location: Dallas, TX Posts: 432	Re: Refining "Sierra" turned out great buddy! __________________ 1977 SWB C10 - "Woodson": 5.3 Vortec LS Swap, 4L60e Trans, 4.5/5 drop

04-20-2016, 09:58 AM	#190
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Refining "Sierra" Time to wrap up this chapter "Refining Sierra" . Last week Chris and I did one final pass over the checklist. I had replaced all of the "O" rings in the A/C system, and had it recharged. It was updated with 134A and it works excellent. Everything worked as intended, so it was time to say goodbye. Saturday morning I got her out for one last photo shoot, then loaded her on a trailer to head to her new home. I'm going to miss this pretty lady. Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

04-20-2016, 10:17 AM	#191
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: Refining "Sierra" Well done sir. The new owner is getting a killer truck. __________________ Follow me on Instagram: @midtennc10 Youtube channel: Midtennc10

04-20-2016, 01:29 PM	#192
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Refining "Sierra" I agree, the new owner should be very happy with this nice truck! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

04-20-2016, 02:32 PM	#193
dropd80s Registered User Join Date: Mar 2003 Location: wichita falls tx Posts: 429	Re: Refining "Sierra" Beautiful work and congratulations on the sale. I hope it was profitable! Are we on to the next one? __________________ "I'm Dirk Diggler enough to own and operate a vehicle of this caliber" -veinbar Dropped and LS Swapped SWB 87 Build Thread

04-20-2016, 02:57 PM	#194
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: Refining "Sierra" Ok..... Nobody has asked..... Who is this new mystery owner? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-21-2016, 06:14 AM	#195
SHILOW Registered User Join Date: Feb 2013 Location: Cypress, Texas Posts: 17	Re: Refining "Sierra" I hope you were able to get your truck to high ground. I've lived in Cypress over 35 years and it has never been this bad. Looks like you sold "Project Sierra" just in time.

04-22-2016, 01:53 PM	#197
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Refining "Sierra" Glad to hear you're above water. I've been wondering about you. __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

05-01-2016, 02:13 PM	#198
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Refining "Sierra" Here we go again! I had plans to focus on my 77 Cheyenne project, but sometimes things change unintentionally. For more details follow the link- 85 GMC Sierra "Scarlett" Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 05-03-2016 at 09:25 AM.

05-02-2016, 09:15 PM	#199
RonnieTheBull Registered User Join Date: Feb 2009 Location: MARYLAND Posts: 84	Re: Refining "Sierra" Great thread, look forward to the next!



Register or Log In To remove these advertisements.

06-19-2016, 08:55 PM	#200
SKT Registered User Join Date: Oct 2014 Location: Location: Posts: 8,444	Re: Refining "Sierra" . . Stunning job w/ this one - understand your time constraint, but your attention to detail is second to none. Bet the new owner is enjoying this one! . . __________________ ... Click here to see thousands of 'Abandoned & Neglected' Chevy trucks rotting away... ...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.