Tootsie build for my mother with cancer - Page 88 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*truckmanloco* · 03-13-2013, 10:10 AM

Center section looks sweet brother.

66redw/white · 03-13-2013, 12:22 PM

man this truck is just incredibly awesome.

**superflysteiny** · 03-13-2013, 01:11 PM

I have gone over board on this truck. Its hard to believe that this frame will be back together by the end of the month and ready for the body. We will see Mario Travis and I are pushing like crazy. Should have all the parts back by middle of next week then I will put it together

Rusbuilt · 03-13-2013, 04:29 PM

I personally think its amazing! Lol I can't wait to see it driving down the highway!!
Posted via Mobile Device

**superflysteiny** · 03-13-2013, 06:48 PM

Thanks Rus I am proud of this truck many people on the board have supported us and reached out. That to me is what its all about. I figure might as well go all out because I am taking a brake from building for a while. My wife has put here foot down. I need to be at home more and she is right. I will have delmo build the crewcabs body and I will do the frame. But that build will be slow and steady. If I have a little extra cash I will throw it at the truck. If I dont it will sit

ddubbs · 03-13-2013, 07:06 PM

Truck is turning out killer. There going to have to give you more room for 2 toty tags.
Posted via Mobile Device

American Pastimes · 03-14-2013, 06:55 PM

Cant wait to see it in front of the shop,

shawno72 · 03-14-2013, 07:09 PM

I bet mom is proud

jlaird · 03-14-2013, 09:01 PM

What is the little blue thing behind the tank? Is it a vent?
Posted via Mobile Device

Dinos63 · 03-15-2013, 12:41 AM

top notch stuff always, is the truck going to be a delmar?

**superflysteiny** · 03-15-2013, 10:41 AM

Quote:

Originally Posted by ddubbs

Truck is turning out killer. There going to have to give you more room for 2 toty tags.
Posted via Mobile Device

That would be cool

Quote:

Originally Posted by American Pastimes

Cant wait to see it in front of the shop,

I can't wait ether

Quote:

Originally Posted by shawno72

I bet mom is proud

She is and she cant wait to see it finished

Quote:

Originally Posted by jlaird

What is the little blue thing behind the tank? Is it a vent?
Posted via Mobile Device

It's were the return line connects

Quote:

Originally Posted by Dinos63

top notch stuff always, is the truck going to be a delmar?

it will be the finished rolling chassis no body. It should be insane with all the bright work
Posted via Mobile Device

**superflysteiny** · 03-16-2013, 10:50 AM

Ok guys I have the motor trans and rear end preped and ready for paint. This is the one off horn button I has made for the truck. It's not polished yet. The one off exhaust ports are done too. They will be polished and the ball milled line will be striped to match the trim. I will be making one off billet a-arms for the truck. I will be starting a company called tootsies speed shop and I will be selling the a arms and a lot of the parts I am having made for the truck like the exhaust ports. So I will keep you guys posted
Posted via Mobile Device

**superflysteiny** · 03-16-2013, 10:53 AM

Posted via Mobile Device

**superflysteiny** · 03-16-2013, 10:54 AM

Oh an the a arms will be made out of billet
Posted via Mobile Device

jbclassix · 03-16-2013, 11:22 AM

Man! Over the top doesn't do it justice!
Posted via Mobile Device

Bennett68C10 · 03-16-2013, 11:41 AM

Awesome Eric, i'll be interested in the exhaust ports

**superflysteiny** · 03-16-2013, 11:46 AM

Ok I will get an account set up through the board and start making these parts for guys that want them. I cam make different patterns on the exhaust exits if you want. Totally up to you guys.
Posted via Mobile Device

**superflysteiny** · 03-16-2013, 11:49 AM

I may also be offering the inner fenders in fiberglass for sale that we made for these trucks
Posted via Mobile Device

Bhelton · 03-16-2013, 11:52 AM

Eric those parts look great as well as the build! Keep up the great work!!
Thanks, Ben
Posted via Mobile Device

ddubbs · 03-16-2013, 12:15 PM

Right on Eric. Congrats on the new business venture. Billet parts look sweet.
Can't wait to see the a-arms.
Posted via Mobile Device

**superflysteiny** · 03-16-2013, 08:17 PM

Thanks guys should be cool
Posted via Mobile Device

Bennett68C10 · 03-16-2013, 11:17 PM

Have you thought about making the modified rear wheel wells for the rear dropmembers and raised bed floors. This would be good for us guys with limited metal working skills.
Posted via Mobile Device

Lolyin58 · 03-17-2013, 10:19 AM

Eric truck is looking good Bro. Are you going to Del Mar at all??

**superflysteiny** · 03-18-2013, 12:07 PM

Quote:

Originally Posted by Bennett--G4L

Have you thought about making the modified rear wheel wells for the rear dropmembers and raised bed floors. This would be good for us guys with limited metal working skills.
Posted via Mobile Device

great idea mane I will do that too

Quote:

Originally Posted by Lolyin58

Eric truck is looking good Bro. Are you going to Del Mar at all??

I will be there with the rolling chassis
Posted via Mobile Device

**superflysteiny** · 03-18-2013, 12:10 PM

Huge thanks to Mario and Bill for shooting the motor and trans orange last night. Frame is blasted and ready for powder. I will have it back tomorrow night. If I get the chrome and polish back by the end of the week I am money.

Posted via Mobile Device

03-13-2013, 10:10 AM	#2176
truckmanloco Account Suspended Join Date: Nov 2007 Location: San Diego ca Posts: 717	Re: Tootsie build for my mother with cancer Center section looks sweet brother.

03-13-2013, 12:22 PM	#2177
66redw/white made in america Join Date: May 2010 Location: baton rouge la Posts: 653	Re: Tootsie build for my mother with cancer man this truck is just incredibly awesome. __________________ 2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold

03-13-2013, 01:11 PM	#2178
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer I have gone over board on this truck. Its hard to believe that this frame will be back together by the end of the month and ready for the body. We will see Mario Travis and I are pushing like crazy. Should have all the parts back by middle of next week then I will put it together __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-13-2013, 04:29 PM	#2179
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Tootsie build for my mother with cancer I personally think its amazing! Lol I can't wait to see it driving down the highway!! Posted via Mobile Device __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-13-2013, 06:48 PM	#2180
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Thanks Rus I am proud of this truck many people on the board have supported us and reached out. That to me is what its all about. I figure might as well go all out because I am taking a brake from building for a while. My wife has put here foot down. I need to be at home more and she is right. I will have delmo build the crewcabs body and I will do the frame. But that build will be slow and steady. If I have a little extra cash I will throw it at the truck. If I dont it will sit __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-13-2013, 07:06 PM	#2181
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Tootsie build for my mother with cancer Truck is turning out killer. There going to have to give you more room for 2 toty tags. Posted via Mobile Device __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

03-14-2013, 06:55 PM	#2182
American Pastimes Registered User Join Date: Dec 2011 Location: Carmichael Posts: 226	Re: Tootsie build for my mother with cancer Cant wait to see it in front of the shop,

03-14-2013, 07:09 PM	#2183
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Tootsie build for my mother with cancer I bet mom is proud __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-14-2013, 09:01 PM	#2184
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: Tootsie build for my mother with cancer What is the little blue thing behind the tank? Is it a vent? Posted via Mobile Device Attached Images

03-15-2013, 12:41 AM	#2185
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Tootsie build for my mother with cancer top notch stuff always, is the truck going to be a delmar? __________________ CHEVY ONLY... Nothin Else !

03-16-2013, 10:50 AM	#2187
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Ok guys I have the motor trans and rear end preped and ready for paint. This is the one off horn button I has made for the truck. It's not polished yet. The one off exhaust ports are done too. They will be polished and the ball milled line will be striped to match the trim. I will be making one off billet a-arms for the truck. I will be starting a company called tootsies speed shop and I will be selling the a arms and a lot of the parts I am having made for the truck like the exhaust ports. So I will keep you guys posted Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-16-2013, 10:53 AM	#2188
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-16-2013, 10:54 AM	#2189
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Oh an the a arms will be made out of billet Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-16-2013, 11:22 AM	#2190
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Tootsie build for my mother with cancer Man! Over the top doesn't do it justice! Posted via Mobile Device __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

03-16-2013, 11:41 AM	#2191
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Tootsie build for my mother with cancer Awesome Eric, i'll be interested in the exhaust ports __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10



Register or Log In To remove these advertisements.

03-16-2013, 11:46 AM	#2192
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Ok I will get an account set up through the board and start making these parts for guys that want them. I cam make different patterns on the exhaust exits if you want. Totally up to you guys. Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-16-2013, 11:49 AM	#2193
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer I may also be offering the inner fenders in fiberglass for sale that we made for these trucks Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-16-2013, 11:52 AM	#2194
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Re: Tootsie build for my mother with cancer Eric those parts look great as well as the build! Keep up the great work!! Thanks, Ben Posted via Mobile Device

03-16-2013, 12:15 PM	#2195
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Tootsie build for my mother with cancer Right on Eric. Congrats on the new business venture. Billet parts look sweet. Can't wait to see the a-arms. Posted via Mobile Device __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

03-16-2013, 08:17 PM	#2196
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Thanks guys should be cool Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-16-2013, 11:17 PM	#2197
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Tootsie build for my mother with cancer Have you thought about making the modified rear wheel wells for the rear dropmembers and raised bed floors. This would be good for us guys with limited metal working skills. Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

03-17-2013, 10:19 AM	#2198
Lolyin58 Registered User Join Date: Mar 2008 Location: Calgary,Alberta,Canada Posts: 372	Re: Tootsie build for my mother with cancer Eric truck is looking good Bro. Are you going to Del Mar at all?? __________________ Dino's 3rd annual Pre-ShowGit Down http://67-72chevytrucks.com/vboard/s...12#post5639812

03-18-2013, 12:10 PM	#2200
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Huge thanks to Mario and Bill for shooting the motor and trans orange last night. Frame is blasted and ready for powder. I will have it back tomorrow night. If I get the chrome and polish back by the end of the week I am money. Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.