Meet Project Red, White, and Blue

[no moa]

Thanks, bed need more work, I pulled it apart today, the wheel wells need patches, and the floor needs the 2 rear cross sills are bad.i hope to find some replacement s soon.
Posted via Mobile Device

[Boyd B]

Originally Posted by no moa

Thank you, can't cry over cut frames. I'm thinking if i love this truck when its done, i'll find a southern short frame and redo it in 10 years or so, or about the time its done! lol

I saw you over on my thread, Thanks for the support! I breezed through your pics, I didn't see the cut job (I could have missed it). My thought on the frame is if it is done right, not to worry, it will be stronger than factory.

You have got a great thing going though,, good luck!

[no moa]

Thanks, its a long road ahead! I think my frame work was overkill, and there should be a pic somewhere of my frame where is was cut and rewelded. They did it right, but with me pushing 400hp in the BB 454. I don't want the frame coming apart. lol

[Boyd B]

I am going full throttle on mine, we have a car run Labor day weekend in Billings MT called "Burning the point", the name comes from what the '70's kids called cruising around town. There is a Car show and swap meet. I have a lot to do in a short few months (if the bank account can take the hits ), so wish me luck!

[no moa]

Wow that's a short time frame, well I hope like me your bank account doesn't go broke! Lol
Posted via Mobile Device

[Boyd B]

Lucky for me I don't have too much rust and no body work to speak of. Already have the donor engine and trans, just need 3.08 diff, disc brakes, and misc. a/c parts. Oh yeah and paint, Maybe Hugger Orange or Kelly Green. The truck was white w/ red interior.

[no moa]

Well, after a week of trying to get prices and replys about brakes, and no replys and no prices from vendors (i know everyones busy), i'm going to go with a set of D52 front wilwood calipers and pads from Ebay, and use all new Drum set up in the rear (napa), at least that will give me my ebrake and won't set me back $800. I can upgrade in the future, but for now i need to get moving on this project.

[chevy88]

Hopefully it won't be off too long. Nice truck too start off with.

[no moa]

Looky what came today. Now i need to decide on Brake lines and fuel lines.

[RenoKeene]

I checked my bed rails out and they are junk....I'll keep an eye out for ya though.

[RCbowtie69]

Very nice gas tank,every part is progress, so keep the picture coming & keep on truckin'

[no moa]

Thanks brad for that eye's out visual, you really should get that looked at! Lol

And thank you rcbowtie69, I was hoping to mount it up today to but gotta finish wiring up a truck for the fire dept, so it will be another week.
Posted via Mobile Device

[Benny00z71]

Just read through the whole thread. Nice work!!! It amazes me what can be done with a rusty NE truck. Love that seat too.

[no moa]

Thank you, it's come to a halt at the moment, hoping to get brake and fuel lines done in the very near future.

[no moa]

my latest purchase.

Thanks to Tim (slomotion) for this one. All refurbed with new parts, i will have to find a good printed circuit, and It has the choke hole, and its not right for my 72, but its so pretty i don't care!!

This makes #5 in the tach dash dept. Not sure why i have that many.

[J kippin]

wow one helluva job Keep up the good work.I missed the part about the engine?? Why are you switching to the 454

John

[no moa]

Thanks.
My dad has a 454 that is built. I'm going to use instead of building the 402.
Posted via Mobile Device

[northern 85]

I have a brand new bezel for your 72 if you want to trade. Slomotion is a great guy i met him in at a swap meet.

[no moa]

Originally Posted by northern 85

I have a brand new bezel for your 72 if you want to trade. Slomotion is a great guy i met him in at a swap meet.

Sent you a PM

[67barnfind]

That looks like a pretty good score you have there. BBC, swb pretty solid looking. Did they shorten the frame or swap cab/box onto a short frame? I have some killer connections in the midwest and I still have lots of parts out there. Just let me know what you need and I'll see what I can do to help... Of course, I still haven't got mine pulled out of the weeds yet... Happy building !!

[no moa]

Originally Posted by 67barnfind

That looks like a pretty good score you have there. BBC, swb pretty solid looking. Did they shorten the frame or swap cab/box onto a short frame? I have some killer connections in the midwest and I still have lots of parts out there. Just let me know what you need and I'll see what I can do to help... Of course, I still haven't got mine pulled out of the weeds yet... Happy building !!

Thanks for the parts offer, might hit you up on that.

The PO claimed it was a true short bed BB truck, i checked it out (in the snow) and it showed no signs of frame being cut. but the SPID code for SWB was something i missed. one of the guess on here saw it and said it was a longbed BB truck.
When i pulled the bed off, i found the welded seem. He claims he knew nothing about it, but i'm not sure i believe him.
Get yours outta the weeds and get workin! lol

[no moa]

Thought i'd toss in an update. Nothing to update. I'm disgusted with my progress, I am stuck at a cross road with $ and time, between work, lazyness, kids, bills, and lack of knowledge i'm ready to toss in the towel on this one.
I'm stuck and brake and fuel lines, no clue how to run them or pipe the new Boyds tank, and trying to get the cab to the body shop. The state has to come give me a new rebuilt vin if i use said cab, which won't match the frame and the motor. Can't find a good shortbed floor for my bed, the list goes on and on. Ugh what a pitb.
Amazing how much it wears you down when you get to a point. Should have bought a done truck.
Anyway, rant over.

[Zoomin]

I hear ya bro!

Just take it in bite size chunks and eventually you'll make it. I have a whole new level of appreciation for the vehicles in display at car shows.
Posted via Mobile Device

[no moa]

Thanks Zoomin. Gonna sit next to it with a beer this afternoon and try to decide my next move.

[no moa]

So change of powerplant for this build. Yesterday i bought a GM "SRTA" 4l80e rebuilt tranny for $100. It has 100 miles on it, took it from a 95 van and its been in his garage for while, with that i decided a LQ4/9 is in my future. The 454 i wanted to use is still available, but i think the old man wants to put it in his next blazer. Fine with me, i want better mileage than the 454 will give me.
So the work to save $ and fine a good LQ4/9 is on. Biggest issue will be wiring (i have no clue on what i'll need) and fuel. Going to spend some time reading over on the LSX swap pages.
Going to order up brake lines here pretty quick also.