67 GMC super custom build

[chewychevy67]

I had chicago carburetor do the carb. The rear diff is a dana 44, commonly used in gmc rear leaf setups and the alternator is a 20dn type 150 alternator. They were optional on trucks in 67.

[nlped]

Just read the whole thread and this is ONE beautiful truck. Love your meticulous attention to detail. Subscribed!

[chewychevy67]

I got the passenger side finished up today. Here's what it looks like. I think that this exhaust manifold is cracking so I will need to get another one. Does anyone know what coating is on the smog tubes from factory? Anything out there that will last on these?

[chewychevy67]

sorry for all the motor pics guys but I do this for myself so I can see these anywhere I go rather than running home to my computer all the time. sure you guys don't mind. rebuilt carb on now, dizzy and plug wires. Never had a set of pre-made wires fit so well out of the box. now to tear it apart and rebuild it all. still would like to know where the Smog signal hose goes if anyone knows.

[67chevy1series]

Even though the engines old and crusty I still want to say it's looking good. And keep the progress comin!

[chewychevy67]

took my smog pump apart tonight. Going to have the aluminum case colored as the fuel pump is. clean up and de-vein it.

[chewychevy67]

good and bad today. got my smog pump together but found out the bondo in my cab is cracking in both kick panels under finished paint. the body shop I used was a mistake. I have since parted with them but I have paid for crappy work which I will pay for again. I believe I am going to have the cab brought back to the metal to see what else hides under the primer. don't trust their work at all. The next shop I use I will get references. lesson learned but the build will go on. I would rather have this happen now at this stage than when it is all assembled and finished.

[gdavis]

went thru your build again. you have come a long way. You are doing a great job and sorry to hear about the body shop. That is why I did all the work myself. 98 % anyway. Was the guy that did your webbing a fellow board member? I need a set done for me.

[chewychevy67]

A company named Snake Oyl did my seat belts. Did a very nice job too. You can find them on the web. I wish my welding skills were better. I would do my body work as well.

[chewychevy67]

well since I am going to redo my cabs body work I am going to add power vent windows and locks to the truck. I think I know how I am going to do it. anyway I finally found the correct era style switch for the vent windows to match my other switches. I am not sure the locks are really worth it as the lock pops up when you close the door but I already have them and the switches so Ill add them in. ill keep you posted when I fab up some stuff for the windows. here is what the metal switches look like.

[chewychevy67]

A little change in plans. I got a Brothers Deluxe oak bed wood kit local for a really good price so i decided to use it on this build. Got it stained up this evening. I tested a small piece and cleared it to see what it will look like.

[darkhorse970]

That bed wood looks very nice!

[mcbassin]

Sorry to hear about the body shop problems. That's a pretty common problem when it comes to finding a good quality shop to work old trucks. Nice work on the wood floor and engine.

[chewychevy67]

I cleared the oak once this morning!

[swamp rat]

What stain did you use?

[chewychevy67]

I used a color called arrowhead. It is the same as the stain on the maple i was going to use earlier in the build. I had my cabinet guy mix it up for me.

[chewychevy67]

I was tinkering with this 70's Cadillac thermometer and this is what I came up with. Not sure if I am going to keep this just a tinker. has Celcius and Ferinheit and is fairly accurate. It lights up and will mount to the mirror arm. I wiped off the Cadillac decal and if I do use this I am going to have a GM decal made for the end. What do you guys think, cool or quirky?

[swamp rat]

I missed your reply on the stain color, i really like it as it something you don't see every day.
Per the temp gauge i say you got nothing to loose if ya try it, you can always take it off and weld up the holes and re paint it if you don't like it.

[chewychevy67]

I got my 67 impala steering wheel all restored but it got painted black instead of red. I do kind of like it in black but unsure if I want to paint my column black with a full red interior. what do you guys think? black column and wheel or red?

[Lee H]

Very nice!! I'll vote for red.

[gdavis]

still looks ok I see you painted the column also sweet

[chewychevy67]

the more I look at it the steering wheel/column needs to be red. The black just stands out too much. Black looks good in the newer stuff but looks awkward to me in 67 68 trucks. it doesn't have a supporting cast like black dash pad, rug and belts is what I think does this.

[swamp rat]

yep, it looks good!

[Orange67]

I vote red, but I may be biased... The pic with the buddy's is what mine should look like. Amazing build, hope mine will be half that nice!

[chewychevy67]

Well I sold the power door locks but ordered the power vent window motors this morning. Hope I can get them working properly. ive never seen power vent windows done in a 67 72 truck. Will be neat!