|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-18-2004, 12:49 PM
|
#1 |
|
Registered User
Join Date: Apr 2001
Location: Detroit Lakes, Minnesota
Posts: 885
|
Installing cab,rad/mounts in K10... how do i do it?
just recived my cab and radiatior mounts for my 67 k10, and i need suggestions on how should i approach this. i have all the tools and a jack and such. ive never done this before and i just need to know what to do first and so on. let me know asap
matt
__________________
1971 k5 blazer 80k mike survivor 1972 3/4 ton 4wd Cummins 12v 1967 swb 2wd 427bbc 1968 4wd shortbox 1971 Cheyenne swb k10 unrestored 1971 Cheyenne super 40k 402bb survivor 1967 Chevy k10 (first truck) 1968 L78 camaro survivor 18k miles 1969 z28 survivor 60k miles 1969 z28 survivor 39k miles 1969 z28 rs survivor 80k miles |
|
|
|
04-18-2004, 04:03 PM
|
#2 |
|
Account Suspended
Join Date: Sep 2000
Posts: 4,002
|
Undo all the bolts, put your parking brake on as the shifting may knock your truck out of gear. Jack up one area at a time and replace the mount in that area. While jacking keep an eye on your fender to door clearance, if you jack the cab up too much the edge of the fender may come in contact with the edge of the doors.
|
|
|
|
|
04-18-2004, 06:02 PM
|
#3 |
|
PROJECT 7DEUCE
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
I would also watch the brake line's and fuel line's ..... And watch so that the bumper's do not come it to contact with the fender's....
__________________
GO BIG GREEN  GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
04-18-2004, 06:38 PM
|
#4 |
|
Registered User
Join Date: Apr 2001
Location: Detroit Lakes, Minnesota
Posts: 885
|
well its all done, thanks for your good info. I just took the bumper off since it was a close fit. it looks a lot better now with new rubber mounts. i just have to get my front bumper to fit a little better and thats about it. thanks again !
matt
__________________
1971 k5 blazer 80k mike survivor 1972 3/4 ton 4wd Cummins 12v 1967 swb 2wd 427bbc 1968 4wd shortbox 1971 Cheyenne swb k10 unrestored 1971 Cheyenne super 40k 402bb survivor 1967 Chevy k10 (first truck) 1968 L78 camaro survivor 18k miles 1969 z28 survivor 60k miles 1969 z28 survivor 39k miles 1969 z28 rs survivor 80k miles |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
