|
04-19-2004, 09:08 AM
|
#1 |
|
user # 2756
 
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
wtb - speedo cable
Need a speedometer cable for my 70 chevy(71 chassis), it has to go from the NP205 to the speedometer. Needs to be complete at the transfer case end.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|
|
|
|
04-19-2004, 10:45 AM
|
#2 |
|
KEEP ON TRUCKING
Join Date: Sep 2000
Location: martinsville va
Posts: 2,563
|
check with the the vendors not sure about 4x4 but the 2wd ones are less than $25 dont know if there is a difference
__________________
72 cheyenne 2wd lwb 71 k20 sons bassett va |
|
|
|
|
04-19-2004, 11:10 AM
|
#3 |
|
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
Thanks, I see GMC Pauls has them for $15. 63" or 83" I assume I'd need the 83". I'll have to measure my 70 GMCs.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm
|
|
|
|
|
04-19-2004, 11:22 AM
|
#4 |
|
KEEP ON TRUCKING
Join Date: Sep 2000
Location: martinsville va
Posts: 2,563
|
the last one i got i told them what trk/trans setup i had he will be able to tell you which one you need.good luck
__________________
72 cheyenne 2wd lwb 71 k20 sons bassett va |
|
|
|
|
04-19-2004, 01:51 PM
|
#5 |
|
What was I thinking??
Join Date: Dec 2003
Location: Commerce City Co
Posts: 636
|
I just got one for my 72 K5 I want to say I got a 83in and it is a little on the long side but works you should go to Carquest or NAPA. I paid 17.00 or something close to that.
Cethern
__________________
72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit... |
|
|
|
|
04-19-2004, 02:31 PM
|
#6 |
|
Registered User
Join Date: Nov 2003
Location: Monroe, La 71202
Posts: 317
|
autozone 14 and tax
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
