![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
All Go, No Show
Join Date: Jul 2003
Location: Creighton SK
Posts: 286
|
HELP! truck won't crank
I just put the cab on and wired up the ignition, new soleniod on starter. Battery has 12.50V. 12.50 volts at starter, 12.50 volts at alternator. Jump in the cab, turn the key, nothing. multimeter shows 12.50 volts at starter. now the history..
When I took the starter off it had a wire going to the R terminal and a wire going to the s terminal. The truck has HEI installed on it so I don't need the wire going to the r terminal right? Second question the wire that i clipped off going to the r terminal was white not yellow and it was tied in with the wire that goes to the distributor(pink) at the firewall connector, should this wire go back on the r terminal? The ignition switch i have was given to me so i don't know if it works or not. I am going to go back out and see if i have power going to the switch. and hopefully when i come back in there will be a mess of info on here ![]() Hope this is as clear as mud. the engine is a mid 80's 305 and the cab and ignition switch are from a 67 GMC c10 Thanks in advance guys and girls
__________________
69 LWB Rebuilt 283, aluminum intake, edelbrock carb, Mild Melling Cam, HEI. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
do you have the wiring hooked up to the syeering column especially the purple wires going to the neutral safety switch?? you also must get rid of the original wire going to the distributor(original wire is a resistor not supplying a full 12volts)
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#3 |
All Go, No Show
Join Date: Jul 2003
Location: Creighton SK
Posts: 286
|
i got it!!!
I firgured it out. took ignition connector off and i wasn't getting 12 volts to the key.
![]() ![]()
__________________
69 LWB Rebuilt 283, aluminum intake, edelbrock carb, Mild Melling Cam, HEI. |
![]() |
![]() |
![]() |
#4 |
Account Suspended
Join Date: May 2002
Location: I let ya know as soon as I know
Posts: 3,593
|
YAY Dustin...now how bout ya mosey on over to Copco and get Tim's roaring too!
![]() ![]() ![]() |
![]() |
![]() |
![]() |
#5 |
All Go, No Show
Join Date: Jul 2003
Location: Creighton SK
Posts: 286
|
he would probably love that. He better have that thing on the road by may long or that 10 bucks is mine
![]()
__________________
69 LWB Rebuilt 283, aluminum intake, edelbrock carb, Mild Melling Cam, HEI. |
![]() |
![]() |
![]() |
#6 |
Account Suspended
Join Date: May 2002
Location: I let ya know as soon as I know
Posts: 3,593
|
I thought more was at stake. I'll get the thing running just so you don't get the $10!!!
![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|