2wd coil lift - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dregs454 · 05-12-2004, 01:04 AM

I have a 72 c20 and i want a little more ground clearance(2-3"), and i want to level it out. its coils front and back, I thought of getting 1 ton coils all around, but i'm not sure if such a thing exists, and i'm sure the ride would be terrible. I could also get new 3/4 coils to replace my worn out 3/4 coils - that might raise it a bit, but i was wondering if anyone had any other ideas to get 2-3 inches lift in a C20

Longhorn Man · 05-12-2004, 06:10 AM

Anyone have a link to the thread that came up 3 weeks ago? I tried a search but no luck.

slam33 · 05-12-2004, 10:25 AM

http://67-72chevytrucks.com/vboard/s....php3?t=100058 1 tons won't do any lifting, I tried the same thing with 3/4's on my 1/2t and only got a stiffer ride out of it. BB springs will lift it in a SBC but it also gets you a stiff ride.

dregs454 · 05-12-2004, 01:13 PM

thanx guys, Slam33 - you said that big block coils would lift a SB truck, but would big block coils be taller than stock 3/4 ton coils? i'm not sure if they came in BB and SB forms... also, could you post the picture of your truck? it doesn't seem to be in the other thread. also, do you have anymore info about the plate you used to lift the front? thanx

Longhorn Man · 05-12-2004, 05:19 PM

one note, you won't find one ton coils for the back...they were all leaf spring trucks.

05-12-2004, 01:04 AM	#1
dregs454 Killin' Time Join Date: Jul 2002 Location: Calgary, Alberta Posts: 221	2wd coil lift I have a 72 c20 and i want a little more ground clearance(2-3"), and i want to level it out. its coils front and back, I thought of getting 1 ton coils all around, but i'm not sure if such a thing exists, and i'm sure the ride would be terrible. I could also get new 3/4 coils to replace my worn out 3/4 coils - that might raise it a bit, but i was wondering if anyone had any other ideas to get 2-3 inches lift in a C20 __________________ NEED CORVETTE 1972 GMC C20 350, SM465, HEI Dynomax headers and 2.5" duals

05-12-2004, 10:25 AM	#3
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	http://67-72chevytrucks.com/vboard/s....php3?t=100058 1 tons won't do any lifting, I tried the same thing with 3/4's on my 1/2t and only got a stiffer ride out of it. BB springs will lift it in a SBC but it also gets you a stiff ride. __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

05-12-2004, 01:13 PM	#4
dregs454 Killin' Time Join Date: Jul 2002 Location: Calgary, Alberta Posts: 221	thanx guys, Slam33 - you said that big block coils would lift a SB truck, but would big block coils be taller than stock 3/4 ton coils? i'm not sure if they came in BB and SB forms... also, could you post the picture of your truck? it doesn't seem to be in the other thread. also, do you have anymore info about the plate you used to lift the front? thanx __________________ NEED CORVETTE 1972 GMC C20 350, SM465, HEI Dynomax headers and 2.5" duals

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-12-2004, 06:10 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Anyone have a link to the thread that came up 3 weeks ago? I tried a search but no luck.

05-12-2004, 05:19 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	one note, you won't find one ton coils for the back...they were all leaf spring trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.