Need Intake Manifold for '67 GMC 351 V6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mlash · 05-13-2004, 11:12 PM

I'm in dire need of finding an outfit that can supply an intake manifold for a 1967 GMC pickup with a 351E V6. The manifold I have is broken at one of the bolt down holes. Any manifold (new or used) will help me out. I do need the same manifold as I just ordered an adapter and a new carb for the broken one I have. Any help is greatly appreciated.

Longhorn Man · 05-13-2004, 11:13 PM

is this the same as the 305 V-6?
Where you located?

mlash · 05-13-2004, 11:35 PM

It should be if it is a '67. We're hiding up here in Montana.

Longhorn Man · 05-13-2004, 11:39 PM

Hmmm, I have access to a 71 or 72 GMC one ton with a 305, and I know there used to be a 60 - 66 Chevy with a 305/351 engine, but I think that truck is gone.
I am heading to the yards tomorow if the rain holds out.
Shipping would be a real bummer from Columbus Ohio...but I am willing.
I can have the manifold chemicly cleaned and painted to if that kind of stuff matters to you.

mlash · 05-13-2004, 11:45 PM

Any chance of getting a picture? No need in somethin' that won't allow the new carb to fit up to.

mlash · 05-13-2004, 11:47 PM

Is there anyone who deals in parts for these beasts? I'm lookin' at an overhaul here soon and I'm gonna need a whole bunch of items.

krazy_texan · 05-13-2004, 11:54 PM

i forget the website but go to any search engine and type in 60-66 gmc trucks, there is a guy that has a website with loads of info on these engines and even the 702 twin six, might want to try him, i am going to a swap meet tommarrow i will keep my eyes peeled

Longhorn Man · 05-14-2004, 12:25 AM

That would be the Jolly site.
http://www.6066gmctrucks.org/305V6.htm

I'll get some pics for you tomorow.

Erl · 05-14-2004, 10:12 AM

Go to the Jolly site like Longhorn said. Then get on the 6066 Board and ask if anyone has a manifold. Someone will have an extra. I have added the 500 CFM holley that Jolley recommends, and it works great. All this info is on his web site.

05-13-2004, 11:12 PM	#1
mlash Registered User Join Date: May 2004 Posts: 4	Need Intake Manifold for '67 GMC 351 V6 I'm in dire need of finding an outfit that can supply an intake manifold for a 1967 GMC pickup with a 351E V6. The manifold I have is broken at one of the bolt down holes. Any manifold (new or used) will help me out. I do need the same manifold as I just ordered an adapter and a new carb for the broken one I have. Any help is greatly appreciated.

05-13-2004, 11:54 PM	#7
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	i forget the website but go to any search engine and type in 60-66 gmc trucks, there is a guy that has a website with loads of info on these engines and even the 702 twin six, might want to try him, i am going to a swap meet tommarrow i will keep my eyes peeled __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

05-14-2004, 10:12 AM	#9
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	Go to the Jolly site like Longhorn said. Then get on the 6066 Board and ask if anyone has a manifold. Someone will have an extra. I have added the 500 CFM holley that Jolley recommends, and it works great. All this info is on his web site. __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-13-2004, 11:13 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	is this the same as the 305 V-6? Where you located?

05-13-2004, 11:35 PM	#3
mlash Registered User Join Date: May 2004 Posts: 4	It should be if it is a '67. We're hiding up here in Montana.

05-13-2004, 11:39 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Hmmm, I have access to a 71 or 72 GMC one ton with a 305, and I know there used to be a 60 - 66 Chevy with a 305/351 engine, but I think that truck is gone. I am heading to the yards tomorow if the rain holds out. Shipping would be a real bummer from Columbus Ohio...but I am willing. I can have the manifold chemicly cleaned and painted to if that kind of stuff matters to you.

05-13-2004, 11:45 PM	#5
mlash Registered User Join Date: May 2004 Posts: 4	Any chance of getting a picture? No need in somethin' that won't allow the new carb to fit up to.

05-13-2004, 11:47 PM	#6
mlash Registered User Join Date: May 2004 Posts: 4	Is there anyone who deals in parts for these beasts? I'm lookin' at an overhaul here soon and I'm gonna need a whole bunch of items.

05-14-2004, 12:25 AM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	That would be the Jolly site. http://www.6066gmctrucks.org/305V6.htm I'll get some pics for you tomorow.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.