68 C10 parts for sale soon

[glock35ipsc]

I still have a few parts left off of the 68. If you need anything not listed, let me know, as I am not sure what I will reuse and what I will sell.

3-SPEED TRANNY, LINKAGES, PEDALS, CROSSMEMBER, AND STEERING COLUMN - Everything works great. I was driving this truck until I got hit. Shifted fine, turn signals stayed on and canceled correctly. $200 for all

HOOD - Rust free, has all of the CHEVROLET letters that are in good condition. The hood has some hail dings, and about 75%-85% could be easily removed from the bottom side. The ones along the sides that have another layer of metal under them may be challenging (at least for me). Most of what you see is just dirt. Hood and letters only, no latch or hinges. $50



DOORS - Again, the driver’s door got hit, but I believe a replacement skin would fix this one just perfectly. It still closes as easily now as it did before the accident, so I feel confident that it didn’t get tweaked. There are NO speaker holes in these doors! Door shell only, no glass or other hardware. $10 for the drivers door. PASS DOOR SOLD


TAILGATE - Aftermarket tailgate. Good and rust-free, but has a boo-boo near the handle. No hardware (latch handle, rods, etc.). $20


DISC BRAKE FRONT END out of a 72 C10. Crossmember, upper and lower control arms, and stock spindles. Assembled, and unbolted from the frame. I can put it on a pallet. $50 plus ship.

I would prefer these to be picked up locally, but I am willing to ship via FedEx Freight or Greyhound. Or if someone is doing a parts run and going past me they could pick them up for you.

Email me if you need something that is not listed here, I will see what I can do

[glock35ipsc]

ttt, now with some pics!

[Ice68]

Hello,
I'm interested in the tailgate and the bed. I live near Durango, CO.
Thanks,
Leroy

[D.PASSMORE]

I'll take the fenders if you will box and ship. Florida 32968. Grey hound is a good way to ship these.

[glock35ipsc]

OK, so far:

Ice68 has dibs on the bed,

71 shortbox has dibs on the tailgate, followed by sparky69, then Ice68

D.PASSMORE has dibs on the fenders. I will check into the Greyhound thing. I don't think we have a depot around here anymore. If not, I would prefer to ship FedEx Freight. I will check on rates when I get them off and gets weights.

Thanks everyone!!!

[D.PASSMORE]

Please e-mail me when you find out, my email addy is in my signature. Thanks and good luck on your project.

[glock35ipsc]

Ice68 and D. Passmore, you have PM's!

[smonty]

How much for the tailgate! HEHEHE!!!.

[glock35ipsc]

Ice68, I need your email address to send some pics.

Smonty - Ice68 is thinking about both the bed and tailgate, I'll let you know.

[emmett]

Glock35
I would be interested in the tailgate how far do you live from I-80 I am heading to Ogden UT, July 7 if it's still avaliable and your not to far frum I-80 I could pick it up PM me and let me know.
Thanks EMMETT

[jose]

Any pictures of the passenger side door ? Do you still have it ? Interested in the drivers side outside mirrow also My zip 97301 .

[orangeuavol]

are the 6 lug rallyes 8" or 10"?

[Bamm]

pm sent...........

[glock35ipsc]

Originally Posted by jose

Any pictures of the passenger side door ? Do you still have it ? Interested in the drivers side outside mirrow also My zip 97301 .

Email sent

[glock35ipsc]

Originally Posted by orangeuavol

are the 6 lug rallyes 8" or 10"?

orangeuavol, PM sent

[dmnall]

If the doors are available and the fenders are available, I am interested in both, just need to find out how much shipping would be too 93117.

Charlie

[glock35ipsc]

Originally Posted by dmnall

If the doors are available and the fenders are available, I am interested in both, just need to find out how much shipping would be too 93117.

Charlie

Sorry for the delay. I only have the pass side left. It cost just over $55 to send the other one to Oregon, so shipping should be about the same.