C-30....Would have been handy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Castiron9 · 05-21-2004, 10:32 PM

Hey Frank..could have used the one-ton you have for sale today.

.Demolition wood from remodel going to the dump..The 67 will have to do 'the old truck hasn't let me down yet...I love these trucks............Maybe on my next trip...I will be running it on the one-ton.......

71Rat · 05-21-2004, 10:42 PM

nice truck, one day i helped out my sister by taking all the scrap wood from her deck to throw out. at a traffic light some guy started yelling at me telling me my '71 chevy was a 50 somthing chevy and it shouldnt be used to haul anything. i was sooo amazed that this guy was yelling at me all i could spit out was it's a 1971 chevy truck and trucks were ment to be used, plus i built it..... the guy kept yelling and wouldnt beleave me. But very nice truck and i am glad to see people using them for what they were designed to be used for....... not like today when u get a 4x4 or a pickup just to say you have 4 wheel drive or a pickup but dont use it for what it is intended to be used for.

Rat

Castiron9 · 05-21-2004, 11:02 PM

Amen....brother

Longhorn Man · 05-21-2004, 11:16 PM

You shoulda seen my SWB last week. (bummer I didn't have my camera with me) I had the rear coils completely stacked up...basicly in coil bind loaded down with bricks. Mufflers got some scratches on them, and it almost didn't make it into my dad's driveway, but the ol'girl didn't let me down.
Stopping it was fun though.

**PICKMUP** · 05-21-2004, 11:55 PM

Wait til you see what that 1ton flatbed will haul with the 4' high racks on the sides!

rockguy · 05-22-2004, 08:27 AM

I just put a set of 5000lb air bags in my 69 1 ton dually. now this truck can haul some sh**.

*dtlilly* · 05-22-2004, 01:04 PM

Heck, you don't even have it squated down with that load, these trucks are like timex watches...take a licking, and keep on ticking, lol.

OhioDan · 05-22-2004, 04:40 PM

Like everyone else, I don't like F@@ds. But ya gotta admit, this one is tough! Maybe we should use them to haul anything heavy?

**Canadian694x4** · 05-22-2004, 10:31 PM

I too think it's great that you use your truck! This year I've been able to use my truck more than ever before and I Love it. Looking good Man!

Longhorn Man · 05-23-2004, 12:15 AM

Take a look at the truck that the 'plump' chicks are in...that's a chevy. The ford is off to the left.

krazy_texan · 05-23-2004, 12:48 AM

i cant believe you looked at that picture good enough or long enough to tell that, i caught a glimpse and kept scrollin

Longhorn Man · 05-23-2004, 12:52 AM

honestly, I instntly recognised the tail lights and saw the word ford...that caused a second look which induced volmiting and shortness of breath.

**Canadian694x4** · 05-23-2004, 01:08 AM

Quote:

Originally Posted by Longhorn Man

honestly, I instntly recognised the tail lights and saw the word ford...that caused a second look which induced volmiting and shortness of breath.

LMFAO!!!!!!!!!!!!!!!!!!

Chevyguy111786 · 05-23-2004, 04:20 AM

i recognized the tail lights but thought it was because it's 3.30 am....so thanks for clearin that up...that's halarious though, that it's a chevy....what exactly is Ford Tough? i mean you could call a gay guy Fag Tough...but that might mean he's weak as sh't

super-k · 05-23-2004, 06:49 AM

I recognized it was a GM,too.Then I noticed,"Dang!What`s that thing haulin`?"Just shows where our priorities are.Didn`t look long enough to see a Ford,though.Remember when the"truck-owners"of today made fun of the hillbillies in the pick-up truck yesterday?I remember laughing at them driving down the road,one arm out the window,trying to hold a sheet of 1/4"paneling on,along with some string.

OhioDan · 05-23-2004, 07:27 AM

Glad to see everyone still has a sense of humor. Saw that and it just kinda fit. Was told the truck was a F@@d. Didn't have my glasses on. I always thought they used a semi to haul hogs? Maybe the guy worked for GreenPeace and was just trying to get them back into the water?

Castiron9 · 05-24-2004, 12:46 AM

42...panels of roof sheating sitting on the LONGHORN..Hoping the guy delivering the trusses tomorrow for the new house addition will raise them up to the second level..other wise it's one panel at a time...I..LOVE our trucks..............Chevy tough....

highboy_04 · 05-24-2004, 12:57 AM

too bad i never got a pic of my old '67 3/4 ton with the mustang loaded in the back. and not a horse i'm talking about a ford mustang. it was just the shell no front clip or doors but it still was funny looking and the rear of the truck didnt even squat.

05-21-2004, 10:32 PM	#1
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	C-30....Would have been handy Hey Frank..could have used the one-ton you have for sale today. .Demolition wood from remodel going to the dump..The 67 will have to do 'the old truck hasn't let me down yet...I love these trucks............Maybe on my next trip...I will be running it on the one-ton....... Attached Images __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

05-21-2004, 10:42 PM	#2
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	nice truck, one day i helped out my sister by taking all the scrap wood from her deck to throw out. at a traffic light some guy started yelling at me telling me my '71 chevy was a 50 somthing chevy and it shouldnt be used to haul anything. i was sooo amazed that this guy was yelling at me all i could spit out was it's a 1971 chevy truck and trucks were ment to be used, plus i built it..... the guy kept yelling and wouldnt beleave me. But very nice truck and i am glad to see people using them for what they were designed to be used for....... not like today when u get a 4x4 or a pickup just to say you have 4 wheel drive or a pickup but dont use it for what it is intended to be used for. Rat __________________ Modify everything, leave nothing alone!~

05-21-2004, 11:02 PM	#3
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Amen....brother __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

05-21-2004, 11:55 PM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Wait til you see what that 1ton flatbed will haul with the 4' high racks on the sides! __________________ Email: frankeham@comcast.net Phone: 360-956-7170

05-22-2004, 08:27 AM	#6
rockguy Registered User Join Date: Mar 2003 Location: Crystal Beach Florida Posts: 76	I just put a set of 5000lb air bags in my 69 1 ton dually. now this truck can haul some sh**. __________________ 69 c-30 dually flat bed & dump ( best truck ive owned 87 chevy dually 97 1500 classic 89 wellcraft

05-21-2004, 11:16 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	You shoulda seen my SWB last week. (bummer I didn't have my camera with me) I had the rear coils completely stacked up...basicly in coil bind loaded down with bricks. Mufflers got some scratches on them, and it almost didn't make it into my dad's driveway, but the ol'girl didn't let me down. Stopping it was fun though.

05-22-2004, 01:04 PM	#7
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Heck, you don't even have it squated down with that load, these trucks are like timex watches...take a licking, and keep on ticking, lol.

05-22-2004, 04:40 PM	#8
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Like everyone else, I don't like F@@ds. But ya gotta admit, this one is tough! Maybe we should use them to haul anything heavy? Attached Images __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

05-22-2004, 10:31 PM	#9
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	I too think it's great that you use your truck! This year I've been able to use my truck more than ever before and I Love it. Looking good Man! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

05-23-2004, 12:15 AM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Take a look at the truck that the 'plump' chicks are in...that's a chevy. The ford is off to the left.

05-23-2004, 12:48 AM	#11
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	i cant believe you looked at that picture good enough or long enough to tell that, i caught a glimpse and kept scrollin __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

05-23-2004, 12:52 AM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	honestly, I instntly recognised the tail lights and saw the word ford...that caused a second look which induced volmiting and shortness of breath.

05-23-2004, 04:20 AM	#14
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	i recognized the tail lights but thought it was because it's 3.30 am....so thanks for clearin that up...that's halarious though, that it's a chevy....what exactly is Ford Tough? i mean you could call a gay guy Fag Tough...but that might mean he's weak as sh't

05-23-2004, 06:49 AM	#15
super-k Registered User Join Date: May 2004 Location: Mt.Airy,MD Posts: 123	I recognized it was a GM,too.Then I noticed,"Dang!What`s that thing haulin`?"Just shows where our priorities are.Didn`t look long enough to see a Ford,though.Remember when the"truck-owners"of today made fun of the hillbillies in the pick-up truck yesterday?I remember laughing at them driving down the road,one arm out the window,trying to hold a sheet of 1/4"paneling on,along with some string. __________________ 72CheyenneSuperK20CustomCamper350/TH350,A/C 72SierreGrandeK2500350/TH350,A/C 72CustomDeluxeK20CustomCamperSB400/4SPD.A/C 72CustomC10SWB,TH400,project

05-23-2004, 07:27 AM	#16
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Glad to see everyone still has a sense of humor. Saw that and it just kinda fit. Was told the truck was a F@@d. Didn't have my glasses on. I always thought they used a semi to haul hogs? Maybe the guy worked for GreenPeace and was just trying to get them back into the water? __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.



Register or Log In To remove these advertisements.

05-24-2004, 12:46 AM	#17
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	42...panels of roof sheating sitting on the LONGHORN..Hoping the guy delivering the trusses tomorrow for the new house addition will raise them up to the second level..other wise it's one panel at a time...I..LOVE our trucks..............Chevy tough.... Attached Images __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY Last edited by Castiron9; 05-24-2004 at 12:49 AM.

05-24-2004, 12:57 AM	#18
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	too bad i never got a pic of my old '67 3/4 ton with the mustang loaded in the back. and not a horse i'm talking about a ford mustang. it was just the shell no front clip or doors but it still was funny looking and the rear of the truck didnt even squat. __________________ '67 c10 350/th350

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.