Left Overs! Motor, Tranny, Power Brakes, Steering Gear - The 1947 - Present Chevrolet & GMC Truck Message Board Network

J.Lance · 06-03-2004, 11:52 PM

Decided to clean up and post the parts that are left and add a few more. I’ll delete the old post soon so please reply here.

Altenator Brackets, noticed a crack in the top bracket in the skinny section, bottom bracket nice and solid: $15 + shipping

Power Brake set-up for drum brakes. Includes booster (small diameter style), master cyl., prop. valve, brackets, and rod. Looks to have had either a new or reman. booster (sale pending): $50 + shipping

Power Brake set-up for ¾ Ton disc front. Includes everything mentioned above, I’m sure it will work fine for ½ ton also, just adds some fluid capacity: $60 + shipping or $50 + shipping w/o MC and prop. valve.

Power Brake set-up for 1/2 Ton disc front. Includes everything mentioned above: $60 + shipping or $50 + shipping w/o MC and prop. valve.

TH350, worked very well, needs sealed: SOLD

Also, I still have lots left on this truck for local pick up. It is a '72 custom camper 3/4 ton 2wd. Nice frame, Dana 60 leaf spring rear with 4.10s (previous sale fell through), disc front, and a '71 GMC 4x4 cab with solid floors but needs rockers and corners.

Thanks.

Jason

truckpower429 · 06-04-2004, 10:32 AM

Hey J.Lance any idea on the condition of the 1/2 ton power disc master cylinder and porp. valve. ?? let me know im interested thanks , Willie

J.Lance · 06-04-2004, 12:01 PM

Quote:

Originally Posted by truckpower429

Hey J.Lance any idea on the condition of the 1/2 ton power disc master cylinder and porp. valve. ?? let me know im interested thanks , Willie

Honestly...can't say too much about it. I believe it was coupled to the booster and brackets I used on my '68. At the time I hadn't swapped to disc front yet so I just reused the master cylinder that was already on my truck. Just found it in the garage last night when I was rummaging for other parts. Like I said, could definitely use cleaned up as it seems pretty greasy. The lines are in good shape. I'll have to pull the the cap and make sure there are no surprises hiding inside! I'll let you know.

Jason

J.Lance · 06-06-2004, 12:22 AM

ttt

Side Note...I found out that these small diameter boosters could be found on early (67-69ish) 3/4 tons. Thinking about keeping one for my '68, I really like how compact they are compared to the Bendix and Delco styles.

J.Lance · 06-07-2004, 10:35 PM

TTT???!!! Would love to get this stuff gone but I suppose I have cleared up some shelf space!

biglou55 · 06-08-2004, 09:50 AM

J Lance do you still have the power steering gear. If you do I will take it for that price. How much to 01301 greenfield mass. thank,s biglou55. lou. hale. how do you want to get paid

.

J.Lance · 06-08-2004, 11:38 AM

Quote:

Originally Posted by biglou55

J Lance do you still have the power steering gear. If you do I will take it for that price. How much to 01301 greenfield mass. thank,s biglou55. lou. hale. how do you want to get paid

.

Sent you a pm. Thanks.

Jason

camelot · 06-08-2004, 07:09 PM

Anyone coming toward California? I'd like the motor

J.Lance · 06-10-2004, 09:58 AM

BTT...I potentially sold the rear diff out of the truck. I'll sell the chassis, disc front, title, and v.i.n. for $200, obo, or parts. Thanks.

Jason

glock35ipsc · 06-10-2004, 01:32 PM

PM sent on the engine and transmission. I am near Fort Collins.

J.Lance · 06-10-2004, 02:32 PM

Quote:

Originally Posted by glock35ipsc

PM sent on the engine and transmission. I am near Fort Collins.

Sent you a pm. Just saw your post for the 6 cyl. I'll keep my eye out for that too!

Jason

bgood · 06-14-2004, 01:12 AM

I need a power brake booster with brackets/linkage for a 67 chevy, Still want to sell the small black one? To ship to Zip 36203. Just let me know.

2) Power Brake set-ups for drum brakes. Includes booster (small diameter style), master cyl., prop. valve, brackets, and rod. One of these looks to have had either a new or reman. booster: $50/ea. + shipping

You have a P.M. thanks

Quagmire · 06-14-2004, 06:43 PM

also interested in a brake booster setup for a drum/drum. how much shipped to 73170?

thx!

J.Lance · 06-14-2004, 10:38 PM

Quote:

Originally Posted by Quagmire

also interested in a brake booster setup for a drum/drum. how much shipped to 73170?

thx!

I'll check on that and get back to you in a pm. Thanks.

Jason

outlawchevy · 06-21-2004, 10:23 AM

do you still have the TH350,

J.Lance · 06-21-2004, 11:52 AM

Quote:

Originally Posted by outlawchevy

do you still have the TH350,

TH350 was sold on Saturday. On another note, you never did say whether or not you still wanted those valve covers so I sent an email to the other guy that was interested to see if he wanted them.

c10chevy69 · 06-22-2004, 10:28 PM

I am also interested in the power brake setup if you haven't sold it yet. Drop me a line.

J.Lance · 06-23-2004, 08:59 AM

Quote:

Originally Posted by c10chevy69

I am also interested in the power brake setup if you haven't sold it yet. Drop me a line.

I have two disc brake set-ups still available. Sent you a pm.

06-03-2004, 11:52 PM	#1
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	Left Overs! Motor, Tranny, Power Brakes, Steering Gear, Alt. Brackets Decided to clean up and post the parts that are left and add a few more. I’ll delete the old post soon so please reply here. Altenator Brackets, noticed a crack in the top bracket in the skinny section, bottom bracket nice and solid: $15 + shipping Power Brake set-up for drum brakes. Includes booster (small diameter style), master cyl., prop. valve, brackets, and rod. Looks to have had either a new or reman. booster (sale pending): $50 + shipping Power Brake set-up for ¾ Ton disc front. Includes everything mentioned above, I’m sure it will work fine for ½ ton also, just adds some fluid capacity: $60 + shipping or $50 + shipping w/o MC and prop. valve. Power Brake set-up for 1/2 Ton disc front. Includes everything mentioned above: $60 + shipping or $50 + shipping w/o MC and prop. valve. TH350, worked very well, needs sealed: SOLD Also, I still have lots left on this truck for local pick up. It is a '72 custom camper 3/4 ton 2wd. Nice frame, Dana 60 leaf spring rear with 4.10s (previous sale fell through), disc front, and a '71 GMC 4x4 cab with solid floors but needs rockers and corners. Thanks. Jason Attached Images __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!) Last edited by J.Lance; 06-23-2004 at 09:06 AM. Reason: sold items

06-06-2004, 12:22 AM	#4
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	ttt Side Note...I found out that these small diameter boosters could be found on early (67-69ish) 3/4 tons. Thinking about keeping one for my '68, I really like how compact they are compared to the Bendix and Delco styles. __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

06-07-2004, 10:35 PM	#5
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	TTT???!!! Would love to get this stuff gone but I suppose I have cleared up some shelf space! __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

06-08-2004, 09:50 AM	#6
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	J Lance do you still have the power steering gear. If you do I will take it for that price. How much to 01301 greenfield mass. thank,s biglou55. lou. hale. how do you want to get paid . __________________ Certifiably crazy person

06-08-2004, 07:09 PM	#8
camelot Registered User Join Date: Apr 2003 Location: Santa Clara, CA Posts: 39	350 motor Anyone coming toward California? I'd like the motor __________________ Camelot www.toyotagirl.com 1985 Chevy 4Runner 1972 GMC 4WD

06-04-2004, 10:32 AM	#2
truckpower429 Registered User Join Date: Nov 2003 Location: Okc, Oklahoma Posts: 33	Hey J.Lance any idea on the condition of the 1/2 ton power disc master cylinder and porp. valve. ?? let me know im interested thanks , Willie

06-10-2004, 09:58 AM	#9
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	BTT...I potentially sold the rear diff out of the truck. I'll sell the chassis, disc front, title, and v.i.n. for $200, obo, or parts. Thanks. Jason __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

06-10-2004, 01:32 PM	#10
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	PM sent on the engine and transmission. I am near Fort Collins. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

06-14-2004, 01:12 AM	#12
bgood Registered User Join Date: May 2004 Posts: 80	Need a brake booster. I need a power brake booster with brackets/linkage for a 67 chevy, Still want to sell the small black one? To ship to Zip 36203. Just let me know. 2) Power Brake set-ups for drum brakes. Includes booster (small diameter style), master cyl., prop. valve, brackets, and rod. One of these looks to have had either a new or reman. booster: $50/ea. + shipping You have a P.M. thanks

06-14-2004, 06:43 PM	#13
Quagmire A splendid one to behold Join Date: Jan 2004 Location: moore, ok Posts: 251	also interested in a brake booster setup for a drum/drum. how much shipped to 73170? thx! __________________ 67 swb 02 wrx

06-21-2004, 10:23 AM	#15
outlawchevy Registered User Join Date: Jan 2004 Location: Walker,louisiana Posts: 179	do you still have the TH350, __________________ (If all else fails get a bigger hammer)

06-22-2004, 10:28 PM	#17
c10chevy69 Registered User Join Date: May 2004 Location: Oklahoma City Posts: 205	I am also interested in the power brake setup if you haven't sold it yet. Drop me a line. __________________ 1969 chevy C10 long bed 350 4bbl auto p/disc and 5 lug

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.