|
06-07-2004, 08:39 AM
|
#1 |
|
Its Magically Delicious
Join Date: Jan 2003
Location: oregon
Posts: 2,398
|
electrical connectors
what size are the ring terminals for both the junction box and the starter ... i believe the starter has a 1/2 inch nut .. i think that would make the stud 3/8
The junction box looks like 1/4 inch thanks
__________________
71 C10 LWB 350sbc -TH350 12 bolt 3.42 Posi Of all my favorite things to do, The utmost is to have a brew. My love grows for my foamy friend, with each thirst-quenching elbow bend. Beer so frosty, smooth, and cold it's paradise pure liquid gold. Yes beer means many things to me that's all for now cus I gotta pee. |
|
|
|
06-07-2004, 08:48 AM
|
#2 |
|
Never enough time!!
Join Date: Mar 2004
Location: sw Wisconsin
Posts: 602
|
1/2 inch nut would be a 5/16 stud, 1/4 inch stud would take a 7/16 wrench, the main stud on the starter(wire from the battery) should be 3/8. If in question just take an open end wrench and slide the smallest one you can fit over the stud...the wrench size is the measurement of the stud's diameter
Last edited by 72gord; 06-07-2004 at 08:50 AM. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
