Polyurethane cab mount questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jason Spears · 06-07-2004, 09:44 PM

I'm in the process of installing new cab mounts on my truck. I purchased a set of Energy suspension body mounts. The instructions that came with the set says to reuse the existing hardware. From the illustration on the instructions it shows a "Factory Sleeve" (upper) and a "Factory Washer" (lower). The lower washer is no problem. It is listed in the LMC catalog and I am sure it will be available at the dealer. The upper washer is what I'm not sure about. I've looked in several catalogs I have laying around (LMC, Chevy Duty, Classic Industries) and this upper metal sleeve/washer seems to be part of the upper cushion on the stock body mounts. Do I just burn off the rubber on the original mounts and reuse the metal part? I want to have all of the parts ready to go when I start the job. Thanks for the help.

Jason Spears · 06-09-2004, 04:58 PM

Anybody???

TIMSPEED · 06-09-2004, 05:55 PM

I have that exact same kit under my truck, and I'm pretty sure the kit came with all the parts I needed. The only parts I needed to REUSE was the bolts.

83C · 06-09-2004, 08:48 PM

I purchased and installed the same kit last week. I used all my old hardware and the kit only came with the bushings. To remove the washers I put them in soapy water and the old rubber came off.

Jason Spears · 06-09-2004, 08:51 PM

This kit just came with six mounts. No hardware. I got new bolts with washers at the hardware store. I just ordered new lower retainers at the dealer today because mine are either rotted or missing. Like I said in the above post, its just the upper metal piece I'm wondering about. Thanks for the reply.

06-07-2004, 09:44 PM	#1
Jason Spears Registered User Join Date: Dec 2002 Location: Stoney Creek, ON Posts: 89	Polyurethane cab mount questions I'm in the process of installing new cab mounts on my truck. I purchased a set of Energy suspension body mounts. The instructions that came with the set says to reuse the existing hardware. From the illustration on the instructions it shows a "Factory Sleeve" (upper) and a "Factory Washer" (lower). The lower washer is no problem. It is listed in the LMC catalog and I am sure it will be available at the dealer. The upper washer is what I'm not sure about. I've looked in several catalogs I have laying around (LMC, Chevy Duty, Classic Industries) and this upper metal sleeve/washer seems to be part of the upper cushion on the stock body mounts. Do I just burn off the rubber on the original mounts and reuse the metal part? I want to have all of the parts ready to go when I start the job. Thanks for the help.

06-09-2004, 05:55 PM	#3
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	I have that exact same kit under my truck, and I'm pretty sure the kit came with all the parts I needed. The only parts I needed to REUSE was the bolts. __________________ I have a few cars... See Them Here

06-09-2004, 08:48 PM	#4
83C Registered User Join Date: May 2003 Location: Il Posts: 90	I purchased and installed the same kit last week. I used all my old hardware and the kit only came with the bushings. To remove the washers I put them in soapy water and the old rubber came off. __________________ 83 Chevy SWB http://www.cardomain.com/id/letheridge

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-09-2004, 04:58 PM	#2
Jason Spears Registered User Join Date: Dec 2002 Location: Stoney Creek, ON Posts: 89	Anybody???

06-09-2004, 08:51 PM	#5
Jason Spears Registered User Join Date: Dec 2002 Location: Stoney Creek, ON Posts: 89	This kit just came with six mounts. No hardware. I got new bolts with washers at the hardware store. I just ordered new lower retainers at the dealer today because mine are either rotted or missing. Like I said in the above post, its just the upper metal piece I'm wondering about. Thanks for the reply.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.