Cut off the roof, cut out the floor, and... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

big blue 72 · 06-24-2004, 11:13 PM

save the middle section of my 71 chevy cab?
all the dash , pillars, interior ceiling and rear cab , are in really good shape. just the entire floor, and the ol' crumbling roof near the drivers side are gone.
Should i save any of this?
i could bring up the good sections to the "Ohio Meet" later this summer.
Anybody want /have an interest in these interior panels?
I'm gonna go with the cab Fine 69 has for me since it will require about 10 less patch panels than what ive got now.
also acquired a couple of hoods: white, one dent, blue, scratched and original paint. will put them on parts page tomorrow.

silvertonguedevil · 06-24-2004, 11:49 PM

Does it have an AC dash? Has it been cut for a radio?

big blue 72 · 06-25-2004, 09:39 AM

plain jane dash and yes the knob holes are cut .
i didnt really post this as a joke, i just dont know whether to scrap it or save it ?

silvertonguedevil · 06-25-2004, 10:19 AM

I was just gonna say that the dash would be worth saving/selling if it was an uncut AC dash. I am not sure if the rest would be worth saving or not. I would continue to ask around. I'm sure somebody could use what you have.

06-24-2004, 11:13 PM	#1
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	Cut off the roof, cut out the floor, and... save the middle section of my 71 chevy cab? all the dash , pillars, interior ceiling and rear cab , are in really good shape. just the entire floor, and the ol' crumbling roof near the drivers side are gone. Should i save any of this? i could bring up the good sections to the "Ohio Meet" later this summer. Anybody want /have an interest in these interior panels? I'm gonna go with the cab Fine 69 has for me since it will require about 10 less patch panels than what ive got now. also acquired a couple of hoods: white, one dent, blue, scratched and original paint. will put them on parts page tomorrow.

06-24-2004, 11:49 PM	#2
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	Does it have an AC dash? Has it been cut for a radio? __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

06-25-2004, 10:19 AM	#4
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	I was just gonna say that the dash would be worth saving/selling if it was an uncut AC dash. I am not sure if the rest would be worth saving or not. I would continue to ask around. I'm sure somebody could use what you have. __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-25-2004, 09:39 AM	#3
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	plain jane dash and yes the knob holes are cut . i didnt really post this as a joke, i just dont know whether to scrap it or save it ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.