Need a Left-Front Spindle/Dually - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Castiron9 · 07-02-2004, 08:47 PM

Looking for a left front spindel for a 1-ton dually (1970) Im not sure if year if year will matter? Any leads would be appreciated. Maybe a north west board member could help me out. Thanks.

**67sss** · 07-02-2004, 10:15 PM

is the spindle of a 1 ton different than a spindle from a 3/4 ton? I know some of the parts are inner-changeable.

Tx Firefighter · 07-02-2004, 10:48 PM

I was told recently on this board that the 3/4 and 1 ton spindles are the same.

MACKL · 07-02-2004, 11:33 PM

I'v got a co-worker that has a 1 ton late model that he is trying to give the entire front end away (if someone will come get it). One problem, Dallas Texas area.

Bob Moore · 07-03-2004, 12:08 AM

I saw a drum brake left corner w/dually adapter attached on a 69/70 GMC
flatbed at Airport Auto Wrecking today - 7/2. It has been there a while and
will last a little longer - hopefully. The GMC was BB powered (now gone) and
had A/C. It's very picked over but I am sure the spindle was there.

Airport Auto Wrecking is on Hwy 3 past Gorst but before the Bremerton
Airport. They will be open Saturday for a while(July 3) closed Sunday as usual and open again Monday. Take tools and do it yourself for a better
price.

LOL - Bob

07-02-2004, 08:47 PM	#1
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Need a Left-Front Spindle/Dually Looking for a left front spindel for a 1-ton dually (1970) Im not sure if year if year will matter? Any leads would be appreciated. Maybe a north west board member could help me out. Thanks. __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

07-02-2004, 10:15 PM	#2
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,324	spindle is the spindle of a 1 ton different than a spindle from a 3/4 ton? I know some of the parts are inner-changeable.

07-02-2004, 10:48 PM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I was told recently on this board that the 3/4 and 1 ton spindles are the same. __________________ I'm on the Instagram- @Gearhead_Kevin

07-02-2004, 11:33 PM	#4
MACKL Almost done! Join Date: Apr 2004 Location: Woodstock GA Posts: 193	I'v got a co-worker that has a 1 ton late model that he is trying to give the entire front end away (if someone will come get it). One problem, Dallas Texas area. __________________ The 1970 SWB Project Removed 6cyl manual trans, manual everything V8-350 Auto/PS/PDB Blazer Fuel Tank Behind the Marker Light Fuel Fill

07-03-2004, 12:08 AM	#5
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Dually Spindle I saw a drum brake left corner w/dually adapter attached on a 69/70 GMC flatbed at Airport Auto Wrecking today - 7/2. It has been there a while and will last a little longer - hopefully. The GMC was BB powered (now gone) and had A/C. It's very picked over but I am sure the spindle was there. Airport Auto Wrecking is on Hwy 3 past Gorst but before the Bremerton Airport. They will be open Saturday for a while(July 3) closed Sunday as usual and open again Monday. Take tools and do it yourself for a better price. LOL - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.