Carpet Bedliners? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Orange '71 GMC · 07-12-2004, 08:39 AM

This seems like the solution for me.
I pretty much have a show truck, and I need to use it for some hauling and stuff on occasion. This may sound foolish - but it is also foolish that it has only been driven about 1000 miles in the past 3-4 years. That is with a couple of ~350 mile road trips to car shows. Or, in other words - it sits in the garage way too dang much!

Does anyone know where I can get a carpet bedliner for a '71 GMC Fleetside SWB? I am not too worried about the price - but would like to have one of the good ones. I have e-mailed Bedrug, and hopefully will hear from them.

I just hope that someone here knows where I can find such. Thanks in advance!

Bowtiefreak · 07-12-2004, 09:38 AM

Yes,
Auto Custom Carpets sells a VERY nice and heavy duty one.
Their phone number is: 1-800-222-6287
I had one for my swb fleetside.
Apx. $375.00

Orange '71 GMC · 07-12-2004, 09:43 AM

Thanks very much Bowtiefreak! I sent you a PM!

I hope it is what I am looking for - I am trying to protect this:

Orange '71 GMC · 07-12-2004, 11:16 AM

Just for anyones reference - in case this ever gets searched...
All this is for the ACC BedRug.
They are $463.82 + Shipping.
The part number for me (1971 GMC F/S SWB) is 14162-71...should be common for all F/S models - probably just the last two digits change.

It is only available in dark grey and is water/acid/oil/gas/+++ resistant.
The backing is a molded foam backing that is non-scratch. The material also doesn't absorb water - so it doesn't allow rusting, etc.

highboy_04 · 07-12-2004, 11:49 AM

what did you do to your floor to get it to look like that?

Orange '71 GMC · 07-12-2004, 11:55 AM

Look like what?

It's a secret!

Actually...it's just an oversized piece of plate welded in there.

07-12-2004, 08:39 AM	#1
Orange '71 GMC Registered User Join Date: Jun 2003 Location: Northwest GA Posts: 132	Carpet Bedliners? This seems like the solution for me. I pretty much have a show truck, and I need to use it for some hauling and stuff on occasion. This may sound foolish - but it is also foolish that it has only been driven about 1000 miles in the past 3-4 years. That is with a couple of ~350 mile road trips to car shows. Or, in other words - it sits in the garage way too dang much! Does anyone know where I can get a carpet bedliner for a '71 GMC Fleetside SWB? I am not too worried about the price - but would like to have one of the good ones. I have e-mailed Bedrug, and hopefully will hear from them. I just hope that someone here knows where I can find such. Thanks in advance! __________________ Orange '71 GMC

07-12-2004, 09:38 AM	#2
Bowtiefreak Registered User Join Date: Jul 2003 Location: LeRoy, Mich. Posts: 854	Yes, Auto Custom Carpets sells a VERY nice and heavy duty one. Their phone number is: 1-800-222-6287 I had one for my swb fleetside. Apx. $375.00 __________________ 1968 Chevy C10 Short Fleetside/Wood floor ECE 4-6 Drop / 406 Small Block 1971 Chevelle 427 Big Block

07-12-2004, 09:43 AM	#3
Orange '71 GMC Registered User Join Date: Jun 2003 Location: Northwest GA Posts: 132	Thanks very much Bowtiefreak! I sent you a PM! I hope it is what I am looking for - I am trying to protect this: __________________ Orange '71 GMC

07-12-2004, 11:49 AM	#5
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	what did you do to your floor to get it to look like that? __________________ '67 c10 350/th350

07-12-2004, 11:55 AM	#6
Orange '71 GMC Registered User Join Date: Jun 2003 Location: Northwest GA Posts: 132	Look like what? It's a secret! Actually...it's just an oversized piece of plate welded in there. __________________ Orange '71 GMC

07-12-2004, 11:16 AM	#4
Orange '71 GMC Registered User Join Date: Jun 2003 Location: Northwest GA Posts: 132	Just for anyones reference - in case this ever gets searched... All this is for the ACC BedRug. They are $463.82 + Shipping. The part number for me (1971 GMC F/S SWB) is 14162-71...should be common for all F/S models - probably just the last two digits change. It is only available in dark grey and is water/acid/oil/gas/+++ resistant. The backing is a molded foam backing that is non-scratch. The material also doesn't absorb water - so it doesn't allow rusting, etc.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.