6" front springs & rear blocks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

btrailers · 07-17-2004, 07:42 PM

I have recently purchased a 79 3/4 ton chevy 4x4. It had a lift in it that I took out. I am trying to sell the lift and the truck. Have 6" springs out of the front and blocks and an overload spring from the rear. I do not have shocks, and I used the u-bolts. This lift has less than 500 miles on it. I would like to get 200 obo. Buyer pays shipping

soleeagle · 07-18-2004, 12:39 AM

Where are you located at? And what would shipping be to 46176?

rich-white · 07-18-2004, 01:45 PM

Would be interested in also. Need to know what shipping is to 63129 and where are you located? If close might pick up.

btrailers · 07-19-2004, 10:03 PM

I am located in north iowa zip code 50653. I will have to weigh the springs to know shipping exactly. Will try to get that done this week sometime

btrailers · 07-25-2004, 12:47 AM

The front springs weigh 50lbs each and are 48"long and about 10 tall I am guessing around 140lbs for everything. Will probly need to b shipped in two packages

rich-white · 07-25-2004, 11:05 AM

do you have the steering arm for the lift also or what all comes with the kit?

btrailers · 07-25-2004, 11:46 PM

You get the front springs and u-bolts and the rear blocks. I am using the back u-bolts but am planning on changing them too. I also left the overloads in the rear. Sorry no steering arm either. So I guess two blocks two springs and front u-bolts

07-17-2004, 07:42 PM	#1
btrailers Registered User Join Date: May 2004 Posts: 27	6" front springs & rear blocks I have recently purchased a 79 3/4 ton chevy 4x4. It had a lift in it that I took out. I am trying to sell the lift and the truck. Have 6" springs out of the front and blocks and an overload spring from the rear. I do not have shocks, and I used the u-bolts. This lift has less than 500 miles on it. I would like to get 200 obo. Buyer pays shipping

07-18-2004, 12:39 AM	#2
soleeagle Registered User Join Date: Sep 2003 Location: Shelbyville, Indiana Posts: 614	Where are you located at? And what would shipping be to 46176? __________________ Chuck '85 Chevy Silverado 4X4 '91 Chevy 4X4 Suburban http://www.cardomain.com/memberpage/545941

07-19-2004, 10:03 PM	#4
btrailers Registered User Join Date: May 2004 Posts: 27	Location I am located in north iowa zip code 50653. I will have to weigh the springs to know shipping exactly. Will try to get that done this week sometime

07-25-2004, 12:47 AM	#5
btrailers Registered User Join Date: May 2004 Posts: 27	weighed springs The front springs weigh 50lbs each and are 48"long and about 10 tall I am guessing around 140lbs for everything. Will probly need to b shipped in two packages

07-25-2004, 11:05 AM	#6
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	do you have the steering arm for the lift also or what all comes with the kit? Last edited by rich-white; 07-25-2004 at 11:05 AM. Reason: mispelled word

07-18-2004, 01:45 PM	#3
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Would be interested in also. Need to know what shipping is to 63129 and where are you located? If close might pick up.

07-25-2004, 11:46 PM	#7
btrailers Registered User Join Date: May 2004 Posts: 27	springs You get the front springs and u-bolts and the rear blocks. I am using the back u-bolts but am planning on changing them too. I also left the overloads in the rear. Sorry no steering arm either. So I guess two blocks two springs and front u-bolts

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.