Help, Front brake line clips - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jugernot · 07-22-2004, 12:44 PM

Does anyone have a pic of how the front brake lines are attached to the cross member? I want to order some new clips, but do not know which ones to order. I went to the Inline Tube web site, found replacements for the side frame rails, but I need to know which to order for the cross member.

Thanks

JimKshortstep4x4 · 07-22-2004, 12:59 PM

2 WD or 4WD?

Jim

jugernot · 07-22-2004, 01:24 PM

2wd

jugernot · 07-22-2004, 08:19 PM

Anyone have any pics or thoughts? Thanks

imdarren · 07-22-2004, 11:03 PM

Jug,
The ones on my 67 2wd front cross member have a sort of "re usable" rivet sort of thing going through the center of the clip.
When I get to that part of my restoration, I plan on just re using the old ones with a flat head screw through the center instead of that wierd rivet thing.
I'd consider getting a set of good used ones off the board.

Just my .02

If you know what the original ones look like, and are looking for a good aftermarket replacement, I have no idea what to use. Sorry

Darren

07-22-2004, 12:44 PM	#1
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Help, Front brake line clips Does anyone have a pic of how the front brake lines are attached to the cross member? I want to order some new clips, but do not know which ones to order. I went to the Inline Tube web site, found replacements for the side frame rails, but I need to know which to order for the cross member. Thanks __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

07-22-2004, 01:24 PM	#3
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	2wd __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

07-22-2004, 08:19 PM	#4
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Anyone have any pics or thoughts? Thanks __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

07-22-2004, 11:03 PM	#5
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	Jug, The ones on my 67 2wd front cross member have a sort of "re usable" rivet sort of thing going through the center of the clip. When I get to that part of my restoration, I plan on just re using the old ones with a flat head screw through the center instead of that wierd rivet thing. I'd consider getting a set of good used ones off the board. Just my .02 If you know what the original ones look like, and are looking for a good aftermarket replacement, I have no idea what to use. Sorry Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-22-2004, 12:59 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	2 WD or 4WD? Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.