Need help factory buckets in cab PIC's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

super72bb · 08-06-2004, 06:46 PM

Hi all,

My cab originally came with a bench seat, I have a set of original buckets to install in it. I was hoping to get a good clear picture of the underside of a cab that had factory bucket seats. The reason is... I want to see how the seat doublers in the floor looked from the factory. I would like to get an Idea of how they look before my bodyman makes a set. Any help on this would be great.

Thanks again
Curt

*Gee_Emm* · 08-06-2004, 06:49 PM

This is from my Jimmy but might be the same.

**D.PASSMORE** · 08-07-2004, 11:19 AM

Cabs that came with the bucket seat option on the sticker has a bracket that is mounted on the underside of the cab. There is a few smaller pieces that are tacked into spots where the seats bolt down. These are the factory brackets that were used for these type seats. I believe there is a aftermarket kit that is available to set the cab up for the switch from bench to buckets. The 67-68 bucket seat frame should bolt right into the bench seat mounting holes. Good Luck.

super72bb · 08-07-2004, 11:33 AM

Would anyone know where I could get such a kit?

**D.PASSMORE** · 08-09-2004, 07:38 AM

Try BROTHERS or the other part vendors that are listed on the home page of this board.

08-06-2004, 06:46 PM	#1
super72bb Senior Member Join Date: Jan 2002 Location: calgary,Alberta,Canada Posts: 387	Need help factory buckets in cab PIC's Hi all, My cab originally came with a bench seat, I have a set of original buckets to install in it. I was hoping to get a good clear picture of the underside of a cab that had factory bucket seats. The reason is... I want to see how the seat doublers in the floor looked from the factory. I would like to get an Idea of how they look before my bodyman makes a set. Any help on this would be great. Thanks again Curt __________________ 1972 CHEYENNE SUPER SWB BLACK. 402 BB, TH400, AIR, TILT, TACH, BUCKETS, CRUISE, AM/FM, 8 TRACK. My build thread: http://67-72chevytrucks.com/vboard/s...=1#post7120181

08-07-2004, 11:19 AM	#3
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	69-72 Bucket seats Cabs that came with the bucket seat option on the sticker has a bracket that is mounted on the underside of the cab. There is a few smaller pieces that are tacked into spots where the seats bolt down. These are the factory brackets that were used for these type seats. I believe there is a aftermarket kit that is available to set the cab up for the switch from bench to buckets. The 67-68 bucket seat frame should bolt right into the bench seat mounting holes. Good Luck. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

08-07-2004, 11:33 AM	#4
super72bb Senior Member Join Date: Jan 2002 Location: calgary,Alberta,Canada Posts: 387	Would anyone know where I could get such a kit? __________________ 1972 CHEYENNE SUPER SWB BLACK. 402 BB, TH400, AIR, TILT, TACH, BUCKETS, CRUISE, AM/FM, 8 TRACK. My build thread: http://67-72chevytrucks.com/vboard/s...=1#post7120181

08-09-2004, 07:38 AM	#5
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Kit Try BROTHERS or the other part vendors that are listed on the home page of this board.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-06-2004, 06:49 PM	#2
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	This is from my Jimmy but might be the same.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.