![]() |
![]() |
#1 |
Registered User
Join Date: Dec 2003
Location: Roanoke,Virginia
Posts: 179
|
Need an axle!!
Lh rear axle is trashed. I have access to a 74 axle and a 70 axle. Will either of these fit my 4x4 72? Both are from 4x4's. Also will an 88 power steering box from a 4x4 blazer fit a 72 4x4 blazer? Will it be variable ratio? Thanks, J=moodyholler
__________________
1998 WRANGLER I-6 auto 1972 LWB FLEETSIDE 1968 GMC SWB STEPSIDE 1994 C-1500 SWB 4.3 5 SPD |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Dec 2003
Location: Kingsport TN
Posts: 4,641
|
Feel like a road trip to TN I will have an extrta set of axles and a steering box. Let me know if I can help.
__________________
Earl 68 2500 4x4 GMC Burb |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Dec 2003
Location: Kingsport TN
Posts: 4,641
|
I almost for got they came of a 72 blazer
__________________
Earl 68 2500 4x4 GMC Burb |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
![]()
moodyhollar,
If the 74 rear end is a 12 bolt 4x4 rear end the axle will fit. The 70 could have the shorter axles in it . If you measure between the backing plates and the measurement is the same as on your Blazer then the axles will fit. Jim |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2003
Location: London, Ky.
Posts: 38
|
Earl87gta,
What gear ratio is it? If it's 3.73, I might be interested if the price is right. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2001
Location: Atlanta GA
Posts: 1,704
|
74 shafts will work. You might want to get the 74 front axle shafts as well. they ran a larger u-joint and are stronger.
Steering box is a bolt on. It will be a nice upgrade. It's variable close ratio. Be carefull that first turn so you dont flip the truck. ![]()
__________________
Grim-Reaper 70 Pontiac LeMans Sport Convertible, worlds longest resto in progress Looking for 71-72 2wd Blazer or Jimmy Project |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Dec 2003
Location: Roanoke,Virginia
Posts: 179
|
thanks all!!!
I got it back together a little while ago and just went out for a run. Freind of mine had a brand new axle from a 79 and I put tit in. Earl, will be down that way on Sat. the 21 if all goes well. Mine does have the small u-joints in the front now. Will try to salvage 74 model axles and lay them up for future use. Thanks again for all the help. moodyholler
__________________
1998 WRANGLER I-6 auto 1972 LWB FLEETSIDE 1968 GMC SWB STEPSIDE 1994 C-1500 SWB 4.3 5 SPD |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|