![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Nov 2001
Location: Corona,CA
Posts: 48
|
Air Cleaner Stove Pipe / Heat Riser question
Our '70 4x4 was very original when we got it. One owner and only 55,000 miles, but it did have headers. Now we're putting it back together with manifolds and trying to determine if it was supposed to have a "Stove Pipe"? From the looks of the air cleaner, it DID have one from the factory. The air cleaner has the large open fitting on the bottom of the snorkle for a pipe. Does anyone have pictures of the small block stove pipe setup? Does anyone have a stove pipe setup for sale? Could use any help I can get with this one too. Current pics of the truck are below:
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
Steve Flanders BROTHERS Toll Free 800-977-2767 Local Phone 951-808-9790 Email Steve@BrothersTrucks.com Last edited by Steve @ BROTHERS; 08-10-2004 at 07:55 PM. |
![]() |
![]() |
![]() |
#2 |
Account Suspended
Join Date: Jan 2000
Location: Woodstock, IL
Posts: 7,020
|
Is that the bad boy that the center link I got you is for?!? Man 'o' man that truck is gonna be sharp!!
![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Nov 2001
Location: Corona,CA
Posts: 48
|
Indeed it is
![]() Hey, Thanks again for going out of your way to get me that centerlink. It's at the powder coater now, hopefully it won't get lost like the last one.
__________________
Steve Flanders BROTHERS Toll Free 800-977-2767 Local Phone 951-808-9790 Email Steve@BrothersTrucks.com |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2000
Location: Victoria, BC, Canada
Posts: 2,410
|
Here is my stovepipe setup, sorry! its not for sale.
![]()
__________________
1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first. |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Apr 2001
Location: Amazonia, Mo. USA
Posts: 2,821
|
Steve, awesome truck.
What is the best technical source for the correct procedure on restoration of these trucks? I would like to know the step by step. Also how did you prep and finish your axles?
__________________
72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide |
![]() |
![]() |
![]() |
#6 | |
Account Suspended
Join Date: Jan 2000
Location: Woodstock, IL
Posts: 7,020
|
Quote:
I'm just glad it was the one you needed! |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Mar 2004
Location: Alabama
Posts: 705
|
Here's a link to one on ebay that Gee Emm posted.
Has a little more than you are looking for, but does not have the piece that fits around the exhaust manifold. http://cgi.ebay.com/ebaymotors/ws/eB...category=10076
__________________
1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s |
![]() |
![]() |
![]() |
#8 |
Southern Bowties
Join Date: Jan 2003
Location: Fort Worth, TX
Posts: 240
|
The 'base' plate mounts between the engine and ramhorn. The outer part that surrounds the ramhorn is mounted to the base plate with small screws. The lower end of the hot air pipe is attached to the top hole of the outer surround part with 2 screws. The top end of the hot air pipe goes into the snorkle.
__________________
1972 Cheyenne 350/350 |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
|
Two things:
I have my engine out and just detailed the pieces you want to see. The outside piece I painted with Eastwoods factory gray exhaust paint. The inside piece appears to be aluminum so I left it alone. I'll snap some shots tonight. The other thing I'd like to point out is that you have a rams horn style exhaust manifold on the LHS of the engine with the angle back dump. I'm pretty sure that all 4x4s had the rams horn style manifold that dumps straight down the middle. BOTH the manifolds I took off my working engine when I pulled it had a part number and "RH" in the casting. I'll take shots of them too for you.
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
![]() |
![]() |
![]() |
#10 | |
Registered User
![]() Join Date: Nov 2001
Location: Corona,CA
Posts: 48
|
Quote:
Man having those pictures of everyones Stove Pipes is really helpfull, thanks, keep 'em coming. As far as the angled dump on my LH manifold.... I had a straight dump on there first but took it off because it was way to tight against the enginge mount. After asking around a bit, it seemed nobody has a real clear answer on whether or not a 4x4 should have a straight or angled manifold, so I opted for the one that gave me some clearance. Since we're trying to do a spot on resto on this truck, I'm willing to change it if somebody can provide a reasonable amount of proof that it's supposed to be one-way-or-the-other.
__________________
Steve Flanders BROTHERS Toll Free 800-977-2767 Local Phone 951-808-9790 Email Steve@BrothersTrucks.com |
|
![]() |
![]() |
![]() |
#11 | |
Registered User
![]() Join Date: Nov 2001
Location: Corona,CA
Posts: 48
|
Quote:
nu2-72, The factory shop manual and assembly manual are real good resources when you're doing a restoration on your truck. This board is an awesome resource too. I wish there was a real good book written specifically for trucks with info on details like proper colors for components etc, but there's not. There are great books for Camaro, Chevelle, Corvette and such that are good on detail stuff, and most of the info correlates with trucks too. I've used them plenty of times to figure something out. One thing I do is take pictures and notes during disassembly so that I can use them to put things back the way they were when it comes time to reassemble. Take good pics of little things like clip colors & locations, hard lines & hose routing, wire routing and what types of fasteners are used. Any of the details you think will be important when you put it back together. I always try to determine the original color of components too. Make notes so you can put them back the way they're meant to be. That's some of what I do. I'm sure there's plenty of ideas floating around this board also. Like I said, this is an awesome resource right here.
__________________
Steve Flanders BROTHERS Toll Free 800-977-2767 Local Phone 951-808-9790 Email Steve@BrothersTrucks.com Last edited by Steve @ BROTHERS; 08-11-2004 at 11:32 AM. |
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Dec 2000
Location: Greeneville, TN
Posts: 3,095
|
Steve, as far as I can tell, I have nothing in writing, just experience. All 4wd's were striaght down dump on both sides. I have parted many and had alot of 4wds. Also if you go back to the straight down, the stove is a little different on the bottom on the straight dumps. I don't believe I have any right now I will double check. I may have the pipe.
Bill
__________________
atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed |
![]() |
![]() |
![]() |
#13 | |
Registered User
![]() Join Date: Nov 2001
Location: Corona,CA
Posts: 48
|
Quote:
Experience works for me ![]()
__________________
Steve Flanders BROTHERS Toll Free 800-977-2767 Local Phone 951-808-9790 Email Steve@BrothersTrucks.com |
|
![]() |
![]() |
![]() |
#14 |
71 DELUX
Join Date: Sep 2003
Location: Northern CA / Sac
Posts: 1,056
|
pipe
Steve,
I have a pipe, but not the stove part that surrounds the manifold. I am sure that you probably already have the air cleaner assembly... so I am not sure if what I have would be worth your time. I was not going to sell it, but maybe we could work out some sort of trade if you've not found anything yet? ![]() I'll check my stash of parts to see if maybe I have the stove assembly. Jeff
__________________
5/4 drop LWB wood bed - 15x8 front 235/60 - 15x10 rear 295/50 2003 FORD Escape 1998 Honda VTR1000 |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Dec 2000
Location: Greeneville, TN
Posts: 3,095
|
Steve, I will check when I get home tonight or in the morning, and give you a call tomorrow. I have been thinking and I may have it all if it is still there.
Bill
__________________
atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed |
![]() |
![]() |
![]() |
#16 |
Registered User
![]() Join Date: Nov 2001
Location: Corona,CA
Posts: 48
|
Bill,
I'll keep my fingers crossed that you have an entire setup. Just let me or JC know. From the sounds of it, I'm gonna need a LHS exhaust manifold too. Can't use the one I have here because it has an alternator bracket cast into it. I'll wait to hear back from you, Thanks.
__________________
Steve Flanders BROTHERS Toll Free 800-977-2767 Local Phone 951-808-9790 Email Steve@BrothersTrucks.com |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
|
Here are the pictures of the stove pipe I promised. Since my engine guy is a month late I have had lots of time to paint things.
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
|
OK. I'll try it again...
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
|
Here are my exhaust manifolds. This truck was NOT stock when I got it. However one of the parts house catalogs I looked at indicated the LH and RH manifolds are the same. Mine appear to be the same but one has a "61" and one has a "62" in the casting. The part numbers and the "RH" cast in appear to be the same.
Another data point. I ordered the LMC dual exhaust kit a couple of years ago. It bolted up to my "stock" manifolds with NO monkey business.
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
![]() |
![]() |
![]() |
#20 |
Registered User
![]() Join Date: Nov 2001
Location: Corona,CA
Posts: 48
|
Perfect pictures and info, thanks mrein3.
__________________
Steve Flanders BROTHERS Toll Free 800-977-2767 Local Phone 951-808-9790 Email Steve@BrothersTrucks.com |
![]() |
![]() |
![]() |
#21 |
Registered User
![]() Join Date: Dec 2002
Location: Northern Virginia
Posts: 1,269
|
The straight dump manifolds are there because on the passenger side the exhaust has to travel between the transfer case and the frame a tight hole- would take some bending without the straight dump
|
![]() |
![]() |
![]() |
#22 | |
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
|
Quote:
Thanks again. This board is the best! Matt
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
|
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Dec 2000
Location: Greeneville, TN
Posts: 3,095
|
Steve, here is some pictures of the only one I have. Someone had put a piece of flex pipe on it and that would need some attention. I don't think it would be that big of a deal to fix. The rest of the stove and manifold and pipe are in good condition. If interested let me know.
Bill
__________________
atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
|
One more picture if you're still paying attention to this thread.
This was taken before I started pulling stuff. It isn't real clear but it shows the heat exchanger deal installed and also shows how close the center dump rams horn come to the engine mount. I left it large... ...I hope the file size is small enough. It is hard to believe those are the same parts pictured above before I applied a little elbow grease and paint.
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
![]() |
![]() |
![]() |
#25 |
Registered User
![]() Join Date: Nov 2001
Location: Corona,CA
Posts: 48
|
Thanks to everyone here for the info, pictures and parts. I've managed to locate all the parts necessary to put the Exhaust Manifold and Stove Pipe assy together. Thanks to those of you who have offered or are sending parts for this project.
I will be sure to post pictures of the Stove Pipe assy here once we have it together. More pics of the truck to come also as progress continues. ![]() Actually, I'm going to need a set of spark plug heat shields too, contact me if anyone has a spare set.
__________________
Steve Flanders BROTHERS Toll Free 800-977-2767 Local Phone 951-808-9790 Email Steve@BrothersTrucks.com Last edited by Steve @ BROTHERS; 08-12-2004 at 11:38 PM. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|