NEED to sale parting out 1991

[dapolice1]

Hey guys and gals.
I bought a 1991 Chevy Silverado Near Oklahoma City. I am bringing it back to Austin, TX. through Dallas. I am Laying over in Dallas for a day or two to do some work on it.
I would like to sale the Dash minus cluster, the front and rear seats(it is an extended cab with 60/40 red in color), The front clip is in good shape and is for sale as well as the inner fenders and radiator support. I will have the rear leaf springs and shackles as well. I Have the fuel tank complete with pump and sender...
Anything else you need let me know.. I am trying to unload this stuff before I get home. Make me a reasonable offer and I KNOW we can make a deal.. I would rather sale it sheap than it come back to the house.

I am making this trip the first week of September. The cluster, hangers, and doors are spoken for, but let me know what you have and need. I need 99-200 escalade inner and outter fenders, 99-2000 escalade radiator support, a complete 95-98 chevy truck harness with power locks windows and mirrors, 95-96 ABS Module, and 95-98 bucket seats (it does not matter about the fabric, but foam must be in perfect shape and must be power).

Let me know what you need and mak an offer. I will post pics here of the truck. The front bumper is fine just has a tweaked mount. The GRille is not effected by the bumper.

I am doing a complete frame off on this truck with an LS1, and air bags. I have a custom bed and most of the escalade front clip, so I will not need the stock parts. These parts really need to be sold by on a meeting basis cause they are too large and bulky to ship. I am telling you guys if you need stuff no is the time to speek.... You will be amazed at the deals to be had on this stuff.
No Reasonable Offers Refused!!

[dapolice1]

more pics of truck parts:

[69ssnova]

how much for seats and door panel

[dapolice1]

The front seats are $100 and the rear are $50.. That is if you meet me and pick them up in OKlahoma or Dallas.

[99-2door]

The radiator support that is on that truck will work for the escalade fenders. The Escalade support is the same as ck1500/Tahoe support.

Also, I have a set of buckets from a 98 Tahoe. They are leather, both power with heated function. The leather covers need replaced, but the seats are nice otherwise. $150

[dapolice1]

Originally Posted by 99-2door

The radiator support that is on that truck will work for the escalade fenders. The Escalade support is the same as ck1500/Tahoe support.

Also, I have a set of buckets from a 98 Tahoe. They are leather, both power with heated function. The leather covers need replaced, but the seats are nice otherwise. $150

Ya I know the radiator supports are the same. I am replacing EVERYTHING on the truck with new parts. New suspension, well air bags 4 link control arms custom tie rods, custom bed, suicide doors, I might as well go with a new rad support cause all the other front clip is new.

I want the seats. How far are you from OKlahoma City? You have pictures of them? Both have power tracks? Do they allow rear entry into the extended cab? I doubt it but anything I have you need?

[wwhijr]

How much for the light sockets on the rear drivers side taillight. ( providing yours are still good)

[99-2door]

Originally Posted by dapolice1

I want the seats. How far are you from OKlahoma City? You have pictures of them? Both have power tracks? Do they allow rear entry into the extended cab? I doubt it but anything I have you need?

Both sides have power tracks. Power seats fold forward but they don't slide farther forward. These are the best seats you can get, 6-way power on both sides plus heated on both sides.
I am in Southeast OK 74728, about 2.5 hours from OKC and 2.5 from DFW. I will be in OKC the weekend of the 28th.
I can get some pics tonight.

[ahab2]

How much for the bed?

[dapolice1]

Originally Posted by 99-2door

Both sides have power tracks. Power seats fold forward but they don't slide farther forward. These are the best seats you can get, 6-way power on both sides plus heated on both sides.
I am in Southeast OK 74728, about 2.5 hours from OKC and 2.5 from DFW. I will be in OKC the weekend of the 28th.
I can get some pics tonight.

I wnat them. So you have the vehicle side of the harness as well? Or even better the truck harness for them? I am installing the 95 harness in the truck and they should plug in. I will be in OK city like the 2nd or 3rd of Sept.
Guess I can come by and get them.

Originally Posted by ahab2

How much for the bed?

Bed is not for sale it is going on my 1992 sorry.

[dapolice1]

Originally Posted by wwhijr

How much for the light sockets on the rear drivers side taillight. ( providing yours are still good)

Doesent the rear harness plug into the frame harness at the rear of the frame?
I need to crawl under mine and look. $20 for the entire rear harness if we meet otherwise plus shipping.

[79BIG10]

How about the steering wheel and what tranny?

[73stepside]

if 69novass passes on the front seat i may be able to get it from you

[99-2door]

Originally Posted by dapolice1

I wnat them. So you have the vehicle side of the harness as well? Or even better the truck harness for them? I am installing the 95 harness in the truck and they should plug in. I will be in OK city like the 2nd or 3rd of Sept.
Guess I can come by and get them.

The seats plugged directly into the body harness on that Tahoe. Should be no problem to wire them up though.
If I know a little bit ahead of time, I might be able to meet you somewhere and cut a little time off your trip.
here are a couple of pics of the seats:

[SanitysBane]

what about the pedals?

[dapolice1]

Originally Posted by 73stepside

if 69novass passes on the front seat i may be able to get it from you

69NovaSS has not gotten back to me. If you confirm you want them lets do it. They are yours $100 for the front set, you need the back?

Originally Posted by 99-2door

The seats plugged directly into the body harness on that Tahoe. Should be no problem to wire them up though.
If I know a little bit ahead of time, I might be able to meet you somewhere and cut a little time off your trip.
here are a couple of pics of the seats:

I want the seats. I am actually going to Okarche, OK 73762.
I can paypal you for the seats if you can drop them off on the way to OK CITY. he said it was close..
Or I am coming Highway 81 north out of Bowie Texas, North of Fort Worth.
If I can put you in touch with the guy with the truck you wanna run the seats by there if they are close enough to you or your trip to OK city?

Do you have a body harness for a 96 or later truck?
Do you have the 4wheel abs module from a 95-96? I need one that my 95 harness will plug into. I am getting all new brake lines, so I can fab up what I need. Let me know if you have these items and a price. If your on EBAY I have bought from you before. Actually I think I bought a 92 Ebrake pedal Assembly from you.

Originally Posted by 79BIG10

How about the steering wheel and what tranny

Sorry but there is not a tranny. The steering wheel needs to stay on the truck till I get it back. I will sale the entire manual Column though out of my 1992, put the auto column from the 91 pictured in my 92 if you on my route it is $100. I can put the 95 in the 91 to move it around till I do the interrior. If your not on my route I can sale you the manual one for the $100 plus shipping in about 4 weeks. I must know if you will need this on the trip so I can bring the 95 with me.

Just let me know.

[dapolice1]

Originally Posted by SanitysBane

what about the pedals?

Sorry gotta keep the pedals.
You mean the add on pedals?
I am coming to Beaumont before the trip and after if you want the add on pedals.
I have to keep the actual GM pedal assemblies. Make me an offer on the add ons.

[SanitysBane]

pm sent!

[bagged91]

I have a set of nice inner fenderwells but it's a shame your so far away. Shipping would be a biotch... The fenderwells & core support are the same as the C/K pu...

Now, question 4 you.... Why do you need innerfenderwells if you are baggin' it????? If you plan on running any kind of big rim on it, you are gonna rub like a mo'fo when you drag it.......

I have a 99-00 GMC Denali grille in decent shape(has small crack inside behind parking light)but shipping will kill(oversized). Had a nice set of Caddy fenders that were attached to the above mentioned fenderwells but they're gone now.....

Good luck!

[dapolice1]

Originally Posted by bagged91

I have a set of nice inner fenderwells but it's a shame your so far away. Shipping would be a biotch... The fenderwells & core support are the same as the C/K pu...

Now, question 4 you.... Why do you need innerfenderwells if you are baggin' it????? If you plan on running any kind of big rim on it, you are gonna rub like a mo'fo when you drag it.......

I have a 99-00 GMC Denali grille in decent shape(has small crack inside behind parking light)but shipping will kill(oversized). Had a nice set of Caddy fenders that were attached to the above mentioned fenderwells but they're gone now.....

Good luck!

Well I am going to modify the NEW factory innerfenders to accomodate the larger tires. But I want them as a base to construct the new ones. The trailer fenders are not my thing and I need an inner fender. I am going to customize the factory units to get what I want. I am very aware of the clearence issues involved, but thanks for the info.
What are you asking on the Grille Shell? I already have the caddy one with caddy grille, but never know when you might need an extra.

[bagged91]

I would need to get 100 for the shell plus shipping(that's what I paid for it...). It is uncut with the red GMC emblems still on it... Somewhere I have an extra headlight but I don't remember which side it fits. It has one broken mounting hole on bottom...

R U gonna bodydrop it? Looks like a pretty decent truck to start off with. I never ended up using fenderwells in mine. I drive it every day and the motor stays fairly clean(surprisingly) but the firewall does get a little messy if I don't keep up with it..

Good Luck!!!
Joe

[337]

I'm interested in the gray instrument bezel if its not cracked.
I'm in San Antonio and am willing to wait and meet somewhere if the price is right and the bezel is good. sent pm

[dapolice1]

replying to Pm now..

[337]

if you got a good fuse box cover, i'd be interested in that also. Thanks for the reply.

[dapolice1]

Originally Posted by 337

if you got a good fuse box cover, i'd be interested in that also. Thanks for the reply.

The one I think I have is spoken for already. I'll see if I have another.