Stuff for sale from the '78. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bluex · 08-21-2004, 07:18 AM

Stock air cleaner, worked great took it off looong ago for a chrome one. $30 + ride.

.040 over silv-o-lite pistons part number: 8-1436 also included a set of rods I will send (9) b/c one maybe bad where I lost the exhaust vavle on that cylinder. I was going to use them with my rebuild but had to go .060. $150 + ride.

TH-350, somewhere around 50k on it. No problems went with a 700. Includes converter, dipstick, kickdown cable and vac mod line. $125 + ride.

8' bed '78 model. Needs the floor replaced, great bed for a daily as the rust is only in the floor. Includes repop tailgate, lights with harness, gas tank and filler neck. $75 you come and get it.

I have more but I cant remember it all, I will post more later. All stuff is up for best reasonable offer too.

Thanks
Paul

beaterC10 · 08-21-2004, 09:53 AM

Do you have a good fan shroud?

Blue_71 · 08-21-2004, 12:14 PM

what size engine are the pistons for? 350? what kind of rods? flat tops?

bluex · 08-22-2004, 12:45 AM

Quote:

Originally Posted by Blue_71

what size engine are the pistons for? 350? what kind of rods? flat tops?

Yes they are for a 350 as I was going to use them on mine. They are flat tops with four valve reliefs. I was thinking I put all that on there, but I guess I got ahead of myself. The rods are the stock ones out of the motor. It was a reman from NAPA that got around 40k on it when the keeper on the #4 exhaust valve broke and it and the piston had a very expensive talk. I can get pics of them if you would like.

beater--no shrouds, sorry.

Thanks
Paul

I would also be interesed in a swap on any of the stuff for a complete window channel seal set and on the cab weatherstriping.

bluex · 08-23-2004, 06:02 AM

ttt

The tranny is a 9" tailshaft, I have pics of it too.

bluex · 08-31-2004, 02:02 AM

BUMP, Make an offer on any of it, it HAS to go!!

benscool1 · 09-08-2004, 12:36 AM

any pics of the bed?

bluex · 09-08-2004, 03:02 PM

Yes, quite a few look here:

http://s91879901.onlinehome.us/gallery/Paulstruck

Most of that junk that was in there is now gone, it was kinda a storage for all the parts I was using during the swap.

rich-white · 09-11-2004, 11:04 AM

beater c 10 check your pm

08-21-2004, 07:18 AM	#1
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	Stuff for sale from the '78. Stock air cleaner, worked great took it off looong ago for a chrome one. $30 + ride. .040 over silv-o-lite pistons part number: 8-1436 also included a set of rods I will send (9) b/c one maybe bad where I lost the exhaust vavle on that cylinder. I was going to use them with my rebuild but had to go .060. $150 + ride. TH-350, somewhere around 50k on it. No problems went with a 700. Includes converter, dipstick, kickdown cable and vac mod line. $125 + ride. 8' bed '78 model. Needs the floor replaced, great bed for a daily as the rust is only in the floor. Includes repop tailgate, lights with harness, gas tank and filler neck. $75 you come and get it. I have more but I cant remember it all, I will post more later. All stuff is up for best reasonable offer too. Thanks Paul __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

08-23-2004, 06:02 AM	#5
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	ttt The tranny is a 9" tailshaft, I have pics of it too. __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

08-31-2004, 02:02 AM	#6
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	BUMP, Make an offer on any of it, it HAS to go!! __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

09-08-2004, 12:36 AM	#7
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	any pics of the bed? __________________ Ben 84 C10 Silverado 14 Silverado Z71

09-08-2004, 03:02 PM	#8
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	Yes, quite a few look here: http://s91879901.onlinehome.us/gallery/Paulstruck Most of that junk that was in there is now gone, it was kinda a storage for all the parts I was using during the swap. __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

08-21-2004, 09:53 AM	#2
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	Do you have a good fan shroud?

09-11-2004, 11:04 AM	#9
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	beater c 10 check your pm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.