Wanted: 350 small block - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**smokinn** · 08-28-2004, 04:46 PM

Looking for a 350 sb for a 80 chevy short box 4x4 automatic. Low miles and in great shape.

Thanks
Jason

crews · 08-29-2004, 02:15 AM

I've got a late model that needs a rebuild if you want to go that route.

Grande Rojo · 08-29-2004, 10:52 AM

I've got a 350 for sale
350 .030 over
flat top cast pistons 10.1 comp
Vortec heads modified for more lift (cut guides, bigger springs, pinned studs)
balanced bottom end, cast crank and resized rods w/ARP bolts
Clevite Main and Rod bearings
Edelbrock Air gap intake
clevite cam 231@.50 480 lift with 1.5 rockers
did not have it dynoed but should make about 375-400hp

complete intake to oil pan 2000 miles here it run
$1600

Located Southwest MO.

cochran63 · 08-29-2004, 11:09 PM

I have an 84 3/4 ton with a 4.10 rearend, 4 speed, cold air, and a new (rebuilt motor) and a new clutch. The motor has less than 1500 miles on it. Im asking 1750 for it.

Ryan Flowers · 08-30-2004, 08:35 PM

I have a 350 small block out of a 1990 GMC Suburban. The only thing wrong with it is a blown head gasket. I was already building the 383 stroker when it blew so I didn't bother to change it. Make me an offer.

08-28-2004, 04:46 PM	#1
smokinn Senior Member Join Date: Aug 2002 Location: omaha,Ne Posts: 617	Wanted: 350 small block Looking for a 350 sb for a 80 chevy short box 4x4 automatic. Low miles and in great shape. Thanks Jason

08-29-2004, 02:15 AM	#2
crews It just doesn't matter Join Date: Apr 2001 Location: Huntington Beach, Ca Posts: 1,660	I've got a late model that needs a rebuild if you want to go that route. __________________ 05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!!

08-29-2004, 10:52 AM	#3
Grande Rojo paper or plastic? Join Date: Nov 2002 Location: SW Missouri Posts: 671	I've got a 350 for sale 350 .030 over flat top cast pistons 10.1 comp Vortec heads modified for more lift (cut guides, bigger springs, pinned studs) balanced bottom end, cast crank and resized rods w/ARP bolts Clevite Main and Rod bearings Edelbrock Air gap intake clevite cam 231@.50 480 lift with 1.5 rockers did not have it dynoed but should make about 375-400hp complete intake to oil pan 2000 miles here it run $1600 Located Southwest MO. __________________ 1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388 Last edited by Grande Rojo; 08-29-2004 at 11:06 AM.

08-29-2004, 11:09 PM	#4
cochran63 Registered User Join Date: Jan 2004 Location: Oklahoma Posts: 1,057	I have an 84 3/4 ton with a 4.10 rearend, 4 speed, cold air, and a new (rebuilt motor) and a new clutch. The motor has less than 1500 miles on it. Im asking 1750 for it. __________________ Youth soon passes away, but immaturity can last a life time.

08-30-2004, 08:35 PM	#5
Ryan Flowers No Brakes Club Join Date: Jan 2003 Location: Carthage, N.C. Posts: 263	I have a 350 small block out of a 1990 GMC Suburban. The only thing wrong with it is a blown head gasket. I was already building the 383 stroker when it blew so I didn't bother to change it. Make me an offer. __________________ Ryan Flowers 85 GMC Suburban 4x4 379 90 GMC Suburban 4x4 383 01 Chevy Suburban 2x4 350 Click here to email me Click here to visit my web site

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.