Parting 72 4x4 Blazer Chassis and Tub - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ljbear · 09-01-2004, 12:26 AM

Not much left on the rest of the Blazer. All chassis brackets and cross members are there except the Transmission x-member. Spring perches, motor cradle, body mounts are all there. Let me know what you need. On the tub the windshield frame is gone, bedsides are mine, and I think the front floor section is spoken for. Rear bed section is in great shape, good rocker boxes. If you're on the West Coast, LA to Tacoma I think I can get the bigger stuff a ride around the 11th of September.

69ssnova · 09-01-2004, 09:35 AM

how much for the upper motor mounts thanks greg

ljbear · 09-01-2004, 09:53 AM

Not sure what you're asking Greg. This has a cradle that doubles as a crossmember, 3 pieces that bolt together. Are you after just the top wings of the cradle? If so I'd rather not split it up that way, sorry.

**JIMs70GMC** · 09-01-2004, 10:26 AM

Larry, Can you post a pic of the front spring hangers for the rear springs. I understand theirs a difference between the 69-70 and 71-72 4wds. Thanks.

bigbluthng · 09-01-2004, 11:02 AM

what are you asking for on the chassis?

ljbear · 09-01-2004, 02:35 PM

Jim here's the front perch on the rear.
bigbluthng, left rail has a twist, right at the rear perch for the front spring, fixable, up to you.

teeitup · 09-01-2004, 04:58 PM

Larry, does it have the chrome rear carpet hold downs in it? Thanks Randy

**JIMs70GMC** · 09-01-2004, 09:01 PM

If you cut it up I'll take those (front spring braket for rear springs both sides including piece that attaches to bottom of frame). Should be 6 rivits total each side.

*Gee_Emm* · 09-01-2004, 10:42 PM

Do you have the area circled in red from the rocker boxes. If you do and they are in good shape one of the vendors from this site might want to buy them so they can get them shipped off to get reproed.

ljbear · 09-02-2004, 01:55 PM

Randy, Chrome is bad and the piece itself is pretty wavy.
Jim, I've got one ahead of you, I'll see if he's buying or kicking tires.
GM, they should be good, the rest is very solid so I'd expect as much.

**JIMs70GMC** · 09-06-2004, 12:02 AM

Larry, let me know. Thanks!

ljbear · 09-19-2004, 07:19 PM

Jim looks like you're up on the perches, let me know if you're interested.

**GMCPaul** · 02-02-2005, 11:53 PM

ljbear I would be interested in purchasing the outer rocker box end caps that are circled in Gee_Eem's picture. If they are in good condition get me a price on them with shipping to
GMCPauls Truck Parts
8778 E. Old 36 Road
Rockville, IN 47872
You can reach me at
robbinspd1199@yahoo.com
or phone
765-344-2906 M-F 9am-5pm EST, ask for Les and let him know total and how and where to sends money if they are available.
We would like to get these reproduced and need at least 1 in good condition for the tooling to be made from, its important that they not be damaged or bent.
Thanks for any help you can provide!!!
GMCPaul

ljbear · 02-03-2005, 01:33 AM

Sorry Paul, that tub is all spoken for and long gone.

**JIMs70GMC** · 02-03-2005, 06:18 AM

Does it still have the rad core support/front spring bracket and the front spring rear brackets?

ljbear · 02-03-2005, 11:16 AM

Jim those are gone also. There's one more truck that may have a date with "Ol Sparky" aka the plasma cutter. If it goes that route I could get you the front mounts.

blaznorange · 02-03-2005, 08:33 PM

Would you happen to have the front bumper brackets? Price?
Thanks
Adam

ljbear · 02-03-2005, 08:41 PM

Quote:

Originally Posted by blaznorange

Would you happen to have the front bumper brackets? Price?
Thanks
Adam

I have a set from a 1970 4wd, just the diagonals, not the small "L" shaped that mounts on the top of the frame rail. They are straight and have been bead blasted. $20 + shipping, 7lbs 20"x4"x4" FedEx from 95945

blaznorange · 02-03-2005, 09:45 PM

That is what I need, the outer support, but all catalogs I have list 70 different then 72. Thanks anyway.

Adam

ljbear · 02-03-2005, 10:06 PM

You are correct and saved me some grief. I'm using a 68 front clip so I need the 70's. I do have a set of 71/72 that I had set aside if you're interested.

blaznorange · 02-03-2005, 11:09 PM

what are you asking for them and shipping to 56557? Would you happen to have pictures?

Adam

ljbear · 02-03-2005, 11:53 PM

Same as the others, $20. FedEx ground is $10. No pictures, they're straight and a little dirty. I'll blast them before I ship them. Let me know

blaznorange · 02-04-2005, 12:19 AM

Sent you a pm

09-01-2004, 12:26 AM	#1
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Parting 72 4x4 Blazer Chassis and Tub Not much left on the rest of the Blazer. All chassis brackets and cross members are there except the Transmission x-member. Spring perches, motor cradle, body mounts are all there. Let me know what you need. On the tub the windshield frame is gone, bedsides are mine, and I think the front floor section is spoken for. Rear bed section is in great shape, good rocker boxes. If you're on the West Coast, LA to Tacoma I think I can get the bigger stuff a ride around the 11th of September. __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

09-01-2004, 09:35 AM	#2
69ssnova Registered User Join Date: Dec 2002 Location: rock hill sc Posts: 69	motor mounts how much for the upper motor mounts thanks greg

09-01-2004, 09:53 AM	#3
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Not sure what you're asking Greg. This has a cradle that doubles as a crossmember, 3 pieces that bolt together. Are you after just the top wings of the cradle? If so I'd rather not split it up that way, sorry. __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

09-01-2004, 10:26 AM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Larry, Can you post a pic of the front spring hangers for the rear springs. I understand theirs a difference between the 69-70 and 71-72 4wds. Thanks. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

09-01-2004, 11:02 AM	#5
bigbluthng Registered User Join Date: Aug 2003 Location: canyon country, ca, USA Posts: 336	what are you asking for on the chassis? __________________

09-01-2004, 02:35 PM	#6
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Jim here's the front perch on the rear. bigbluthng, left rail has a twist, right at the rear perch for the front spring, fixable, up to you. Attached Images __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

09-01-2004, 04:58 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Larry, does it have the chrome rear carpet hold downs in it? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-01-2004, 09:01 PM	#8
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	If you cut it up I'll take those (front spring braket for rear springs both sides including piece that attaches to bottom of frame). Should be 6 rivits total each side. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

09-01-2004, 10:42 PM	#9
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Do you have the area circled in red from the rocker boxes. If you do and they are in good shape one of the vendors from this site might want to buy them so they can get them shipped off to get reproed.

09-02-2004, 01:55 PM	#10
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Randy, Chrome is bad and the piece itself is pretty wavy. Jim, I've got one ahead of you, I'll see if he's buying or kicking tires. GM, they should be good, the rest is very solid so I'd expect as much. __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

09-06-2004, 12:02 AM	#11
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Larry, let me know. Thanks! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

09-19-2004, 07:19 PM	#12
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Jim looks like you're up on the perches, let me know if you're interested. __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

02-02-2005, 11:53 PM	#13
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,721	ljbear I would be interested in purchasing the outer rocker box end caps that are circled in Gee_Eem's picture. If they are in good condition get me a price on them with shipping to GMCPauls Truck Parts 8778 E. Old 36 Road Rockville, IN 47872 You can reach me at robbinspd1199@yahoo.com or phone 765-344-2906 M-F 9am-5pm EST, ask for Les and let him know total and how and where to sends money if they are available. We would like to get these reproduced and need at least 1 in good condition for the tooling to be made from, its important that they not be damaged or bent. Thanks for any help you can provide!!! GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

02-03-2005, 01:33 AM	#14
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Sorry Paul, that tub is all spoken for and long gone. __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

02-03-2005, 06:18 AM	#15
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Does it still have the rad core support/front spring bracket and the front spring rear brackets? __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm



Register or Log In To remove these advertisements.

02-03-2005, 11:16 AM	#16
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Jim those are gone also. There's one more truck that may have a date with "Ol Sparky" aka the plasma cutter. If it goes that route I could get you the front mounts. __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

02-03-2005, 08:33 PM	#17
blaznorange Registered User Join Date: Jan 2002 Location: Mahnomen, MN Posts: 29	bumper brackets Would you happen to have the front bumper brackets? Price? Thanks Adam

02-03-2005, 09:45 PM	#19
blaznorange Registered User Join Date: Jan 2002 Location: Mahnomen, MN Posts: 29	That is what I need, the outer support, but all catalogs I have list 70 different then 72. Thanks anyway. Adam

02-03-2005, 10:06 PM	#20
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	You are correct and saved me some grief. I'm using a 68 front clip so I need the 70's. I do have a set of 71/72 that I had set aside if you're interested. __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

02-03-2005, 11:09 PM	#21
blaznorange Registered User Join Date: Jan 2002 Location: Mahnomen, MN Posts: 29	what are you asking for them and shipping to 56557? Would you happen to have pictures? Adam

02-03-2005, 11:53 PM	#22
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Same as the others, $20. FedEx ground is $10. No pictures, they're straight and a little dirty. I'll blast them before I ship them. Let me know __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

02-04-2005, 12:19 AM	#23
blaznorange Registered User Join Date: Jan 2002 Location: Mahnomen, MN Posts: 29	Sent you a pm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.