The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-08-2004, 01:29 PM   #1
Brently
Registered User
 
Join Date: Feb 2002
Location: Chattanooga
Posts: 151
will big block coils help to raise my truck? can you help?

will big block coils help to raise the front end of my truck about 1-2 inches? if so where can i get some? is there anyone who has some used? thanks for the info . Brent
Brently is offline   Reply With Quote
Old 09-08-2004, 10:49 PM   #2
Brently
Registered User
 
Join Date: Feb 2002
Location: Chattanooga
Posts: 151
coils

help?
Brently is offline   Reply With Quote
Old 09-08-2004, 11:03 PM   #3
krazy_texan
Registered User
 
krazy_texan's Avatar
 
Join Date: Oct 2002
Location: West Des Moines, Ia
Posts: 3,233
i a pretty sure that they will, somebody once told me to find some out of a suburban or other reallyheavy vehicles like that, that had big blocks in them.
__________________
Krazy Texan
My Trucks are made with Wrenches not Chop Sticks
1967 GMC 3/4 ton "Johnny Cash"
1990 v1500 suburban
1967 Ford f100 Swb 4x4 "green bean"


GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO
krazy_texan is offline   Reply With Quote
Old 09-08-2004, 11:43 PM   #4
farfromhome
Registered User
 
Join Date: Mar 2003
Location: Maryland
Posts: 36
I put them in my truck. They didn't give the height I wanted,I was hoping for a level stance and no rake in the front.Better than the stock springs a little more height but a little stiffer too. I have 3/4 ton coils in the rear and the rear sits about an inch and a half higher than the front. You could get those coil spring spacers that sit on top of the coils to get an extra inch or two,Ive seen them in some catalogs but don't know how safe or reliable they would be.
farfromhome is offline   Reply With Quote
Old 09-09-2004, 12:15 AM   #5
binford
Registered User
 
Join Date: Aug 2004
Location: Sacramento Ca
Posts: 126
They made 3 different coils. C10, C20, c30 If you have a C10, then the C20 are marked as heavyduty or BB. Ebay currently has a pair for a starting bid of $1.00 not sure if they are what you need.
binford is offline   Reply With Quote
Old 09-09-2004, 12:21 AM   #6
binford
Registered User
 
Join Date: Aug 2004
Location: Sacramento Ca
Posts: 126
I put some 3/4 ton springs on my 68 C10 and it did raise the front end about an 1-2 inches. I have 16" tires and have about 4 fingers from the top of the tire to the fender. I decided to get new springs for my 71 C20, but am now having problems get the correct ones. I going for the C30 1 ton springs looking to buy the ones on www.rockauto.com
binford is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:10 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com