column shift linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RODSBYT · 09-09-2004, 12:00 AM

Has anyone installed straight rod linkage on their column shift like from
kugal or lokar? to eliminate braket from frame.
I need to to clear custom exhaust system.
71 short bed 406 with turbo 350.
any pictures would be big help.
thanks.

Tx Firefighter · 09-09-2004, 07:08 AM

Several guys here have used the Lokar kit with great results. It's usually cheaper than trying to chase down all of the factory bits.

drink2mny · 09-09-2004, 08:23 AM

I have the lokar rod on mine. had to clear big headers.

If I were to do it again I heard lokar now has a cable style that connects nicer.
I think this is it.

RODSBYT · 09-09-2004, 05:42 PM

Drink2mny thank for the picture. that is a very nice setup .

**guyryan100** · 10-05-2004, 02:58 PM

anybody know where to find that Lokar cable-driven piece? Jegs and Summit only seem to offer the rod edition....

stickshift_or_walk · 10-05-2004, 03:20 PM

Quote:

Originally Posted by guyryan100

Jegs and Summit only seem to offer the rod edition....

Call 'em. They can't put it all in the catalogs.

SSOW

Tx Firefighter · 10-05-2004, 04:21 PM

Summit has it in stock and ready to ship today.

Part number is LOK-ACA-1804

You have to go to the manufacturers page and get the part number then see if Summit has it by checking for the part number specifically. They do have it in stock.

**guyryan100** · 10-05-2004, 04:33 PM

Well, that makes it easy. Thanks, Tx.

--Ryan

Longhorn Man · 10-05-2004, 05:29 PM

Woah!

Quote:

From www.summitracing.com . P/N LOK-ACA-1804 Column Cable Shift Linkage, 2.0" GM, Ready-To-Install, Billet/5'Teflon Lined Cbl Today $99.95

http://store.summitracing.com/defaul...=LOK-ACA-1804+

09-09-2004, 12:00 AM	#1
RODSBYT Registered User Join Date: Jun 2004 Location: GRAFTON , OHIO Posts: 58	column shift linkage Has anyone installed straight rod linkage on their column shift like from kugal or lokar? to eliminate braket from frame. I need to to clear custom exhaust system. 71 short bed 406 with turbo 350. any pictures would be big help. thanks.

09-09-2004, 07:08 AM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Several guys here have used the Lokar kit with great results. It's usually cheaper than trying to chase down all of the factory bits. __________________ I'm on the Instagram- @Gearhead_Kevin

09-09-2004, 08:23 AM	#3
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	I have the lokar rod on mine. had to clear big headers. If I were to do it again I heard lokar now has a cable style that connects nicer. I think this is it. __________________ Support The Board

10-05-2004, 04:21 PM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Summit has it in stock and ready to ship today. Part number is LOK-ACA-1804 You have to go to the manufacturers page and get the part number then see if Summit has it by checking for the part number specifically. They do have it in stock. __________________ I'm on the Instagram- @Gearhead_Kevin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-09-2004, 05:42 PM	#4
RODSBYT Registered User Join Date: Jun 2004 Location: GRAFTON , OHIO Posts: 58	Drink2mny thank for the picture. that is a very nice setup .

10-05-2004, 02:58 PM	#5
guyryan100 Registered User Join Date: Sep 2001 Location: Cumming, GA Posts: 481	anybody know where to find that Lokar cable-driven piece? Jegs and Summit only seem to offer the rod edition....

10-05-2004, 04:33 PM	#8
guyryan100 Registered User Join Date: Sep 2001 Location: Cumming, GA Posts: 481	Well, that makes it easy. Thanks, Tx. --Ryan



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.