panel fuse question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chucks70 · 09-10-2004, 10:21 PM

On both my '70 and '72 the ammeter and temp guages do not work. Since there is a seperate temp. guage I just thought they were broke. When checking the fuse block on the Blazer because the blinker lights went out, the fuse marked pnl in the upper right corner was the only fuse that did not get power whether the was on or off. Should this have power and would this let me use my stock guages? Oh, the gas gages in both vehicles and dash lights all work.

**kwmech** · 09-10-2004, 10:27 PM

Check the fuses in the engine compartment corners

Longhorn Man · 09-10-2004, 10:39 PM

Yes, look along either side on the inner fenders in the harness, there will be 2 small black inline fuses. Odds are, they are blown.
The fuse that you were tasting will be hot as soon as you turn on the parking lights/headlights.

chucks70 · 09-10-2004, 10:41 PM

Do you mean the fusible links that come off the block located on the fender by the battery or is there another fuse I either don't have or just don't know about?

Longhorn Man · 09-10-2004, 11:10 PM

Further back...about 1/2 way from the front of the fender to the back. You may have to dig into the harness a little bit.

chucks70 · 09-10-2004, 11:16 PM

That'll give me something to do tomorrow, like I don't have enough already. Hey Longhorn man 24,207 posts....Don't you do anything else besides answer question from the unknowing souls out here?? I think my wife would hang me by my babymakers. lol

Longhorn Man · 09-10-2004, 11:29 PM

Nope...no life at all.
No wife anymore either...many think that the 24K had something to do with it...but it was a minimal role in the whole thing.

I just like learning about these trucks, and helping other ppl.
it's a great place to pick up chicks too.

09-10-2004, 10:21 PM	#1
chucks70 Registered User Join Date: Feb 2002 Location: Cadiz, OH Posts: 628	panel fuse question On both my '70 and '72 the ammeter and temp guages do not work. Since there is a seperate temp. guage I just thought they were broke. When checking the fuse block on the Blazer because the blinker lights went out, the fuse marked pnl in the upper right corner was the only fuse that did not get power whether the was on or off. Should this have power and would this let me use my stock guages? Oh, the gas gages in both vehicles and dash lights all work. __________________ 68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible.

09-10-2004, 10:41 PM	#4
chucks70 Registered User Join Date: Feb 2002 Location: Cadiz, OH Posts: 628	Do you mean the fusible links that come off the block located on the fender by the battery or is there another fuse I either don't have or just don't know about? __________________ 68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible.

09-10-2004, 11:16 PM	#6
chucks70 Registered User Join Date: Feb 2002 Location: Cadiz, OH Posts: 628	That'll give me something to do tomorrow, like I don't have enough already. Hey Longhorn man 24,207 posts....Don't you do anything else besides answer question from the unknowing souls out here?? I think my wife would hang me by my babymakers. lol __________________ 68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-10-2004, 10:27 PM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,628	Check the fuses in the engine compartment corners

09-10-2004, 10:39 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Yes, look along either side on the inner fenders in the harness, there will be 2 small black inline fuses. Odds are, they are blown. The fuse that you were tasting will be hot as soon as you turn on the parking lights/headlights.

09-10-2004, 11:10 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Further back...about 1/2 way from the front of the fender to the back. You may have to dig into the harness a little bit.

09-10-2004, 11:29 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Nope...no life at all. No wife anymore either...many think that the 24K had something to do with it...but it was a minimal role in the whole thing. I just like learning about these trucks, and helping other ppl. it's a great place to pick up chicks too.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.