454 and a 350 for sale, near Sacramento, CA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 10-01-2004, 02:42 PM

454 BBC
Performer aluminum intake, Edelbrock replacement carb, HEI manifolds with air tubes for smog. Alt and brackets included.
driven 4K miles since rebuild.
Compression is at 180lbs per cyl.
750.00 obro.

350 GM Goodwrench motor, 9K miles driven since installation. Stock with all accessories. Q-jet, Perfomer aluminum intake, HEI. Alt and PS schtuff included.
Bought it with my 70 Blazer, going with a Vortec.
750.00 obro

bigjimzlll · 10-02-2004, 12:49 AM

can you give me the casting numbers on the block and heads of the 454?

*FormerMember* · 10-02-2004, 01:05 AM

Yeah, I can get them tomorrow.

If it helps, it's from a 1976 C30 Pick up. Heads match the motor.

grayw0lf · 10-02-2004, 06:37 AM

Wow! Those are some good deals! If only I were closer...

ZOOMY · 10-02-2004, 06:40 AM

Can you get a trucking estimate to Wi. (53932) for a palletized 454 ?..............Zoomy

*FormerMember* · 10-02-2004, 11:54 AM

Shipping via Forward Air is about 225.00.

Guestimated the 454 is 650.00 lbs.

Closest terminal is Sacramento, if you want to take a peek. You may also wat to check out Freightquote.com

Block casting number is 36195. Where do I find the head casting #'s?

RON WOODGEARD · 10-02-2004, 06:47 PM

Are you interested in anything in Trade for the Big Block ???

Z28Owner · 10-02-2004, 06:53 PM

Quote:

Originally Posted by grendel

Shipping via Forward Air is about 225.00.

Guestimated the 454 is 650.00 lbs.

Closest terminal is Sacramento, if you want to take a peek. You may also wat to check out Freightquote.com

Block casting number is 36195. Where do I find the head casting #'s?

Chevy smallblock and big block cylinder heads have the CASTING NUMBER and the CASTING DATE located in the rocker arm valley. These numbers are found after removing the valve cover on the head. Some cast iron heads have the casting number on the underside of an intake runner. Some aluminum heads have the casting date on the underside of an intake runner. The casting number of the cylinder head follows the same form as those found on blocks. There will be six to eight digits for the casting number. The head casting date will have a letter for the month and numerals for the day of the month and the year of the decade. Some head casting dates will give the decade and year. In the picture above, the casting number is shown with the casting date right below it. On other head castings the casting date may be in a different location in the rocker arm valley and is not always right below the casting number. Look at all of the features on the heads to help determine which casting you have and when it was made.

http://www.mortec.com

*FormerMember* · 10-02-2004, 07:47 PM

Quote:

Originally Posted by Z28Owner

Chevy smallblock and big block cylinder heads have the CASTING NUMBER and the CASTING DATE located in the rocker arm valley. These numbers are found after removing the valve cover on the head. Some cast iron heads have the casting number on the underside of an intake runner. Some aluminum heads have the casting date on the underside of an intake runner. The casting number of the cylinder head follows the same form as those found on blocks. There will be six to eight digits for the casting number. The head casting date will have a letter for the month and numerals for the day of the month and the year of the decade. Some head casting dates will give the decade and year. In the picture above, the casting number is shown with the casting date right below it. On other head castings the casting date may be in a different location in the rocker arm valley and is not always right below the casting number. Look at all of the features on the heads to help determine which casting you have and when it was made.

http://www.mortec.com

Thanks for the info. The valve covers are on and quite frankly, I don't want to pull them.

*FormerMember* · 10-02-2004, 07:48 PM

Quote:

Originally Posted by RON WOODGEARD

Are you interested in anything in Trade for the Big Block ???

What do you have, I am always interested in horse trading.

Nick's683/4 · 10-03-2004, 03:04 AM

can you get some pics of the 350 and the casting #. Where in norcal are you?

Thanks Nick

*FormerMember* · 10-03-2004, 11:19 AM

I am in El Dorado, CA.

I'll check on casting numbers. Right now, my blazer is getting Rhino lined, so the motor is out of reach, it's currently in Rancho Cordova. I have all receipts on the 350, so it's still on warranty for another 2 years.

10-01-2004, 02:42 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	454 and a 350 for sale, near Sacramento, CA 454 BBC Performer aluminum intake, Edelbrock replacement carb, HEI manifolds with air tubes for smog. Alt and brackets included. driven 4K miles since rebuild. Compression is at 180lbs per cyl. 750.00 obro. 350 GM Goodwrench motor, 9K miles driven since installation. Stock with all accessories. Q-jet, Perfomer aluminum intake, HEI. Alt and PS schtuff included. Bought it with my 70 Blazer, going with a Vortec. 750.00 obro

10-02-2004, 12:49 AM	#2
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	can you give me the casting numbers on the block and heads of the 454? __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

10-02-2004, 06:37 AM	#4
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	Wow! Those are some good deals! If only I were closer... __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!

10-02-2004, 06:40 AM	#5
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	shipping Can you get a trucking estimate to Wi. (53932) for a palletized 454 ?..............Zoomy

10-02-2004, 11:54 AM	#6
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Shipping via Forward Air is about 225.00. Guestimated the 454 is 650.00 lbs. Closest terminal is Sacramento, if you want to take a peek. You may also wat to check out Freightquote.com Block casting number is 36195. Where do I find the head casting #'s? Last edited by FormerMember; 10-02-2004 at 11:56 AM.

10-02-2004, 01:05 AM	#3
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Yeah, I can get them tomorrow. If it helps, it's from a 1976 C30 Pick up. Heads match the motor.

10-02-2004, 06:47 PM	#7
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	Are you interested in anything in Trade for the Big Block ???

10-03-2004, 03:04 AM	#11
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	can you get some pics of the 350 and the casting #. Where in norcal are you? Thanks Nick __________________ 70 1 ton with a 454 and a 4 speed and a np205

10-03-2004, 11:19 AM	#12
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	I am in El Dorado, CA. I'll check on casting numbers. Right now, my blazer is getting Rhino lined, so the motor is out of reach, it's currently in Rancho Cordova. I have all receipts on the 350, so it's still on warranty for another 2 years.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.