blazer c-notch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged74 · 10-05-2004, 10:36 PM

will the bolt in notch for a 67-72 truck work on a blazer? and are the bolt in notches crap?? I would prefer a nice weld in if anyone makes one. any info would be appreciated.

Trifelynn · 10-05-2004, 10:45 PM

Ditto on the question

I asked it in a previous thread on a different topic, but hoping that it will get answered

Staceydude · 10-05-2004, 10:49 PM

I have kind of wondered the same thing.

I could see where a properly designed bolt-on one could actually be stronger than a welded one if done properly.

Of course you could always buy a bolt-on and weld it and bolt it....

I would like to see some of the guys who have done both to see what they think the differences are.

advantages and disadvantages....

Regards

Stacey

*1972C10* · 10-05-2004, 11:22 PM

Just make one out of pipe and plate steel unless you want a huge one that will work fine. put the pipe in there and cap it witht he plate then cut everything out.

bagged74 · 10-07-2004, 09:17 PM

anyone have a definite answer?

*1972C10* · 10-08-2004, 01:36 AM

If you have welding / Fabricating skills of the slightest level you can make your own Its not rocket science Most are two pieces of plate connected with Flatbar

How many inch notch where you looking for? I have a friend thats all about airbags and all that crap. I can ask him what sources he knows of for these trucks Althou We were going to do a homemade on his truck Untill he lost interest In it ..

10-05-2004, 10:36 PM	#1
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	blazer c-notch will the bolt in notch for a 67-72 truck work on a blazer? and are the bolt in notches crap?? I would prefer a nice weld in if anyone makes one. any info would be appreciated.

10-05-2004, 10:45 PM	#2
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	Ditto on the question I asked it in a previous thread on a different topic, but hoping that it will get answered __________________ Always looking for a 2wd blazer

10-05-2004, 10:49 PM	#3
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	I have kind of wondered the same thing I have kind of wondered the same thing. I could see where a properly designed bolt-on one could actually be stronger than a welded one if done properly. Of course you could always buy a bolt-on and weld it and bolt it.... I would like to see some of the guys who have done both to see what they think the differences are. advantages and disadvantages.... Regards Stacey

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-05-2004, 11:22 PM	#4
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Just make one out of pipe and plate steel unless you want a huge one that will work fine. put the pipe in there and cap it witht he plate then cut everything out.

10-07-2004, 09:17 PM	#5
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	anyone have a definite answer?

10-08-2004, 01:36 AM	#6
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	If you have welding / Fabricating skills of the slightest level you can make your own Its not rocket science Most are two pieces of plate connected with Flatbar How many inch notch where you looking for? I have a friend thats all about airbags and all that crap. I can ask him what sources he knows of for these trucks Althou We were going to do a homemade on his truck Untill he lost interest In it ..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.