Dylan1970's Truck Pics!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Canadian694x4** · 10-14-2004, 05:30 PM

Dylan's 1970 Chevy Custom/10 LWB...

1969 GMC · 10-14-2004, 05:48 PM

sweet, i like how the rear rollpan is molded in with the bedsides, that looks superb

LUV2XCLR8 · 10-14-2004, 06:01 PM

HEY I JUST SOLD THAT EXACT SAME ROLLPAN TO A WA. MEMBER.

saulgoode · 10-14-2004, 06:07 PM

The white wall tires look good on that truck, I wouldn't change a thing.

Saulgoode

Brainchild · 10-14-2004, 08:00 PM

I'm seriously jealous,that is a great looking truck

dylan1970 · 10-14-2004, 08:09 PM

Thanks I feel the same way about all the other trucks on this site and thanks to Brian for posting them for me! I'll be getting some more up in the spring once I get it lowered a little more.

FRENCHBLUE72 · 10-15-2004, 12:40 AM

Nice looking ride are those clear marker's in the front fender's??

Low69CST · 10-15-2004, 12:41 AM

You got a clean, good lookin truck. I like your tire/wheel combo too. Your truck is really different than what everybody else has. Sweet truck.

71-longbed · 10-15-2004, 02:05 AM

Very clean and tight .. another whitewalls guy .... yeepppeeee !!!

dylan1970 · 10-15-2004, 07:28 AM

The side marker lights are clear too. I got them from manes truck parts. I eventually want to get a new bed with the marker lights and keep them clear as well.

dinnut · 10-15-2004, 03:10 PM

how much is that lowered? very nice!

dylan1970 · 10-15-2004, 03:34 PM

The springs are only taken out of it in that pic... I just wanted to see how low it would sit before I decided to do a c-notch.

dinnut · 10-15-2004, 03:42 PM

what do you mean the springs are only taken out? like there are no springs at all?

oh and why get another bed? you could just cut holes for your sidemarkers in the current bed. it would be a looootttt cheaper. just get all the correct measurements from someone off the board, cut and install the new makers

dylan1970 · 10-15-2004, 03:51 PM

Nope none at all... it was a nice day out and i wanted to find out how low it would sit because i want to get air ride. Figured when all the air was let out of em it would sit this low.

10-14-2004, 05:30 PM	#1
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Dylan1970's Truck Pics!! Dylan's 1970 Chevy Custom/10 LWB... Attached Images __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

10-14-2004, 05:48 PM	#2
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	sweet, i like how the rear rollpan is molded in with the bedsides, that looks superb __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

10-14-2004, 06:01 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	HEY I JUST SOLD THAT EXACT SAME ROLLPAN TO A WA. MEMBER. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-14-2004, 08:00 PM	#5
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	I'm seriously jealous,that is a great looking truck __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

10-15-2004, 12:40 AM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Nice looking ride are those clear marker's in the front fender's?? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-14-2004, 06:07 PM	#4
saulgoode Registered User Join Date: Dec 2003 Location: Houston Posts: 388	The white wall tires look good on that truck, I wouldn't change a thing. Saulgoode

10-14-2004, 08:09 PM	#6
dylan1970 Registered User Join Date: Oct 2004 Location: Owen Sound, Ont. Canada Posts: 79	Thanks I feel the same way about all the other trucks on this site and thanks to Brian for posting them for me! I'll be getting some more up in the spring once I get it lowered a little more.

10-15-2004, 12:41 AM	#8
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	You got a clean, good lookin truck. I like your tire/wheel combo too. Your truck is really different than what everybody else has. Sweet truck. __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

10-15-2004, 02:05 AM	#9
71-longbed Its Magically Delicious Join Date: Jan 2003 Location: oregon Posts: 2,398	Very clean and tight .. another whitewalls guy .... yeepppeeee !!! __________________ 71 C10 LWB 350sbc -TH350 12 bolt 3.42 Posi Of all my favorite things to do, The utmost is to have a brew. My love grows for my foamy friend, with each thirst-quenching elbow bend. Beer so frosty, smooth, and cold it's paradise pure liquid gold. Yes beer means many things to me that's all for now cus I gotta pee.

10-15-2004, 07:28 AM	#10
dylan1970 Registered User Join Date: Oct 2004 Location: Owen Sound, Ont. Canada Posts: 79	The side marker lights are clear too. I got them from manes truck parts. I eventually want to get a new bed with the marker lights and keep them clear as well.

10-15-2004, 03:10 PM	#11
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	how much is that lowered? very nice! __________________ 70 longbed 496/th400/Ford 9"

10-15-2004, 03:34 PM	#12
dylan1970 Registered User Join Date: Oct 2004 Location: Owen Sound, Ont. Canada Posts: 79	The springs are only taken out of it in that pic... I just wanted to see how low it would sit before I decided to do a c-notch.

10-15-2004, 03:42 PM	#13
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	what do you mean the springs are only taken out? like there are no springs at all? oh and why get another bed? you could just cut holes for your sidemarkers in the current bed. it would be a looootttt cheaper. just get all the correct measurements from someone off the board, cut and install the new makers __________________ 70 longbed 496/th400/Ford 9"

10-15-2004, 03:51 PM	#14
dylan1970 Registered User Join Date: Oct 2004 Location: Owen Sound, Ont. Canada Posts: 79	Nope none at all... it was a nice day out and i wanted to find out how low it would sit because i want to get air ride. Figured when all the air was let out of em it would sit this low.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.