blazer back window in reg cab? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

purple gas · 10-16-2004, 01:00 PM

Anybody ever do it, see it, hear of it, or think of it. After I move my tank, I'd like to have a roll down back window in my truck.. well, maybe I'l get it driving first, maybe even today.

saulgoode · 10-16-2004, 01:04 PM

Are you talkin about taking a second gen blazer roll down window and intergrating it into a 67-72 pickup cab?

Saulgoode

purple gas · 10-16-2004, 01:06 PM

yup

purple gas · 10-16-2004, 01:09 PM

or if not the window at least the concept. I was thinking of getting a mechanism and getting a glass shop to cut a window that would look reasonably original.. I know it would be a nightmare project. Just wondering if anyone has actually ever done it?

NPilot1975 · 10-16-2004, 01:22 PM

Don't know how it was done, but the Blazer that has been in Hot Rod, built by John Buttera has a power rear window. It is the Black on Top, Silver on Bottom with orange stripe one.

cdowns · 10-16-2004, 01:36 PM

the window track and motor assy would be pretty easy to do the real nightmare is to figure out how to seal the bottom up and or building a drain for water leakage

FRENCHBLUE72 · 10-16-2004, 08:38 PM

There is a company that used to make electric roll down window's year's ago for 73 and later.. I f they still make this product you could retrofit our glass into it???? Best of luck.

bouncytruck · 10-16-2004, 09:12 PM

I've seen kits for the 67-72 pickups to make them power. Not sure where anymore though.

Dave Reed · 10-17-2004, 12:01 AM

Ford did this to their BigFoot trucks. Maybe you could pirate it out of that.

10-16-2004, 01:00 PM	#1
purple gas Registered User Join Date: Oct 2004 Location: saskatoon, planet earth Posts: 694	blazer back window in reg cab? Anybody ever do it, see it, hear of it, or think of it. After I move my tank, I'd like to have a roll down back window in my truck.. well, maybe I'l get it driving first, maybe even today.

10-16-2004, 01:22 PM	#5
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Don't know how it was done, but the Blazer that has been in Hot Rod, built by John Buttera has a power rear window. It is the Black on Top, Silver on Bottom with orange stripe one. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

10-16-2004, 01:36 PM	#6
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	the window track and motor assy would be pretty easy to do the real nightmare is to figure out how to seal the bottom up and or building a drain for water leakage __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-16-2004, 08:38 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	There is a company that used to make electric roll down window's year's ago for 73 and later.. I f they still make this product you could retrofit our glass into it???? Best of luck. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-16-2004, 09:12 PM	#8
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	I've seen kits for the 67-72 pickups to make them power. Not sure where anymore though. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

10-16-2004, 01:04 PM	#2
saulgoode Registered User Join Date: Dec 2003 Location: Houston Posts: 388	Are you talkin about taking a second gen blazer roll down window and intergrating it into a 67-72 pickup cab? Saulgoode

10-16-2004, 01:06 PM	#3
purple gas Registered User Join Date: Oct 2004 Location: saskatoon, planet earth Posts: 694	yup

10-16-2004, 01:09 PM	#4
purple gas Registered User Join Date: Oct 2004 Location: saskatoon, planet earth Posts: 694	or if not the window at least the concept. I was thinking of getting a mechanism and getting a glass shop to cut a window that would look reasonably original.. I know it would be a nightmare project. Just wondering if anyone has actually ever done it?

10-17-2004, 12:01 AM	#9
Dave Reed Registered User Join Date: Nov 2003 Location: CT Posts: 290	Ford did this to their BigFoot trucks. Maybe you could pirate it out of that.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.