FS: 2001 60/40 Silverado Seats with folding Console -- DFW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FirstGen · 10-19-2004, 04:13 AM

$400 come get them!!!

I bought these seats a few months ago for my truck. At the time I had seen these exact seats go for up to $800 on ebay. I offered a new buyer in the area $450 picked up cash and he ended the auction. There is nothing wrong with them and the have about 2000 miles of drive time on them.
http://cgi.ebay.com/ebaymotors/ws/eB...category=33701

Why am I selling these? Read on.

At the time I had planned on running an automatic untill I got a 6 speed manual cheap. I've tried to make these seats work but it just really isn't gonna cut it because of where the shifter comes out of the floor. If you look in the pics you can see the huge piece of mild steel I had to use to extend it away from the seats.
With a factory manual problem it wouldn't be a problem.

Consider partial trades for a posi, SWB stepside bed sides, coil overs. Adjustable pan hard bar?

Hotrodhenryj · 10-19-2004, 05:54 AM

Those are great looking seats to bad about the shifter. I have a 57 that I had the same problem with and I bought a Hurst shifter handle that had an extreme curve in it. (Kinda looks like a boom-a-rang) LOL I think this would work for you also. you could weld a clamp bracket to the stub on your stock shifter and bolt this one on. The handle wraps the seat and has the clearance needed to clear. I believe the handles are still available from Hurst. I will see if I can get a link and post it.

88Jimmy4x4 · 10-19-2004, 08:33 AM

Those are not from a 2001, if they were then the seat belts would be attached/coming thru the seat.
They are nice though.

BK · 10-19-2004, 10:55 AM

yeah, i believe those seats are out of an 88-98 chevy, gmc. 99-05 seats have the built in shoulder harness seat belt right in the seat, very helpful for us pre-66 guys.

FirstGen · 10-19-2004, 03:14 PM

Ok guys LOL, I'll edit it. Maybe I got confused.

Senator350 · 10-19-2004, 06:17 PM

do you mean to say that these would fit in my 70 k10 with a factory 4 speed?

FirstGen · 10-19-2004, 06:20 PM

Yes because the shifter base is located much farther forward.

FirstGen · 10-20-2004, 02:43 PM

bump

FirstGen · 10-22-2004, 09:53 AM

ttt

1978steven · 10-22-2004, 01:35 PM

If you still have the seat when I get back in town I would like to take a look at it? I'm in Jacksonville, Fl until November 6th. Did the seat bolt right up or did you have to moddify anything?

Thannks,
Steven

FirstGen · 10-22-2004, 02:04 PM

Hopefully I won't have it but holler at me anyway. As far as bolting in. It physically fits fine without modification but you would need to make brakets to make it a bolt in. I just drilled some holes instead...

FirstGen · 10-26-2004, 02:02 PM

going to ebay if nobody is interested...

1978steven · 10-26-2004, 08:55 PM

I'll be back in Fort Worth on the 6th of Nov. if you still have it then.

Good luck.

FirstGen · 10-26-2004, 09:16 PM

Crazy timing, I have to take a trip up to Michigan on the 6th through the 20th of November!
I may just hold off I guess.

1978steven · 10-26-2004, 09:25 PM

Well, just keep me in the loop. I'm really interested....

**BIG ORANGE** · 10-26-2004, 09:48 PM

That is the same seat I have in the Harley truck that I'm finishing up. I took 2" out of the seat brackets so the seat would be lower in the truck and with the matching seat belts it looks sweet. I've had this seat for around 7 or 8 yrs I paid 350.00 for it from a guy in Ohio at the Auto Fair in Charlotte!

FirstGen · 10-31-2004, 01:54 PM

ttt

FirstGen · 11-02-2004, 01:12 AM

ttt

1978steven · 11-06-2004, 05:32 PM

Well, I'm back... And I guess you are gone now? Let me know when you get back I'd like to take a look at the seat.

FirstGen · 11-06-2004, 11:31 PM

I just got here today. Will be back in ten days so I will hit you up.
Dean is first in line but if that falls through your next.
-Taylor

1978steven · 11-07-2004, 05:09 PM

Just let me know...

10-19-2004, 04:13 AM	#1
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	FS: 1998 60/40 Silverado Seats with folding Console -- DFW $400 come get them!!! I bought these seats a few months ago for my truck. At the time I had seen these exact seats go for up to $800 on ebay. I offered a new buyer in the area $450 picked up cash and he ended the auction. There is nothing wrong with them and the have about 2000 miles of drive time on them. http://cgi.ebay.com/ebaymotors/ws/eB...category=33701 Why am I selling these? Read on. At the time I had planned on running an automatic untill I got a 6 speed manual cheap. I've tried to make these seats work but it just really isn't gonna cut it because of where the shifter comes out of the floor. If you look in the pics you can see the huge piece of mild steel I had to use to extend it away from the seats. With a factory manual problem it wouldn't be a problem. Consider partial trades for a posi, SWB stepside bed sides, coil overs. Adjustable pan hard bar? Attached Images __________________ 1968 C10 build in process TT LSA/6L90e/9" Last edited by FirstGen; 10-19-2004 at 03:14 PM.

10-19-2004, 05:54 AM	#2
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Those are great looking seats to bad about the shifter. I have a 57 that I had the same problem with and I bought a Hurst shifter handle that had an extreme curve in it. (Kinda looks like a boom-a-rang) LOL I think this would work for you also. you could weld a clamp bracket to the stub on your stock shifter and bolt this one on. The handle wraps the seat and has the clearance needed to clear. I believe the handles are still available from Hurst. I will see if I can get a link and post it. __________________ Arizona rust free sheetmetal

10-19-2004, 08:33 AM	#3
88Jimmy4x4 Registered User Join Date: Oct 2003 Location: houston, texas Posts: 1,974	Those are not from a 2001, if they were then the seat belts would be attached/coming thru the seat. They are nice though. __________________ 2008 Silverado Z71 RCSB 1991 GMC Jimmy 4x4 1976 GMC Sierra C15 SWB

10-19-2004, 03:14 PM	#5
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Ok guys LOL, I'll edit it. Maybe I got confused. __________________ 1968 C10 build in process TT LSA/6L90e/9"

10-19-2004, 06:17 PM	#6
Senator350 Registered User Join Date: Feb 2004 Location: Albany, NY Posts: 522	do you mean to say that these would fit in my 70 k10 with a factory 4 speed? __________________ RN U OVR

10-19-2004, 10:55 AM	#4
BK BK Built Join Date: Aug 2004 Location: Oroville, WA Posts: 478	yeah, i believe those seats are out of an 88-98 chevy, gmc. 99-05 seats have the built in shoulder harness seat belt right in the seat, very helpful for us pre-66 guys.

10-19-2004, 06:20 PM	#7
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Yes because the shifter base is located much farther forward. __________________ 1968 C10 build in process TT LSA/6L90e/9"

10-20-2004, 02:43 PM	#8
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	bump __________________ 1968 C10 build in process TT LSA/6L90e/9"

10-22-2004, 09:53 AM	#9
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	ttt __________________ 1968 C10 build in process TT LSA/6L90e/9"

10-22-2004, 01:35 PM	#10
1978steven Registered User Join Date: Oct 2004 Location: Currently New Windsor, NY but Texas is home Posts: 332	If you still have the seat when I get back in town I would like to take a look at it? I'm in Jacksonville, Fl until November 6th. Did the seat bolt right up or did you have to moddify anything? Thannks, Steven __________________ 2002 Silverado 2500HD LB7 CCSB LT EFI Live by Rob at ATP, Edge CTS Insight DSP 5 control, S&B CAI, PPE boost valve, Pro Fab AIH, AirDog II 165, PPE WIF sensor delete plug, 5" stainless exhaust, Cognito braces & HD tie rods, H2's 315/70 R17 BFG's 2004 Tahoe LT 2006 Silverado Z71 LS 1971 Chevy C10

10-22-2004, 02:04 PM	#11
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Hopefully I won't have it but holler at me anyway. As far as bolting in. It physically fits fine without modification but you would need to make brakets to make it a bolt in. I just drilled some holes instead... __________________ 1968 C10 build in process TT LSA/6L90e/9"

10-26-2004, 02:02 PM	#12
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	going to ebay if nobody is interested... __________________ 1968 C10 build in process TT LSA/6L90e/9"

10-26-2004, 08:55 PM	#13
1978steven Registered User Join Date: Oct 2004 Location: Currently New Windsor, NY but Texas is home Posts: 332	I'll be back in Fort Worth on the 6th of Nov. if you still have it then. Good luck. __________________ 2002 Silverado 2500HD LB7 CCSB LT EFI Live by Rob at ATP, Edge CTS Insight DSP 5 control, S&B CAI, PPE boost valve, Pro Fab AIH, AirDog II 165, PPE WIF sensor delete plug, 5" stainless exhaust, Cognito braces & HD tie rods, H2's 315/70 R17 BFG's 2004 Tahoe LT 2006 Silverado Z71 LS 1971 Chevy C10

10-26-2004, 09:16 PM	#14
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Crazy timing, I have to take a trip up to Michigan on the 6th through the 20th of November! I may just hold off I guess. __________________ 1968 C10 build in process TT LSA/6L90e/9"

10-26-2004, 09:25 PM	#15
1978steven Registered User Join Date: Oct 2004 Location: Currently New Windsor, NY but Texas is home Posts: 332	Well, just keep me in the loop. I'm really interested.... __________________ 2002 Silverado 2500HD LB7 CCSB LT EFI Live by Rob at ATP, Edge CTS Insight DSP 5 control, S&B CAI, PPE boost valve, Pro Fab AIH, AirDog II 165, PPE WIF sensor delete plug, 5" stainless exhaust, Cognito braces & HD tie rods, H2's 315/70 R17 BFG's 2004 Tahoe LT 2006 Silverado Z71 LS 1971 Chevy C10



Register or Log In To remove these advertisements.

10-26-2004, 09:48 PM	#16
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,752	That is the same seat I have in the Harley truck that I'm finishing up. I took 2" out of the seat brackets so the seat would be lower in the truck and with the matching seat belts it looks sweet. I've had this seat for around 7 or 8 yrs I paid 350.00 for it from a guy in Ohio at the Auto Fair in Charlotte! __________________ Things happen for a reason!

10-31-2004, 01:54 PM	#17
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	ttt __________________ 1968 C10 build in process TT LSA/6L90e/9"

11-02-2004, 01:12 AM	#18
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	ttt __________________ 1968 C10 build in process TT LSA/6L90e/9"

11-06-2004, 05:32 PM	#19
1978steven Registered User Join Date: Oct 2004 Location: Currently New Windsor, NY but Texas is home Posts: 332	Well, I'm back... And I guess you are gone now? Let me know when you get back I'd like to take a look at the seat. __________________ 2002 Silverado 2500HD LB7 CCSB LT EFI Live by Rob at ATP, Edge CTS Insight DSP 5 control, S&B CAI, PPE boost valve, Pro Fab AIH, AirDog II 165, PPE WIF sensor delete plug, 5" stainless exhaust, Cognito braces & HD tie rods, H2's 315/70 R17 BFG's 2004 Tahoe LT 2006 Silverado Z71 LS 1971 Chevy C10

11-06-2004, 11:31 PM	#20
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	I just got here today. Will be back in ten days so I will hit you up. Dean is first in line but if that falls through your next. -Taylor __________________ 1968 C10 build in process TT LSA/6L90e/9"

11-07-2004, 05:09 PM	#21
1978steven Registered User Join Date: Oct 2004 Location: Currently New Windsor, NY but Texas is home Posts: 332	Just let me know... __________________ 2002 Silverado 2500HD LB7 CCSB LT EFI Live by Rob at ATP, Edge CTS Insight DSP 5 control, S&B CAI, PPE boost valve, Pro Fab AIH, AirDog II 165, PPE WIF sensor delete plug, 5" stainless exhaust, Cognito braces & HD tie rods, H2's 315/70 R17 BFG's 2004 Tahoe LT 2006 Silverado Z71 LS 1971 Chevy C10

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.