![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Ebay Junky
Join Date: Oct 2003
Location: CO
Posts: 893
|
Cant put my tailgate on
how do you put your tailgate on? i cant get it to fit, i cant get both sides to fit into the trunions. i have a 72 fleetside by the way.
__________________
1972 CHEVY C-10 SWB 2WD - Possible Typhoon 4.3 turbo drivetrain.. 1983 Chevy c10 swb 2wd - possible 350tbi supercharged... |
![]() |
![]() |
![]() |
#2 |
71 DELUX
Join Date: Sep 2003
Location: Northern CA / Sac
Posts: 1,056
|
stock gate or aftermarket?
I just put mine back on a couple of weeks ago. Got some milk crates and a blanket, stacked them up at the rear, put the blanket on top, scooted the gate into place while resting on them, trunions inserted with ease and started bolting into place. Are the trunions the right ones for the gate? Maybe and earlier model year?
__________________
5/4 drop LWB wood bed - 15x8 front 235/60 - 15x10 rear 295/50 2003 FORD Escape 1998 Honda VTR1000 |
![]() |
![]() |
![]() |
#3 |
faster, faster, faster
Join Date: Dec 2001
Location: Houston ,Texas ,USA
Posts: 1,354
|
Try putting the trunions on the gate before you bolt them on the bed.
__________________
I'm going to Law School, wanna debate? It's good practice. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2004
Location: Canton North Carolina
Posts: 466
|
Use some tape to hold the trunnions in place on the gate and the tailgate should slide into place. lay out the 9/16 wrench and four bolts -2 for each side and get some help to hold the gate in place 15-20 minutes tops if the box is square and in good shape.
|
![]() |
![]() |
![]() |
#5 |
Ebay Junky
Join Date: Oct 2003
Location: CO
Posts: 893
|
its an reproduction, but i dont think it is any different from the original ones?
__________________
1972 CHEVY C-10 SWB 2WD - Possible Typhoon 4.3 turbo drivetrain.. 1983 Chevy c10 swb 2wd - possible 350tbi supercharged... |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2002
Location: central pa
Posts: 1,525
|
The way I normally do it is bolt the one side on, Hold the other in my hand, set the tailgate on the bolted 1, tilt the gate at an angle and slip the other on in the channel. Then I hook on the gate limit bars, the tighten the remaining bolts snug but not tight, close the gate position gate for alignment, and tighten bottom bolts both sides. open gate tighten upper bolts. always worked for me.
__________________
72 longhorn c30 502BB/th400/fact air/4.11rear/ custom camper 72 bug(the better half's) under reconstruction 2009 HHR aqua blue 71 GMC k20 350/sm465 2009 Chevy hd3500 6.6 Victory Red crew cab dually Dave & Jeanne |
![]() |
![]() |
![]() |
#7 |
Got Light Emitting Diode?
Join Date: Apr 2004
Location: Newberg, OR
Posts: 2,485
|
if you have a welder you could cut a notch in the tailgate and then cut 2 of the sides flat on the trunions and weld a falt bar in. then its a quick release like the newer trucks
![]()
__________________
1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's ![]() 1993 Cherokee work ride/weekend wheeler |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Oct 2004
Location: saskatoon, planet earth
Posts: 691
|
what dwaite said,, and don't drop it on your foot,,,, trust me on that.
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2003
Location: Easley, South Carolina
Posts: 491
|
dwaite what a perfect description of what to do. When with the instruction video be available. How do you make the tailgate close properly when one side hits at the top right and leaves a 1/2" gap on the top left instead of closing flush on both sides. All the gaps are OK it just won't close against the bedsides flush.
__________________
Richard Dobson |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Jun 2002
Location: central pa
Posts: 1,525
|
Take a square on the bed frame right behind the tail gate to the sides and make sure one side isn't spung out, They have a tendency to tear at the welds right at the bottom. If it is good, Then I would loosen the right side bolts and see if it will slide up a touch then tighten. Then loosen the left side and see if it will lower a touch then tighten.
__________________
72 longhorn c30 502BB/th400/fact air/4.11rear/ custom camper 72 bug(the better half's) under reconstruction 2009 HHR aqua blue 71 GMC k20 350/sm465 2009 Chevy hd3500 6.6 Victory Red crew cab dually Dave & Jeanne |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|