WTB: Pertronix for 6 cylinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

da-burb · 11-08-2004, 10:41 AM

Does anybody have one sitting on the shelf that they decided not to use? I am close to dropping the 250 I-6 in my 67 C10 and I figured I'd try here before going retail. Thanks

Super Duck · 11-08-2004, 12:05 PM

I don't have a pertronix but I do have an hei for a six

**CPNE** · 11-08-2004, 12:16 PM

I just installed this HEI with the external coil (77 Nova style). Are you looking to use the OE distibuter because of A/C clearance issues? If not this type of setup works great!

Erl · 11-08-2004, 12:19 PM

I have a new never used Pertronix Ignitor #1162A and a black Flame Thrower 40k coil. How about $70 including shipping. If there is a problem you can send it back. Did I buy a set of West Coast Jr. mirrors from you last year?
Erl

Super Duck · 11-08-2004, 12:48 PM

mine is a strange one. it has the coil internal like most gm HEI's I am asking $30 plus shipping for a member

**CPNE** · 11-08-2004, 12:53 PM

Quote:

Originally Posted by Super Duck

mine is a strange one. it has the coil internal like most gm HEI's I am asking $30 plus shipping for a member

There were 2 styles. Your's works too, it's just too tall if you have the stock A/C compressor.

Super Duck · 11-08-2004, 01:05 PM

How do you put your rides at the botom of your posts?

**CPNE** · 11-08-2004, 01:13 PM

Quote:

Originally Posted by Super Duck

How do you put your rides at the botom of your posts?

Go to User CP --> Edit signature

da-burb · 11-08-2004, 03:12 PM

Erl, that is exactly what I am looking for. I'll take it. PM me on how you would like payment and your address.

Super Duck, I have never seen an internal mounted coil in the HEI-6's. I would actually prefer that over the external coils since it would clean up that side of the engine.

As it is I am going to keep this truck as stock looking as I can. It is a 67 C10 with 34,000 miles on the body. The original engine was replaced by a 250 with integral head probably due to it sitting around too much of the time.

I'll post pictures of the 6 all painted and pretty on the engine stand. I have to agree with CPNE about how fun it is to work on these 6's. I went Chevy orange on the block and head and hammer tone black on the oil pan and all accessories with a vintage Offenhauser finned valve cover to top it off.

Super Duck · 11-08-2004, 03:47 PM

if you want it PM me with your address and i will ship it out

Erl · 11-09-2004, 10:46 AM

Sent you a PM. Here is the HEI that I installed in my GMC 305 V6. It was out of a 78 Buick 3.8L V6. Took a little machine work, but not too bad. It really makes the engine run smoooth.
Erl

bean · 11-10-2004, 06:06 PM

Just installed the ignitor system in my 250. Very pleased with it. Set the gap of the plugs at .045 and it will run like new.

11-08-2004, 12:05 PM	#2
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	hei I don't have a pertronix but I do have an hei for a six

11-08-2004, 12:16 PM	#3
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	I just installed this HEI with the external coil (77 Nova style). Are you looking to use the OE distibuter because of A/C clearance issues? If not this type of setup works great! Attached Images __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

11-08-2004, 12:19 PM	#4
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	I have a new never used Pertronix Ignitor #1162A and a black Flame Thrower 40k coil. How about $70 including shipping. If there is a problem you can send it back. Did I buy a set of West Coast Jr. mirrors from you last year? Erl __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

11-08-2004, 12:48 PM	#5
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	Hei mine is a strange one. it has the coil internal like most gm HEI's I am asking $30 plus shipping for a member

11-08-2004, 01:05 PM	#7
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	dumb question How do you put your rides at the botom of your posts?

11-08-2004, 10:41 AM	#1
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	WTB: Pertronix for 6 cylinder Does anybody have one sitting on the shelf that they decided not to use? I am close to dropping the 250 I-6 in my 67 C10 and I figured I'd try here before going retail. Thanks __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

11-08-2004, 03:12 PM	#9
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Erl, that is exactly what I am looking for. I'll take it. PM me on how you would like payment and your address. Super Duck, I have never seen an internal mounted coil in the HEI-6's. I would actually prefer that over the external coils since it would clean up that side of the engine. As it is I am going to keep this truck as stock looking as I can. It is a 67 C10 with 34,000 miles on the body. The original engine was replaced by a 250 with integral head probably due to it sitting around too much of the time. I'll post pictures of the 6 all painted and pretty on the engine stand. I have to agree with CPNE about how fun it is to work on these 6's. I went Chevy orange on the block and head and hammer tone black on the oil pan and all accessories with a vintage Offenhauser finned valve cover to top it off. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

11-08-2004, 03:47 PM	#10
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	Hei if you want it PM me with your address and i will ship it out __________________ 67' Chev swb step side 69' SS elky 03' Chev ext cab 4X4 hey who lernt me to spell is there anything else?

11-09-2004, 10:46 AM	#11
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	Sent you a PM. Here is the HEI that I installed in my GMC 305 V6. It was out of a 78 Buick 3.8L V6. Took a little machine work, but not too bad. It really makes the engine run smoooth. Erl Attached Images __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

11-10-2004, 06:06 PM	#12
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	easy Just installed the ignitor system in my 250. Very pleased with it. Set the gap of the plugs at .045 and it will run like new.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.