Hand Throttle help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Harold Shepard · 11-12-2004, 06:34 PM

I just got a hand throttle set-up and need some information on where to mount the bracket that is attached to the cable- looks like it might attach under the dash but not sure. Any help is appreciated. Harold

JimKshortstep4x4 · 11-12-2004, 08:54 PM

The 71-72 style attaches to the gas pedal bracket on the inside of the firewall. I am not sure how the bracket attaches on the rod style accelerators.

I can take a pic of a 72 style if that is what you have.

Jim

Harold Shepard · 11-12-2004, 11:17 PM

I have the 71-72 style. Everything is there but it has a funky bracket that the cable is clamped to and I don't know where it bolts to. Any pics you have would help alot. Thanks Harold

GMC AMI · 11-13-2004, 07:30 AM

Hi Harold, I have two trucks with the same throttle set up. the funky bracket goes up under the dash to hold the cable. If needed give me a shout and I will also snap a few PICs. Mike

Harold Shepard · 11-13-2004, 10:22 AM

Thanks Guys thats all I needed. The hand throttle is here, the truck is there, and I was trying to figure out the new toy

. Thank you for your help. Harold

JimKshortstep4x4 · 11-13-2004, 11:55 AM

This is a pic of the factory 72 throttle setup. The cable mounts to the accelerator pedal bracket as can be seen.

Jim

11-12-2004, 06:34 PM	#1
Harold Shepard Registered User Join Date: May 2004 Location: Canton North Carolina Posts: 466	Hand Throttle help I just got a hand throttle set-up and need some information on where to mount the bracket that is attached to the cable- looks like it might attach under the dash but not sure. Any help is appreciated. Harold

11-13-2004, 07:30 AM	#4
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Hi Harold, I have two trucks with the same throttle set up. the funky bracket goes up under the dash to hold the cable. If needed give me a shout and I will also snap a few PICs. Mike __________________ 1968 Chevy 4x4 307 4 speed

11-13-2004, 10:22 AM	#5
Harold Shepard Registered User Join Date: May 2004 Location: Canton North Carolina Posts: 466	Thanks Guys thats all I needed. The hand throttle is here, the truck is there, and I was trying to figure out the new toy. Thank you for your help. Harold

11-13-2004, 11:55 AM	#6
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	This is a pic of the factory 72 throttle setup. The cable mounts to the accelerator pedal bracket as can be seen. Jim Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-12-2004, 08:54 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	The 71-72 style attaches to the gas pedal bracket on the inside of the firewall. I am not sure how the bracket attaches on the rod style accelerators. I can take a pic of a 72 style if that is what you have. Jim

11-12-2004, 11:17 PM	#3
Harold Shepard Registered User Join Date: May 2004 Location: Canton North Carolina Posts: 466	I have the 71-72 style. Everything is there but it has a funky bracket that the cable is clamped to and I don't know where it bolts to. Any pics you have would help alot. Thanks Harold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.