ramhorn exhaust manifold's f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

whitesswj · 11-13-2004, 02:16 AM

Up for grabs is an awesome set of ramhorn manifolds that dump in the middle and tilt back.

They are the kind that have the heat riser on onside but that was taken out and sealed but the housing is still there. Both sides have been restuded (93 bucks worth of it, ask me if you want to know how that rip off happened) and i'm sure that their in good shape.

I can get pics as soon as someone wants some up.

I'll take 75 + shipping or 45+ship if you want one.

reply here please so i can get the part to the right 1st person.

sswj

Kat · 11-13-2004, 05:04 PM

That song kinda sounds like a PRP(public relations promo) "A happy wife is a happy life?"That's what I am told.

whitesswj · 11-18-2004, 11:04 PM

TTT once more if no one want's it then off to the ebay
.

whitesswj · 12-20-2004, 06:57 PM

ttt. do i need to post some pics?

steven

whitesswj · 01-08-2005, 09:25 PM

ttt

**BIG ORANGE** · 01-09-2005, 12:06 AM

Puts some pics on here! I'm in need of a pas side tilt back in good shape.

whitesswj · 01-09-2005, 02:54 AM

ok i'll have some up tomorrow, i've got some in the cam but not small enough for the board. sswj

**Boog** · 01-09-2005, 04:32 PM

Hey bud. I am currently entertaining the idea of using the ram horn manifold on my 69. Have yours been reconditioned? Have they been cracked and fixed? Would a functioning heat riser be all that important to an occasional driver? I'm in Searcy, Ar. 2 hours away. pics?

whitesswj · 01-09-2005, 05:13 PM

dude, i'm from searcy, born and raised, my faimly lives there still. the heat riser was a mechanism that used the heat fromt he exaust to move the choke rod for the auto choke. these are in good condition, not cracked, so no repairs.

for some reason i can't seem to get the camy to let me up load the pics yet. i'm still trying.

thanks sswj

**Boog** · 01-09-2005, 05:28 PM

Well, small world isn't it? I may even know your folks. Been here since '91. What are your exhaust plans for your truck? Mine is not road ready, far from it. Cab is in primer and bed sitting out back hoping to get inside someday. I put this 88 engine in it with a performer intake and quadrajet with headers. This engine was misrepresented and will have to be rebuilt as it is actually spitting oil out the exhaust. I am not happy with the headers though and considering going with the ram horn units. I'm thinking I can bead blast them and use a high temp paint from Eastwood to keep them looking good for a while.

whitesswj · 01-10-2005, 12:16 AM

here's the picture that i have. i dont' know what the extra is on the driver side one but it looks like the alternator stuff. correct me if i'm wrong.

i need to give the big O 1st chance.

I'd really like to sell the set and remember that shipping will be killer on these due to weight as they weigh close to 15 lbs each.

the heat riser has been removed and the hole for it sealed. the exaust manifold needs the spacer for the right clearances, or so i've been told.

thanks guys. steven

whitesswj · 01-11-2005, 01:24 AM

The Big O has seemed to find his horns else were, therefore, Boog they're your's if ya want 'em. make a good offer to me, if Boog passes then i'll keep going. thanks steven

btw, boog, if you want them then ship is free due to the fact that i'll be in searcy in the near future to visit my dad and brother and i can hand them to ya. thanks again, steven

11-13-2004, 02:16 AM	#1
whitesswj Embrace the Redneck Join Date: Jan 2004 Location: Cabot, AR Posts: 1,334	ramhorn exhaust manifold's f/s Up for grabs is an awesome set of ramhorn manifolds that dump in the middle and tilt back. They are the kind that have the heat riser on onside but that was taken out and sealed but the housing is still there. Both sides have been restuded (93 bucks worth of it, ask me if you want to know how that rip off happened) and i'm sure that their in good shape. I can get pics as soon as someone wants some up. I'll take 75 + shipping or 45+ship if you want one. reply here please so i can get the part to the right 1st person. sswj __________________ '01 Camaro *Son, you just can't get there from here...* Last edited by whitesswj; 01-08-2005 at 09:24 PM. Reason: price reduction

11-18-2004, 11:04 PM	#3
whitesswj Embrace the Redneck Join Date: Jan 2004 Location: Cabot, AR Posts: 1,334	TTT once more if no one want's it then off to the ebay . __________________ '01 Camaro *Son, you just can't get there from here...*

12-20-2004, 06:57 PM	#4
whitesswj Embrace the Redneck Join Date: Jan 2004 Location: Cabot, AR Posts: 1,334	ttt. do i need to post some pics? steven __________________ '01 Camaro *Son, you just can't get there from here...*

01-08-2005, 09:25 PM	#5
whitesswj Embrace the Redneck Join Date: Jan 2004 Location: Cabot, AR Posts: 1,334	ttt __________________ '01 Camaro *Son, you just can't get there from here...*

01-09-2005, 12:06 AM	#6
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Puts some pics on here! I'm in need of a pas side tilt back in good shape. __________________ Things happen for a reason!

11-13-2004, 05:04 PM	#2
Kat Registered User Join Date: Oct 2004 Location: Sapulpa,OK. Posts: 77	That song kinda sounds like a PRP(public relations promo) "A happy wife is a happy life?"That's what I am told.

01-09-2005, 02:54 AM	#7
whitesswj Embrace the Redneck Join Date: Jan 2004 Location: Cabot, AR Posts: 1,334	ok i'll have some up tomorrow, i've got some in the cam but not small enough for the board. sswj __________________ '01 Camaro *Son, you just can't get there from here...*

01-09-2005, 04:32 PM	#8
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,514	Hey bud. I am currently entertaining the idea of using the ram horn manifold on my 69. Have yours been reconditioned? Have they been cracked and fixed? Would a functioning heat riser be all that important to an occasional driver? I'm in Searcy, Ar. 2 hours away. pics? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

01-09-2005, 05:13 PM	#9
whitesswj Embrace the Redneck Join Date: Jan 2004 Location: Cabot, AR Posts: 1,334	dude, i'm from searcy, born and raised, my faimly lives there still. the heat riser was a mechanism that used the heat fromt he exaust to move the choke rod for the auto choke. these are in good condition, not cracked, so no repairs. for some reason i can't seem to get the camy to let me up load the pics yet. i'm still trying. thanks sswj __________________ '01 Camaro *Son, you just can't get there from here...*

01-09-2005, 05:28 PM	#10
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,514	Well, small world isn't it? I may even know your folks. Been here since '91. What are your exhaust plans for your truck? Mine is not road ready, far from it. Cab is in primer and bed sitting out back hoping to get inside someday. I put this 88 engine in it with a performer intake and quadrajet with headers. This engine was misrepresented and will have to be rebuilt as it is actually spitting oil out the exhaust. I am not happy with the headers though and considering going with the ram horn units. I'm thinking I can bead blast them and use a high temp paint from Eastwood to keep them looking good for a while. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

01-10-2005, 12:16 AM	#11
whitesswj Embrace the Redneck Join Date: Jan 2004 Location: Cabot, AR Posts: 1,334	pictures are here here's the picture that i have. i dont' know what the extra is on the driver side one but it looks like the alternator stuff. correct me if i'm wrong. i need to give the big O 1st chance. I'd really like to sell the set and remember that shipping will be killer on these due to weight as they weigh close to 15 lbs each. the heat riser has been removed and the hole for it sealed. the exaust manifold needs the spacer for the right clearances, or so i've been told. thanks guys. steven Attached Images __________________ '01 Camaro *Son, you just can't get there from here...*

01-11-2005, 01:24 AM	#12
whitesswj Embrace the Redneck Join Date: Jan 2004 Location: Cabot, AR Posts: 1,334	The Big O has seemed to find his horns else were, therefore, Boog they're your's if ya want 'em. make a good offer to me, if Boog passes then i'll keep going. thanks steven btw, boog, if you want them then ship is free due to the fact that i'll be in searcy in the near future to visit my dad and brother and i can hand them to ya. thanks again, steven __________________ '01 Camaro *Son, you just can't get there from here...*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.