Breather Filter for PCV system - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crustysarge · 11-28-2004, 03:07 PM

My 72 350 does not have a filter for the hose that connects from the "can" to the valve cover. I see a replacement online but don't see where it would go. Should it have one? You know, the little plastic housed curved filter that goes inside a breather housing and has a clip to hold it.

Longhorn Man · 11-28-2004, 03:40 PM

I don't think these trucks came with that screen. The 71/71 may have, but I know the 69/70 just had it dump into the spacer between the carb and tha air filter.

11-28-2004, 03:07 PM	#1
crustysarge Registered User Join Date: Mar 2004 Location: Aviano, Italy Posts: 221	Breather Filter for PCV system My 72 350 does not have a filter for the hose that connects from the "can" to the valve cover. I see a replacement online but don't see where it would go. Should it have one? You know, the little plastic housed curved filter that goes inside a breather housing and has a clip to hold it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-28-2004, 03:40 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	I don't think these trucks came with that screen. The 71/71 may have, but I know the 69/70 just had it dump into the spacer between the carb and tha air filter.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.