WTB: Grill and Driveshaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lux hauler · 12-04-2004, 12:06 PM

I need both the inner and outer grill for a '71-'72 Chevy....something that's good enough for a driver......nothing cracked, broken or beat all to hell though.
I also need a driveshaft for a '72 350/350 combo lwb 2wd truck.

Thanks!!

c-1072 · 12-04-2004, 05:23 PM

I have a nice inner and outer grill i posted a couple days ago i also think i have the drive shaft you need you arent to far either . what type of money do you want to spend on the grill i have one used and one new aftermarket .the used one has one dent very small at the bottom . pics available .

cib101abn · 12-04-2004, 06:57 PM

I have a nice two piece drive shaft with strong carrier bearing, came out of a 72 Cheyenne LWB but was turned by a 402 and turbo 400, are the splines the same?

lux hauler · 12-05-2004, 09:53 AM

Quote:

Originally Posted by c-1072

I have a nice inner and outer grill i posted a couple days ago i also think i have the drive shaft you need you arent to far either . what type of money do you want to spend on the grill i have one used and one new aftermarket .the used one has one dent very small at the bottom . pics available .

I want the nicest one for least amount of money. :p Do you have any pictures of them?

cib101abn....I believe the driveshaft you have is different from the one I need.

WILLNIK and billsbowtie.....I got your pm's. I'll get back to you later today when I have a little more time.

c-1072 · 12-05-2004, 01:09 PM

Hrere is what i have on file i wll ship it any way you want probaly 125.00 plus shipping cost (maybe $50) thats for inner and outer grill if i have the driveshaft its free plus shipping . greyhound would be the cheapest .

lux hauler · 12-05-2004, 09:34 PM

Anyone happen to know the length of the driveshaft(s) that I need? Wanna make sure I get the right ones. I'd measure the things myself but the engine and tranny are both out of the truck right now.

Thanks!!

badpeanut · 12-06-2004, 12:25 AM

Make sure your donor has the right suspension, too. The rear half doesn't interchange between leafs and coils. Not sure about the front half.

lux hauler · 12-06-2004, 06:40 AM

Quote:

Originally Posted by badpeanut

Make sure your donor has the right suspension, too. The rear half doesn't interchange between leafs and coils. Not sure about the front half.

Thanks for the info!!
It is a coil sprung rear.

lux hauler · 12-07-2004, 06:44 AM

bump

12-04-2004, 12:06 PM	#1
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	WTB: Grill and Driveshaft I need both the inner and outer grill for a '71-'72 Chevy....something that's good enough for a driver......nothing cracked, broken or beat all to hell though. I also need a driveshaft for a '72 350/350 combo lwb 2wd truck. Thanks!! __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian). Last edited by lux hauler; 12-04-2004 at 12:15 PM.

12-04-2004, 05:23 PM	#2
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	Parts I have a nice inner and outer grill i posted a couple days ago i also think i have the drive shaft you need you arent to far either . what type of money do you want to spend on the grill i have one used and one new aftermarket .the used one has one dent very small at the bottom . pics available .

12-04-2004, 06:57 PM	#3
cib101abn Screaming Eagle Join Date: Oct 2004 Location: SW of Houston Posts: 288	I have a nice two piece drive shaft with strong carrier bearing, came out of a 72 Cheyenne LWB but was turned by a 402 and turbo 400, are the splines the same? __________________ "Basic Research is what I am doing when I don't know what I am doing." Dr. Werner VonBraun (Rocket Scientist) Contributing Member 79 GMC SWB w/402 79 Chev SWB w400 sm blk being built remnants of 72 Cheyenne (selling)

12-05-2004, 01:09 PM	#5
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	Couple pics Hrere is what i have on file i wll ship it any way you want probaly 125.00 plus shipping cost (maybe $50) thats for inner and outer grill if i have the driveshaft its free plus shipping . greyhound would be the cheapest . Attached Images

12-05-2004, 09:34 PM	#6
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	Anyone happen to know the length of the driveshaft(s) that I need? Wanna make sure I get the right ones. I'd measure the things myself but the engine and tranny are both out of the truck right now. Thanks!! __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

12-06-2004, 12:25 AM	#7
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	Make sure your donor has the right suspension, too. The rear half doesn't interchange between leafs and coils. Not sure about the front half.

12-07-2004, 06:44 AM	#9
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	bump __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.