column shifter removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ronsk10 · 12-05-2004, 04:46 PM

how do you remove the shifter arm. I just installed a megashifter and would like to remove the stock column arm. Thanks

72_Chev_Truck · 12-05-2004, 05:08 PM

well if you want to just remove the arm, take a small punch and tap out the pin with a hammer, otherwise to remove the whole assembly on the column you have to take off the steering wheel, turn signal switch, then remove the piece that attatches the arm and replace it with one off of a manual truck

12-05-2004, 04:46 PM	#1
ronsk10 Registered User Join Date: Jun 2003 Location: Scotland Neck NC Posts: 316	column shifter removal how do you remove the shifter arm. I just installed a megashifter and would like to remove the stock column arm. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-05-2004, 05:08 PM	#2
72_Chev_Truck Registered User Join Date: Nov 2003 Location: Minnesota Posts: 93	well if you want to just remove the arm, take a small punch and tap out the pin with a hammer, otherwise to remove the whole assembly on the column you have to take off the steering wheel, turn signal switch, then remove the piece that attatches the arm and replace it with one off of a manual truck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.