WTB Vacuum Coupling at the back of intake - The 1947 - Present Chevrolet & GMC Truck Message Board Network

charles oliver · 12-10-2004, 08:09 AM

[B] I am looking for the Vaccum Coupling (T Fitting ) that goes into the back of the intake manifold. One line off the T goes to Carb and the other goes to PVC Valve. I have looked online at a lot of parts places and checked the local parts stores and Can't find one.

Would anybody have one for sale or know where I can get one and what it is called ?

Thanks for your help.

Charlie

JimKshortstep4x4 · 12-10-2004, 09:34 AM

I believe you are looking for an intake manifold vacuum fitting. Paragon has them. Their catalog is a good one to get for detail parts.

A common fitting is PN 3610.

Here is a link. http://www.corvette-paragon.com/

Jim

**kwmech** · 12-10-2004, 11:20 AM

The rear 'T' line feeds the brake booster [3/8] hose, the auto trans and/or the vacuum reservoir. The pcv should be connected to the front of the carb

demi · 12-10-2004, 01:04 PM

Paragon is a good source for those vacuum fittings. That's where I got mine.

charles oliver · 12-10-2004, 02:36 PM

Thanks alot guys. I ordered on3.
Appreciate all the help.
Charlie

12-10-2004, 08:09 AM	#1
charles oliver 68 camtruck Join Date: Mar 2000 Location: Harrison, Ohio USA Posts: 233	WTB Vacuum Coupling at the back of intake [B] I am looking for the Vaccum Coupling (T Fitting ) that goes into the back of the intake manifold. One line off the T goes to Carb and the other goes to PVC Valve. I have looked online at a lot of parts places and checked the local parts stores and Can't find one. Would anybody have one for sale or know where I can get one and what it is called ? Thanks for your help. Charlie __________________ 71 GMC Jimmy 4X4 68 Huger Orange Camaro 454 with TH400 :gmc:

12-10-2004, 02:36 PM	#5
charles oliver 68 camtruck Join Date: Mar 2000 Location: Harrison, Ohio USA Posts: 233	Vacuum Fittings Thanks alot guys. I ordered on3. Appreciate all the help. Charlie __________________ 71 GMC Jimmy 4X4 68 Huger Orange Camaro 454 with TH400 :gmc:

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-10-2004, 09:34 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I believe you are looking for an intake manifold vacuum fitting. Paragon has them. Their catalog is a good one to get for detail parts. A common fitting is PN 3610. Here is a link. http://www.corvette-paragon.com/ Jim

12-10-2004, 11:20 AM	#3
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,650	The rear 'T' line feeds the brake booster [3/8] hose, the auto trans and/or the vacuum reservoir. The pcv should be connected to the front of the carb

12-10-2004, 01:04 PM	#4
demi Registered User Join Date: Sep 2003 Location: Arizona Posts: 305	Paragon is a good source for those vacuum fittings. That's where I got mine.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.