changing out a/c heater control pannel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Newt408 · 12-14-2004, 10:21 PM

What can I look forward to cussing about when I swap out the a/c heater control pannel? Does it control the heater with vaccume lines, cables or wires? Mine wont switch from the floor vents and when I pull the lever to off it makes a sucking sound until I wiggle it around.

KShortell · 12-15-2004, 01:22 PM

Changing out the heater control is pretty easy IF you also remove the radio. Of course, you do need to pull the dash bezel. There is a cable connection for the blend door control and a vacuum connection for the selector.

I changed mine out last year. It's no problem if you pull the radio to get better access.

Good luck!

12-14-2004, 10:21 PM	#1
Newt408 Registered User Join Date: Feb 2004 Location: west texas Posts: 71	changing out a/c heater control pannel What can I look forward to cussing about when I swap out the a/c heater control pannel? Does it control the heater with vaccume lines, cables or wires? Mine wont switch from the floor vents and when I pull the lever to off it makes a sucking sound until I wiggle it around. __________________ The way of a fool is right in his own eyes:but he that hearkeneth unto council is wise. Proverbs 12:15

12-15-2004, 01:22 PM	#2
KShortell Registered User Join Date: Oct 2003 Location: Chesapeake, VA Posts: 734	Changing out the heater control is pretty easy IF you also remove the radio. Of course, you do need to pull the dash bezel. There is a cable connection for the blend door control and a vacuum connection for the selector. I changed mine out last year. It's no problem if you pull the radio to get better access. Good luck! __________________ Semper Paratus

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.