12-15-2004, 05:24 PM | #1 |
Registered User
Join Date: Sep 2003
Location: Boise ID
Posts: 609
|
Trans linkage TH400
Does anybody have A picture of the linkage for the AUTO trans as it attatches from the frame rail to the transmission. I don't remember if the shifter arm (coming from the column) is above or below the center "pivot point". The way I see it if I am 180* out on that installation I could be in L1 instead of park. IS THIS CORRECT? I dont want to start it up and brake my CAM in at 2000 rpm's not knowing that I am starting in L1. I hope this makes sence This is A conversion from manual to Auto.
Gary
__________________
"72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES" |
12-15-2004, 06:11 PM | #2 |
Registered User
Join Date: Sep 2000
Location: Cincinnati,OH,USA
Posts: 464
|
Suns out, snow melted off driveway, ran out in this friken cold and grabbed a pic, gotta move to warmer climates...shows linkage in Neutral position. No park on the 1 ton.
__________________
69 GMC 1 Ton Longhorn 37 Chevy Coupe |
12-15-2004, 06:24 PM | #3 |
Registered User
Join Date: Sep 2003
Location: Arizona
Posts: 305
|
Here's an old pic in park.
|
12-16-2004, 03:17 AM | #4 |
Registered User
Join Date: Sep 2003
Location: Boise ID
Posts: 609
|
Thank you both very much that was A huge help!!!!!!
__________________
"72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES" |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|