WTT: LT1 for 700R4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

saxmo · 12-19-2004, 02:45 PM

Hey guys, I have an LT1 shortblock from my 1994 Camaro for trade. I need a 700R4 in good condition, for my 1970 C10 pickup. The shortblock has original 119,xxx miles, and was running on removal. It is stock with no work ever done on it. I had to use the brackets, etc. to put the new stroked LT1 back in my car... Thanks Dwayne

kevhill85 · 12-19-2004, 05:16 PM

i havr a 700r i built for a 383. never made there . give me a call at 903-288-8555. so we make a deal

saxmo · 12-19-2004, 05:38 PM

Deal is done!

saxmo · 12-19-2004, 05:39 PM

Man, I love this board...!!! Two hours after posting the request, and a deal is struck!

kevhill85 · 01-02-2005, 03:22 PM

thanks man . come to get a trany and left with a 69 swb truck . lol . hope u made it home fine

saxmo · 01-02-2005, 03:37 PM

hey dude made it home fine. Took forever, the truck was fish-tailing when I would go over 35 mph, so I had to take it off and reload it. But, after that, it was smooth sailing all the way home. I moved some stuff around so that I could put it out of the weather, and I'll probably get to start on it Wednesday. Thanks for the help, and I hope that the motors work out well for you. PS, the guy that was with me is gonna go to UTI, and they are gonna use my 94 Z28 as the project car for the class. They plan on around 600+ BHP! They will have it for 15 months, then I get it back (cannot wait).
I decided to go with a Harley-Davidson paint scheme on the truck. I figure if Ford can have a Harley-truck, so could Chevy... I just gotta try and find some Harley wheels for the Chevy.

kevhill85 · 01-02-2005, 03:44 PM

lol. let meknow i get wheel adpt for 135.00 for a set and 11.00 shipping . ucan put ford wheel on it . if end up not wanting a t56 let me. i just order a rebuilt kit for the lt1 and a carb intake .

kevhill85 · 01-02-2005, 03:46 PM

look like to went to a good home . lol

GMC71k20 · 01-02-2005, 05:12 PM

saxmo, any details on the z28? is it still going to be an lt1 based motor? where did you get your stroker?

saxmo · 01-02-2005, 05:24 PM

yes, gonna be LT1 based. I bought the block (stroked LT1) from a Dallas Speedshop. I believe they are gonna go with the LT4 head/intake and 383 LT1 bottom. Other than that, I have no info, except it won't cost me a dime!!!!! They provide all the parts, except the block (just because I had already bought it). It is a 6-speed car. Black with black interior, black powder-coated ZR-1 wheels.

kevhill85 · 01-02-2005, 05:36 PM

any pic of the z28

GMC71k20 · 01-03-2005, 12:06 AM

ya post a pic, and your a lucky bastard

saxmo · 01-03-2005, 11:05 AM

well, here's the before picture.....

GMC71k20 · 01-03-2005, 11:06 AM

looks great, how wide are the rims?

saxmo · 01-03-2005, 11:16 AM

I believe they are 9.5 in front and 11 in rear. They barely tuck under fenders.

saxmo · 01-03-2005, 11:21 AM

What's kewl is I originally got this car for $1300 about 5 months ago. Some kid put it in shop and couldn't afford to get head gasket fixed, cause he was still paying the note on it. The shop called a tow company and they impounded it, until they could get title (it still had a lien from a bank on it)! They sold it to me for the storage fees! And I got a lien-free title because due process was served to the bank and prior owner! How cool is that?!

kevhill85 · 01-03-2005, 11:40 AM

that a good deal . looks good

**N2TRUX** · 01-10-2005, 08:57 PM

So what ever happened to the transmission?

kevhill85 · 01-10-2005, 08:58 PM

i still have it . he came for the 700r and left with my 69 swb . lol

**N2TRUX** · 01-10-2005, 09:15 PM

Whats the story on it?

kevhill85 · 01-10-2005, 09:20 PM

its for sale..$200.00 and you can have it.

12-19-2004, 02:45 PM	#1
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	WTT: LT1 for 700R4 Hey guys, I have an LT1 shortblock from my 1994 Camaro for trade. I need a 700R4 in good condition, for my 1970 C10 pickup. The shortblock has original 119,xxx miles, and was running on removal. It is stock with no work ever done on it. I had to use the brackets, etc. to put the new stroked LT1 back in my car... Thanks Dwayne __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn) Last edited by saxmo; 12-19-2004 at 02:46 PM. Reason: misspelling

12-19-2004, 05:16 PM	#2
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	i havr a 700r i built for a 383. never made there . give me a call at 903-288-8555. so we make a deal __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

12-19-2004, 05:38 PM	#3
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	Deal is done! __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

12-19-2004, 05:39 PM	#4
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	Man, I love this board...!!! Two hours after posting the request, and a deal is struck! __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

01-02-2005, 03:22 PM	#5
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	thanks man . come to get a trany and left with a 69 swb truck . lol . hope u made it home fine __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

01-02-2005, 03:37 PM	#6
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	hey dude made it home fine. Took forever, the truck was fish-tailing when I would go over 35 mph, so I had to take it off and reload it. But, after that, it was smooth sailing all the way home. I moved some stuff around so that I could put it out of the weather, and I'll probably get to start on it Wednesday. Thanks for the help, and I hope that the motors work out well for you. PS, the guy that was with me is gonna go to UTI, and they are gonna use my 94 Z28 as the project car for the class. They plan on around 600+ BHP! They will have it for 15 months, then I get it back (cannot wait). I decided to go with a Harley-Davidson paint scheme on the truck. I figure if Ford can have a Harley-truck, so could Chevy... I just gotta try and find some Harley wheels for the Chevy. __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

01-02-2005, 03:44 PM	#7
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	lol. let meknow i get wheel adpt for 135.00 for a set and 11.00 shipping . ucan put ford wheel on it . if end up not wanting a t56 let me. i just order a rebuilt kit for the lt1 and a carb intake . __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

01-02-2005, 03:46 PM	#8
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	look like to went to a good home . lol __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

01-02-2005, 05:12 PM	#9
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	saxmo, any details on the z28? is it still going to be an lt1 based motor? where did you get your stroker?

01-02-2005, 05:24 PM	#10
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	yes, gonna be LT1 based. I bought the block (stroked LT1) from a Dallas Speedshop. I believe they are gonna go with the LT4 head/intake and 383 LT1 bottom. Other than that, I have no info, except it won't cost me a dime!!!!! They provide all the parts, except the block (just because I had already bought it). It is a 6-speed car. Black with black interior, black powder-coated ZR-1 wheels. __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

01-02-2005, 05:36 PM	#11
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	any pic of the z28 __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

01-03-2005, 12:06 AM	#12
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	ya post a pic, and your a lucky bastard

01-03-2005, 11:05 AM	#13
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	well, here's the before picture..... __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

01-03-2005, 11:06 AM	#14
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	looks great, how wide are the rims?

01-03-2005, 11:16 AM	#15
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	I believe they are 9.5 in front and 11 in rear. They barely tuck under fenders. __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)



Register or Log In To remove these advertisements.

01-03-2005, 11:21 AM	#16
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	What's kewl is I originally got this car for $1300 about 5 months ago. Some kid put it in shop and couldn't afford to get head gasket fixed, cause he was still paying the note on it. The shop called a tow company and they impounded it, until they could get title (it still had a lien from a bank on it)! They sold it to me for the storage fees! And I got a lien-free title because due process was served to the bank and prior owner! How cool is that?! __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

01-03-2005, 11:40 AM	#17
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	that a good deal . looks good __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

01-10-2005, 08:57 PM	#18
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	So what ever happened to the transmission? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-10-2005, 08:58 PM	#19
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	i still have it . he came for the 700r and left with my 69 swb . lol __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

01-10-2005, 09:15 PM	#20
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Whats the story on it?

01-10-2005, 09:20 PM	#21
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	its for sale..$200.00 and you can have it. __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.