edelbrock intake f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CHEVYE · 01-08-2005, 02:17 AM

edelbrock performer intake for small block. very clean and in good shape. cost $115 new in summit. i`ll take $60 plus the ride, thanks, eric.

suville · 01-08-2005, 04:10 PM

Is it possible to get pics of the head flange mating surface? Electrolisis usually does a number on aluminum intakes. And what would shipping to 98264 cost? Thanks for your time.

CHEVYE · 01-08-2005, 04:51 PM

sorry for poor pic quality. all mating surfaces are excellent, it was not in use for very long. i`d have to check on shipping but i would probably guess $10-$12, thanks, eric.

CHEVYE · 01-08-2005, 11:00 PM

ttt.

CHEVYE · 01-10-2005, 03:05 PM

ttt.... one more time, no one needs this?

Putter · 01-10-2005, 05:22 PM

That isn't the one from my (pending) smallbock is it???? (**cringing slightly**)

CHEVYE · 01-10-2005, 05:57 PM

no sir! yours is brand new out of the box and hasn`t even had a carb on it yet. i`ve got 3 of these and a rpm air gap laying in the garage, i just need to lighten up on all of this stuff laying around.

vtblazer · 01-10-2005, 06:07 PM

Quote:

Originally Posted by CHEVYE

a rpm air gap

Is it for sale also?
If so, could you let me know via pm about cost/condition please?
Thanks.

Putter · 01-10-2005, 06:07 PM

Wheeeew. I was startin' to fret there for a second. Oh well, quittin' time. Gotta' get home for supper!

CHEVYE · 01-10-2005, 06:37 PM

Quote:

Originally Posted by vtblazer

Is it for sale also?
If so, could you let me know via pm about cost/condition please?
Thanks.

nah, that one`s going on my baby.

LUV2XCLR8 · 01-10-2005, 06:49 PM

ERIC

HOW ARE YOU GOING TO GET MY FENDERS HERE THIS
WEEKEND WITH ALL OF THIS STUFF LOADED INTO YOUR RIDE

vtblazer · 01-10-2005, 06:49 PM

Quote:

Originally Posted by CHEVYE

nah, that one`s going on my baby.

Figures...had to ask though. Thanks for the reply.

CHEVYE · 01-10-2005, 07:03 PM

Quote:

Originally Posted by LUV2XCLR8

ERIC

HOW ARE YOU GOING TO GET MY FENDERS HERE THIS
WEEKEND WITH ALL OF THIS STUFF LOADED INTO YOUR RIDE

i`ve got the engine/trans strapped to a pallet on the back of the truck. and the rest in boxes.

01-08-2005, 02:17 AM	#1
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	edelbrock intake f/s edelbrock performer intake for small block. very clean and in good shape. cost $115 new in summit. i`ll take $60 plus the ride, thanks, eric. Attached Images __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-08-2005, 04:51 PM	#3
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	sorry for poor pic quality. all mating surfaces are excellent, it was not in use for very long. i`d have to check on shipping but i would probably guess $10-$12, thanks, eric. Attached Images __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-08-2005, 11:00 PM	#4
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	ttt. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-10-2005, 03:05 PM	#5
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	ttt.... one more time, no one needs this? __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-10-2005, 05:22 PM	#6
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	That isn't the one from my (pending) smallbock is it???? (cringing slightly) __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-08-2005, 04:10 PM	#2
suville Registered User Join Date: Jun 2003 Location: Mtn. Home, Idaho Posts: 906	Is it possible to get pics of the head flange mating surface? Electrolisis usually does a number on aluminum intakes. And what would shipping to 98264 cost? Thanks for your time.

01-10-2005, 05:57 PM	#7
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	no sir! yours is brand new out of the box and hasn`t even had a carb on it yet. i`ve got 3 of these and a rpm air gap laying in the garage, i just need to lighten up on all of this stuff laying around. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-10-2005, 06:07 PM	#9
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Wheeeew. I was startin' to fret there for a second. Oh well, quittin' time. Gotta' get home for supper! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-10-2005, 06:49 PM	#11
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	ERIC HOW ARE YOU GOING TO GET MY FENDERS HERE THIS WEEKEND WITH ALL OF THIS STUFF LOADED INTO YOUR RIDE __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.